Help with heatshield position

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Help with heatshield position

Postby jamherber » Wed 02.04.2025, 13:30

After some help following the top end rebuild on car which we started back in September.

Finally got it fired up last weekend and plan to get the timing sorted etc this coming weekend (exciting!).

In the process of reattaching all the heat shields but really can't workout or remember where this one came from

IMG_7169.JPG


Any help greatly appreciated!
You do not have the required permissions to view the files attached to this post.
jamherber
Newbie
 
Posts: 36
Joined: Wed 21.08.2024, 11:43

Re: Help with heatshield position

Postby Tuga2112 » Wed 02.04.2025, 13:33

i would have to check my car.

have you checked aroudn the turbo on the (not so) flexible hose which i believe leads to the EGR ?
Still learning
Youtube Channel @Tuga2112 M100 repair videos
User avatar
Tuga2112
God
 
Posts: 3039
Joined: Fri 12.09.2014, 22:54
Location: Durham with a regular trip to Walsall

Re: Help with heatshield position

Postby KenS » Wed 02.04.2025, 14:22

The smaller shields are fitted behind the turbo, really hard to reach with turbo, manifold and hose in place. Added a few photos which just about shows the smaller left and right shields.

shield3.JPG


shield1.JPG


shield2.JPG
You do not have the required permissions to view the files attached to this post.
S2 M100 NMY #285
N/A 2010 Evora
User avatar
KenS
Fanatic
 
Posts: 278
Joined: Mon 27.10.2014, 21:04
Location: North Kent Coast

Re: Help with heatshield position

Postby jamherber » Wed 02.04.2025, 17:48

Many thanks - hoping we can squeeze it back in with the turbo still on.
jamherber
Newbie
 
Posts: 36
Joined: Wed 21.08.2024, 11:43


Return to Turbos, Boost, and Intakes

Who is online

Users browsing this forum: No registered users and 4 guests