MAP sensor damper/filter

Alternator, waterpump, A/C, sensors, CAS, etc.

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

MAP sensor damper/filter

Postby Lotus54 » Fri 11.11.2011, 22:44

I was replacing all my coolant hoses and in the process managed to snap off the end of the MAP sensor damper/filter. The little screw in unit that goes on the right side of the intake manifold.

Any ideas of the replacement number or anything?

(dang I felt dumb)

Good thing, I now have all new coolant hoses, new timing belt/bearings, new drive belts, new coils/ plug wires, new coolant tank and more.

Mark
1978 Benelli 750 sei, 1972 Benelli 175 Enduro, 2018 Beta Xtrainer 300
User avatar
Lotus54
Enthusiast
 
Posts: 191
Joined: Tue 26.07.2011, 04:10
Location: Port Angeles, WA USA

Re: MAP sensor damper/filter

Postby saska » Fri 11.11.2011, 23:09

Lotus54 wrote:managed to snap off the end of the MAP sensor damper/filter. The little screw in unit that goes on the right side of the intake manifold.
Any ideas of the replacement number or anything?

A100E6517S
Looks like it may be available from SJ Sportscars
--
Tony
adw (at) saska.co.uk
saska
Sadly departed but never forgotten
 
Posts: 519
Joined: Tue 16.08.2005, 20:34
Location: Cumbria, UK

Re: MAP sensor damper/filter

Postby Lotus54 » Sat 12.11.2011, 00:32

Thanks for the info.

I'm going to see if I glue in an extension in the meantime.

Mark
1978 Benelli 750 sei, 1972 Benelli 175 Enduro, 2018 Beta Xtrainer 300
User avatar
Lotus54
Enthusiast
 
Posts: 191
Joined: Tue 26.07.2011, 04:10
Location: Port Angeles, WA USA

Re: MAP sensor damper/filter

Postby rmsmall » Sat 20.04.2013, 00:49

Being stupid, I have had to find out if one is on this side of the pond. Dave Bean has it for $30 plus shipping. It's only 11 pounds on your side at SJ but I think I will get it quicker from DB.
My daughters let me drive once in a while!
User avatar
rmsmall
Newbie
 
Posts: 28
Joined: Tue 09.06.2009, 14:34
Location: Hudson, OH USA


Return to Engine Ancillaries

Who is online

Users browsing this forum: No registered users and 5 guests