Adjustable wastegate actuator

[nitroman]

Hey peeps, by drilling 2-holes into our existing wastegate-mount and getting a couple of bolts this offers an alternative to either an MBC or Alan's chip. It certainly keeps things simple by not using any parts that aren't there already. Just disconnect and cap the final BSV tube (unplug the electrical line too so the BSV is not just "going through the motions", set the actuator to the max of 9PSI and you've just made yourself a simple & nice performance upgrade!
http://www.flyinmiata.com/index.php?deptid=4524&parentid=0&stocknumber=02-70570
http://www.flyinmiata.com/index.php?deptid=1594&parentid=0&stocknumber=02-70571

I very well may do this on my new setup to have nice shiny parts!