Red Warning "(!)" light appears under braking

Alternator, waterpump, A/C, sensors, CAS, etc.

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Postby Scott J » Wed 21.09.2005, 15:14

M100two,

got your email, there are different part no's listed on that and on parts manual CD I got from Sy.

Understand there is an upgrade kit = pair of 2/15 valves and 2 brake pipes =
A100J6049S

your pdf shows diff parts and mentions the 2 P clips which you purchased. Do you still have the invoice with the part numbers purchased and how current is it.

Looks like A100J6049S plus the 2 P clips A082W6579F......just want to double check...... and approx..... cost before I get my garage to start fabricating brake lines.

Murray Motors Glasgow are a bunch of donkeys who think Lotus were founded in 2001 to manufacture Elise S11's.
User avatar
Scott J
The prodigal son
 
Posts: 2277
Joined: Mon 15.12.2003, 17:47
Location: Westerton, Glasgow

Postby M100 TWO » Wed 21.09.2005, 16:35

Scott you require


2 off valve-brake YA082J4495F £69.64
2 off p clip YA082W6579F £ 4.76
1 off brake pipe YA082J4493F £ 2.85
1 off brake pipe YA082J4494F £ 1.92
total cost including vat £79.17

the price of the pipes it is not worth having them made up the pipes have a convex flare and a concave flare at each end be carefull!!!!
I found I needed to lengthen the pipe on the offside from flexy hose to valve which I had made up at the brake factors

these prices are at 17-6-05 with that fluid loss you might have to paint the underside where it has gone soft
Don't try to defie the law of physics! here endeth the first lesson
User avatar
M100 TWO
God
 
Posts: 926
Joined: Thu 02.10.2003, 14:49
Location: southampton

Previous

Return to Engine Ancillaries

Who is online

Users browsing this forum: No registered users and 4 guests