| Home | WikiLEC | Repairs | Upgrades | Gallery | Buy & Sell | Mountain Chips | Meets & Events | Contact |
|
spark plug tool
Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
10 posts
• Page 1 of 1
spark plug tool
by mvf906 » Thu 28.05.2009, 13:20
can anyone tell me if there is a special tool to remove the spark plugs and if so where to buy ?
me in my head, shifting & drifting, mechanical music, adrenaline surge
-
mvf906 - Enthusiast
- Posts: 104
- Joined: Mon 30.07.2007, 09:29
- Location: west sussex
Re: spark plug tool
by HJ2 » Thu 28.05.2009, 13:52
You'll need a sparkplug socket.
It comes with almost every quality socket-set. If i recall right there is a tread about the Halfords professional line socket set.
I believe it's worth checking it out if you are at a start with your tool collection!
http://www.halfords.com/webapp/wcs/stor ... yId_165572
Best regards,
Henk-Jan
It comes with almost every quality socket-set. If i recall right there is a tread about the Halfords professional line socket set.
I believe it's worth checking it out if you are at a start with your tool collection!
http://www.halfords.com/webapp/wcs/stor ... yId_165572
Best regards,
Henk-Jan
If you always do what you always did, you always get what you always got
-
HJ2 - Wodan - God of the Low Lands
- Posts: 4405
- Joined: Fri 06.06.2008, 10:54
- Location: Delft, the Netherlands
Re: spark plug tool
by mvf906 » Thu 28.05.2009, 17:25
Hi HJ2,
I have a normal spark plug socket, which didn't fit, so I bought a box spanner and that's still too big to fit into the space !
I have a normal spark plug socket, which didn't fit, so I bought a box spanner and that's still too big to fit into the space !
me in my head, shifting & drifting, mechanical music, adrenaline surge
-
mvf906 - Enthusiast
- Posts: 104
- Joined: Mon 30.07.2007, 09:29
- Location: west sussex
Re: spark plug tool
by HJ2 » Thu 28.05.2009, 17:53
How does the socket not fit?
Is it not long enough to reach the plug completely? (buy an extension)
Is the plug hex. diameter incorrect? (buy a correct socket)
Is the socket to thick to fit in the hole? (buy a socket that fit's)
The correct socket is laying arond waiting for you to buy it
Is it not long enough to reach the plug completely? (buy an extension)
Is the plug hex. diameter incorrect? (buy a correct socket)
Is the socket to thick to fit in the hole? (buy a socket that fit's)
The correct socket is laying arond waiting for you to buy it
If you always do what you always did, you always get what you always got
-
HJ2 - Wodan - God of the Low Lands
- Posts: 4405
- Joined: Fri 06.06.2008, 10:54
- Location: Delft, the Netherlands
Re: spark plug tool
by Monty » Thu 28.05.2009, 17:54
You just need a 16mm spark plug socket to use with a socket set/torque wrench
http://shop.ebay.co.uk/16mm%20spark%20p ... ket&_naf=1
If you don`t have a socket set then maybe one off these
http://shop.ebay.co.uk/items/?_nkw=16mm ... &_osacat=0
http://shop.ebay.co.uk/16mm%20spark%20p ... ket&_naf=1
If you don`t have a socket set then maybe one off these
http://shop.ebay.co.uk/items/?_nkw=16mm ... &_osacat=0
-
Monty - Chunder King!
- Posts: 7977
- Joined: Sun 11.01.2004, 22:32
- Location: Leeds
Re: spark plug tool
by paulrwebster » Thu 28.05.2009, 17:56
Isn't there one in the toolset in the boot?
499 Rubbish posts, Always a fanatic, never a God.
-
paulrwebster - Fanatic
- Posts: 527
- Joined: Sat 28.01.2006, 18:15
- Location: Haywards Heath, West Sussex
Re: spark plug tool
by mvf906 » Thu 28.05.2009, 18:04
didn't have a kit in mine 
is it a thin walled socket I need ?
is it a thin walled socket I need ?me in my head, shifting & drifting, mechanical music, adrenaline surge
-
mvf906 - Enthusiast
- Posts: 104
- Joined: Mon 30.07.2007, 09:29
- Location: west sussex
Re: spark plug tool
by dapinky » Thu 28.05.2009, 18:06
It's the same tool as BL supply for sparkplugs on a Dolomite Sprint!
Dave
Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it
...oh, and a 2006 Freelander destined for the jungles of The Gambia - 4500 miles across roads, desert and tracks - what could possibly go wrong?
Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it
...oh, and a 2006 Freelander destined for the jungles of The Gambia - 4500 miles across roads, desert and tracks - what could possibly go wrong?
-
dapinky - LEC Administrator
- Posts: 10605
- Joined: Sun 15.10.2006, 12:54
- Location: As far west as you can get in West Wales before you become Irish (Pembroke Dock).
Re: spark plug tool
by HJ2 » Thu 28.05.2009, 18:08
mvf906 wrote:didn't have a kit in mine
See Monty's post...
If you always do what you always did, you always get what you always got
-
HJ2 - Wodan - God of the Low Lands
- Posts: 4405
- Joined: Fri 06.06.2008, 10:54
- Location: Delft, the Netherlands
Re: spark plug tool
by mvf906 » Thu 28.05.2009, 18:17
will get a sealy thin wall one from monty's ebay link ta 
me in my head, shifting & drifting, mechanical music, adrenaline surge
-
mvf906 - Enthusiast
- Posts: 104
- Joined: Mon 30.07.2007, 09:29
- Location: west sussex
10 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 3 guests