Hardtops

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Hardtops

Postby tbashworth » Sun 08.06.2008, 10:33

Does anyone have a contact number or email for Hardtops? Are they still available?
tbashworth
Newbie
 
Posts: 2
Joined: Sun 08.06.2008, 10:09
Location: Manchester

Postby Sy V » Sun 08.06.2008, 10:58

Yes, there are references to them all over the forum and Wiki. But look here: http://www.spcdesign.co.uk/
and,
http://wikilec.9600.org/index.php/Hard_top













See, I can do the pleasant helpful thing, too... despite the fact that you registered as a member and asked this question within five minutes of joining - research not your strong point then?
:wink:
Image

Talk and song from tongues of lilting grace, sounds caress my ears but not a word I heard could I relay, the story was quite clear - Robert Plant

In Respectful Memory - 21st March 1959 - 14th February 2016
User avatar
Sy V
LEC Godfather
 
Posts: 5794
Joined: Mon 21.04.2003, 07:06
Location: Lydiate Ash, Bromsgrove, Worcestershire.

Hard Top

Postby tbashworth » Sun 08.06.2008, 15:08

Many thanks
tbashworth
Newbie
 
Posts: 2
Joined: Sun 08.06.2008, 10:09
Location: Manchester

Hardtop

Postby niall » Sun 15.06.2008, 22:49

I wonder if anyone has a strong recommendation for a skilled fitter and painter for a hardtop? I have one which will need the usual adjustment to fit and would now like to have the work done. I would also like a set of the latest seals. Are they available from Simon, or elsewhere?
User avatar
niall
Fanatic
 
Posts: 431
Joined: Tue 26.08.2003, 22:16
Location: Ardfern

Re: Hardtop

Postby Kuching » Mon 16.06.2008, 10:50

niall wrote:I wonder if anyone has a strong recommendation for a skilled fitter and painter for a hardtop? I have one which will need the usual adjustment to fit and would now like to have the work done. I would also like a set of the latest seals. Are they available from Simon, or elsewhere?


Is this an SPC hardtop Niall - if so we would be able to upgrade the seals and fit it. If its not, I couldn't be sure if our seals would fit, but we could try them anyway.
User avatar
Kuching
Fanatic
 
Posts: 683
Joined: Tue 06.04.2004, 21:17
Location: Cambridgeshire, UK

Hardtop

Postby niall » Wed 18.06.2008, 09:16

Simon, The H/T is I believe one of yours. I bought it from Paul Matty who had a few from you.
I would certainly be interested in having you fit it. The glass has already been bonded in but that is all that has been done. I'm happy to continue this here, or if you prefer, by PM. You might like everybody else to hear what you can do and at what price, and what I think of it?
Thanks.
User avatar
niall
Fanatic
 
Posts: 431
Joined: Tue 26.08.2003, 22:16
Location: Ardfern

Postby Sy V » Wed 18.06.2008, 09:47

Niall

Hi, did I tell you about the flocking place on the southern edge of Kiddy on the Hoo Farm Industrial Estate (A449 Worcester Road)?

They did the interior of mine and the finish is quite stunning.
Image

Talk and song from tongues of lilting grace, sounds caress my ears but not a word I heard could I relay, the story was quite clear - Robert Plant

In Respectful Memory - 21st March 1959 - 14th February 2016
User avatar
Sy V
LEC Godfather
 
Posts: 5794
Joined: Mon 21.04.2003, 07:06
Location: Lydiate Ash, Bromsgrove, Worcestershire.

Postby Doug » Wed 18.06.2008, 09:51

Sy V wrote:They did the interior of mine and the finish is quite stunning.


so you're saying they did a flocking great job ? :wink:
Image
User avatar
Doug
LEC Founder
 
Posts: 7468
Joined: Thu 17.04.2003, 06:43
Location: Oregon Coast, USA

Postby Sy V » Wed 18.06.2008, 09:55

Who said the Americans didn't have a sense of humour... even if they can't spell it!

:D
Image

Talk and song from tongues of lilting grace, sounds caress my ears but not a word I heard could I relay, the story was quite clear - Robert Plant

In Respectful Memory - 21st March 1959 - 14th February 2016
User avatar
Sy V
LEC Godfather
 
Posts: 5794
Joined: Mon 21.04.2003, 07:06
Location: Lydiate Ash, Bromsgrove, Worcestershire.

Hardtop

Postby niall » Wed 18.06.2008, 19:44

Hi Sy, You may have mentioned the place a long time ago but with an endorsement like that, they'll all be flocking there. :wink:
I'll see what Simon says about flocking and in particular whether it is sensible to do the different parts of the job separately. Certainly that would add to the hassle and transport.
User avatar
niall
Fanatic
 
Posts: 431
Joined: Tue 26.08.2003, 22:16
Location: Ardfern

Postby Sy V » Wed 18.06.2008, 22:00

I agree, but that's where Simon sent his early hardtops too.
Image

Talk and song from tongues of lilting grace, sounds caress my ears but not a word I heard could I relay, the story was quite clear - Robert Plant

In Respectful Memory - 21st March 1959 - 14th February 2016
User avatar
Sy V
LEC Godfather
 
Posts: 5794
Joined: Mon 21.04.2003, 07:06
Location: Lydiate Ash, Bromsgrove, Worcestershire.

Hardtop

Postby niall » Thu 19.06.2008, 22:06

Thanks Sy. That place must be the dog's flockocks.
User avatar
niall
Fanatic
 
Posts: 431
Joined: Tue 26.08.2003, 22:16
Location: Ardfern

Postby Cesare » Fri 25.07.2008, 17:46

Hi guys

Any idea of a price for an hard top ? from SPC ?

Thanks

Cesar
User avatar
Cesare
Tinkerer
 
Posts: 95
Joined: Sat 05.04.2008, 16:45
Location: Normandy


Return to Hood/Top, Bodywork and Fittings

Who is online

Users browsing this forum: No registered users and 5 guests

cron