Poor Quality Hazard Switch

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Poor Quality Hazard Switch

Postby gwiz22 » Thu 18.03.2021, 20:44

It's looking like I'm going to need a new hazard light switch. I've managed to find a guy (alli60) who has sold a few on ebay, however, there is one feedback comment of "Poor Quality". Has anybody in the forum bought one of these switches and if so are they so poor as not to be worth using?
gwiz22
Newbie
 
Posts: 19
Joined: Sat 26.09.2020, 10:51

Re: Poor Quality Hazard Switch

Postby clemo » Sat 20.03.2021, 13:20

Hi there ,
This may not be a unit failure , rather a lack of use error. Take it out and clean up the pins , or just switch it on and off 50 times . this usually sorts out the issue .
Jim Clark S2 - 1/12. The one with the Yellow spoke wheels . No 613 on dash (pushed in to factory in wrong order 615 on tub)
User avatar
clemo
LEC Administrator
 
Posts: 5069
Joined: Mon 21.04.2003, 23:24
Location: TORQUAY Devon. Cream first then Jam obviously.

Re: Poor Quality Hazard Switch

Postby Saltire » Sat 20.03.2021, 15:20

gwiz22 wrote:It's looking like I'm going to need a new hazard light switch. I've managed to find a guy (alli60) who has sold a few on ebay, however, there is one feedback comment of "Poor Quality". Has anybody in the forum bought one of these switches and if so are they so poor as not to be worth using?

It’s worth noting that the one being sold on eBay by this vendor is NOT a genuine M100 hazard switch. The description mentions that it has a white triangle logo on the front, which makes it a Vauxhall switch (probably from a Carlton). Having said that, it’s likely to work OK (assuming it’s serviceable), but it won’t look the same.

I would agree with Clemo’s diagnosis and cure.
Jonathan

1995 Elan S2, BRG - Now sadly sold
Mrs Saltire’s 2021 Mini Countryman Cooper S
Mrs Saltire’s 2022 BMW i3S
User avatar
Saltire
God
 
Posts: 2457
Joined: Sun 05.04.2015, 22:27
Location: Left foot in Wiltshire, right foot in Gloucestershire, heart in Scotland

Re: Poor Quality Hazard Switch

Postby GeoffSmith » Sat 20.03.2021, 18:06

There have been some concerns raised on FaecesBook but I haven't managed to get to the bottom of why.

Image
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire

Re: Poor Quality Hazard Switch

Postby gwiz22 » Sun 21.03.2021, 19:52

Hi All,

Thanks for your experiences. I went ahead and bought the switch off ebay from alli60. I asked him in advance about the "poor quality" feedback on ebay. He said he only had this one comment in the 20 he had sold so far. He also mentioned that the chap who made the comment didn't ask for his money back, so I guess the chap was happy to use the switch or was rich enough to throw it in the bin. Anyway for me the switch came next day and I have to say I have no ability to say whether it is poor quality or not. It clicks on and off. alli60 said if I didn't like it, I could send it back. I guess you can't say fairer than that. I've not installed the switch, hoping to do it later this week.
I'll advise whether it works or not.
Regards
Graham
gwiz22
Newbie
 
Posts: 19
Joined: Sat 26.09.2020, 10:51


Return to Elan Products for Sale (Used Products for Sale)

Who is online

Users browsing this forum: No registered users and 2 guests