Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
by ermete trismegisto » Fri 29.04.2022, 07:49
Good morning everyone. I'm having the head gasket change, and for safety I want to change the bolts too. Can anyone tell me where I can find them at a reasonable price?
-

ermete trismegisto
- Newbie
-
- Posts: 14
- Joined: Fri 30.06.2017, 16:48
- Location: Brescia, Lombardia, Italia
by HJ2 » Fri 29.04.2022, 10:48
Why change?
They are re-usable

If you always do what you always did, you always get what you always got
-

HJ2
- Wodan - God of the Low Lands
-
- Posts: 4405
- Joined: Fri 06.06.2008, 10:54
- Location: Delft, the Netherlands
by ermete trismegisto » Sun 01.05.2022, 11:09
HJ2 wrote:Why change?
They are re-usable

I prefer to change them. I had other experiences where, to save money, they were not changed. And I had to redo the job by spending a lot more.
-

ermete trismegisto
- Newbie
-
- Posts: 14
- Joined: Fri 30.06.2017, 16:48
- Location: Brescia, Lombardia, Italia
by Saltire » Sun 01.05.2022, 11:15
SJ Sportscars have them, at a price, as do
Kelvedon Lotus. I can’t see any at Rock Auto, following a quick scan, although I usually get my engine parts from them.
Jonathan
1995 Elan S2, BRG - Now sadly sold
Mrs Saltire’s 2021 Mini Countryman Cooper S
Mrs Saltire’s 2022 BMW i3S
-

Saltire
- God
-
- Posts: 2457
- Joined: Sun 05.04.2015, 22:27
- Location: Left foot in Wiltshire, right foot in Gloucestershire, heart in Scotland
by HJ2 » Sun 01.05.2022, 11:19
They don’t stretch, don’t rust, don’t get damaged and Lotus does not specify them to be replaced.
I’ve done 7 m100 heads so far, never a problem
But if it helps sleeping, replacement does not hurt either (besides the wallet…)
Good luck
If you always do what you always did, you always get what you always got
-

HJ2
- Wodan - God of the Low Lands
-
- Posts: 4405
- Joined: Fri 06.06.2008, 10:54
- Location: Delft, the Netherlands
by Fredjohn » Sun 01.05.2022, 11:21
Different engine designs use different types of bolt. Some stretch, some do not. Some are re-usable, some are not.
It is possible your bad experience was an engine that used bolts that must be replaced.
The Elan bolts are re-usable.
La vie passe vite: vivez la avec élan.
Elan SE turbo 1992
Emira 2023
Mercedes Benz C200 estate
Lotus Evija Danish edition
-

Fredjohn
- God
-
- Posts: 2537
- Joined: Tue 21.08.2012, 00:30
- Location: Malvern, Worcs
by ermete trismegisto » Tue 03.05.2022, 22:39
Alla fine li ho comprati da SJ. Ho cercato di fare l’ordine sul sito di Kelvedon, ma non appariva la pagina per i pagamenti. Non capisco perché.
Rockauto, dove ho preso la guarnizione, non ha i bulloni. Penso li abbiano terminati.
Ora aspetto che arrivino dall’ U.K. , e finalmente potrò andare a spasso tranquillamente con mELANie. Finalmente!
Grazie a tutti per le risposte. E chissà che non ci si trovi a qualche raduno!
-

ermete trismegisto
- Newbie
-
- Posts: 14
- Joined: Fri 30.06.2017, 16:48
- Location: Brescia, Lombardia, Italia
by Fredjohn » Wed 04.05.2022, 07:49
For those like me who only do restaurant Italian, here's a translation:
Eventually I bought them from SJ. I tried to place the order on the Kelvedon website, but the payment page did not appear. I do not understand why.
Rockauto, where I got the gasket, has no bolts. I think they finished them.
Now I wait for them to arrive from the U.K. , and finally I can go for a walk safely with mELANie. Finally!
Thanks everyone for the answers. And who knows if you are not at some gathering!
La vie passe vite: vivez la avec élan.
Elan SE turbo 1992
Emira 2023
Mercedes Benz C200 estate
Lotus Evija Danish edition
-

Fredjohn
- God
-
- Posts: 2537
- Joined: Tue 21.08.2012, 00:30
- Location: Malvern, Worcs
by ermete trismegisto » Wed 04.05.2022, 22:46
Fredjohn wrote:For those like me who only do restaurant Italian, here's a translation:
Eventually I bought them from SJ. I tried to place the order on the Kelvedon website, but the payment page did not appear. I do not understand why.
Rockauto, where I got the gasket, has no bolts. I think they finished them.
Now I wait for them to arrive from the U.K. , and finally I can go for a walk safely with mELANie. Finally!
Thanks everyone for the answers. And who knows if you are not at some gathering!
Coorrect!

-

ermete trismegisto
- Newbie
-
- Posts: 14
- Joined: Fri 30.06.2017, 16:48
- Location: Brescia, Lombardia, Italia
Return to Engine
Who is online
Users browsing this forum: Apple [Bot] and 7 guests