ElanScan - help reviewing

[Paul Hague]

Could anyone take a look at an ElanScan for me?

Got (three of four times) a momentary hesitation and CEL illumination on the way up to Prescott last weekend, but nothing on the way back or on a short trip today (which is where the scan is from). Nothing obvious to provoke the problem, just cruising along at steady revs.

I can see fault code 41 is stored, so I guess I should be ordering a new Hall Effect Sensor, but is there anything else that shows itself in today's scan?

13-oct-11.zip

Thanks in advance.

[saska]

I can see fault code 41 is stored, so I guess I should be ordering a new Hall Effect Sensor, but is there anything else that shows itself in today's scan?

Can't see anything obvious on the scan.
Temps look good, EGR, secondary throttle are working, A/F ratio looks good -- down to 10.3 under high revs/boost. There are 2 knock events but no retard is applied so wouldn't worry.
Max boost is 0.67Bar which for a std 1499 is pretty close to spot on.
Think doing the CAS fault (HES) looks the way forward. Then see if the fault has gone.

[Paul Hague]

Excellent. Thank you.