Hello
I am in desperate need of some window washers for my Elan M100, does anyone know if the Elan shares the same washers with a GM car?
Currently finding it quite a mission to try and find a pair.
Thanks in Advance
| Home | WikiLEC | Repairs | Upgrades | Gallery | Buy & Sell | Mountain Chips | Meets & Events | Contact |
|
Window Washers???? =S
Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
9 posts
• Page 1 of 1
Re: Window Washers???? =S
by Specky » Tue 18.11.2008, 22:01
Give us a clue what you're after... 
Windsreen Washer jets?
Side Window metal washers?
TTFN
Windsreen Washer jets?
Side Window metal washers?
TTFN
If you have a problem, if no one else can help, and if you can find them, maybe you can hire... The N/A-Team.
-
Specky - Moderator
- Posts: 5982
- Joined: Sun 07.09.2003, 23:19
- Location: Swindon
Re: Window Washers???? =S
by TurboTwell » Tue 18.11.2008, 22:44
Yes sorry
I am after the jets on the bonnet.
I am after the jets on the bonnet.
If in doubt FLAT OUT
-
TurboTwell - Newbie
- Posts: 2
- Joined: Wed 19.12.2007, 00:42
- Location: Derbyshire
Re: Window Washers???? =S
by Bolsom » Wed 19.11.2008, 19:47
Stupid boy Pike!! Bonnet is not English for trunk! 
Colin
Colin
-
Bolsom - Fanatic
- Posts: 255
- Joined: Fri 02.05.2003, 17:37
- Location: Nr. Limoux, France
Re: Window Washers???? =S
by dkellis » Thu 20.11.2008, 04:47
In the US you can contact Dave Bean Engineering. That's where I got a set.
They even taught me the trick of using a pin (such as a sewing pin) to adjust the direction of the nozzles' streams.
They even taught me the trick of using a pin (such as a sewing pin) to adjust the direction of the nozzles' streams.
Seattle, WA, USA
- dkellis
- Newbie
- Posts: 43
- Joined: Mon 03.10.2005, 20:58
- Location: Seattle, WA, USA
Re: Window Washers???? =S
by Ade » Thu 20.11.2008, 13:18
Hi,
I changed my jets and had no trouble finding jets. They are not the same as lotus but do the job and look good. All my local auto shops had them it was just a case of getting a good match. I think I got them in the end from halfords.
Ade
I changed my jets and had no trouble finding jets. They are not the same as lotus but do the job and look good. All my local auto shops had them it was just a case of getting a good match. I think I got them in the end from halfords.
Ade
- Ade
- Fanatic
- Posts: 311
- Joined: Tue 22.04.2003, 19:40
- Location: Broseley,Shropshire
Re: Window Washers???? =S
by max and andy » Mon 23.03.2009, 10:07
Do the jets and the couplings just pull apart ?I don't want to bugger them up being to forceful. Andy
- max and andy
- God
- Posts: 923
- Joined: Fri 13.02.2009, 07:07
- Location: Farnham Surrey England
Re: Window Washers???? =S
by clemo » Mon 23.03.2009, 21:20
give BNZ a shout on ebay..
hes breaking an elan and would wip them off the bonnet he has for sale...
if you need windo washers den dem polish folk at the disused petrol station at the bottom of my road do de ole car of £4 or 10,000 zlotty.
welcome to LEC by the way!
hes breaking an elan and would wip them off the bonnet he has for sale...
if you need windo washers den dem polish folk at the disused petrol station at the bottom of my road do de ole car of £4 or 10,000 zlotty.
welcome to LEC by the way!
Jim Clark S2 - 1/12. The one with the Yellow spoke wheels . No 613 on dash (pushed in to factory in wrong order 615 on tub)
-
clemo - LEC Administrator
- Posts: 5069
- Joined: Mon 21.04.2003, 23:24
- Location: TORQUAY Devon. Cream first then Jam obviously.
9 posts
• Page 1 of 1
Return to Hood/Top, Bodywork and Fittings
Who is online
Users browsing this forum: No registered users and 4 guests