How to remove the door speaker grills ?

[simonbuk]

Do you have to remove the door cards to get behind the speaker grills ? Or can you grills/covers be prized out ?

Did have a search and looked at WikiLEC but couldn't find anything.

[TorqueHorse]

You need to take the door card off, or at least you do if you want to retain the metal grille for reuse. But, FYI, I have my door card off right now, and I still don't know if I can take the grille out without destroying it. I might just mask the grille on the door card and spray it while attached.

[simonbuk]

I might just mask the grille on the door card and spray it while attached.

I was thinking of doing the same !!

[Tuga2112]

isnt it just bent metal around to hold it to the door card ? i think i recall seeing that on mine

[dapinky]

The grille (on mine anyway) is just a bit of mesh bent to shape and pushed into the door card from behind (the spring tension of the material holds it in place).

[simonbuk]

The grille (on mine anyway) is just a bit of mesh bent to shape and pushed into the door card from behind (the spring tension of the material holds it in place).

Just to confirm - Yes, its just 4 simple extra bits of the speaker wire bent back to keep it in place, accessed from behind.