Hello all, does anyone know what the 10v rectifier looks like? It's the one used to power the oil and boost pressure gauges.
Thank you.
Andrew.
| Home | WikiLEC | Repairs | Upgrades | Gallery | Buy & Sell | Mountain Chips | Meets & Events | Contact |
|
10v Gauge Rectifier/Step Down
Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
3 posts
• Page 1 of 1
10v Gauge Rectifier/Step Down
by AJSGSE1990 » Mon 29.06.2026, 06:45
-
AJSGSE1990 - Tinkerer
- Posts: 95
- Joined: Fri 16.01.2026, 15:16
- Location: Great Saling, Essex, United Kingdom
Re: 10v Gauge Rectifier/Step Down
by RonR » Mon 29.06.2026, 12:34
It looks like a TO220 voltage regulator or transistor with a screw-on heat sink. It sits on the side of the cluster.
BUT don't replace it with a standard 10v regulator as the pinouts are different!
https://en.wikipedia.org/wiki/TO-220
BUT don't replace it with a standard 10v regulator as the pinouts are different!
https://en.wikipedia.org/wiki/TO-220
-
RonR - Fanatic
- Posts: 723
- Joined: Mon 22.08.2016, 20:25
- Location: Bromley
Re: 10v Gauge Rectifier/Step Down
by AJSGSE1990 » Mon 29.06.2026, 19:18
RonR wrote:It looks like a TO220 voltage regulator or transistor with a screw-on heat sink. It sits on the side of the cluster.
Found it thank you. Thought it might have some noise attenuators and diodes so was looking for a bit more.
Cheers,
Andrew.
-
AJSGSE1990 - Tinkerer
- Posts: 95
- Joined: Fri 16.01.2026, 15:16
- Location: Great Saling, Essex, United Kingdom
3 posts
• Page 1 of 1
Return to Electrical / Electronics / Stereo / Lights etc.
Who is online
Users browsing this forum: No registered users and 7 guests