kmckmc DoubleHoops Rollover Bar - COMPLETED and in black
Posted: Fri 27.04.2007, 06:57Hi,
I am in the process of making a newly designed DoubleHoops Rollover Bar for Elan M100. It began in early April. What I have shown here is not the END PRODUCT. The guy who undertakes this project has designed/manufactured FIA approved rollover cages. He promised to do a good job for Elan M100.
Thus far, Reinforcement has been made to places where Elan M100's rear speakers are located. This involves drilling some additional holes for that reinforcement plate's installation.
This particular RollOver Bar is made for M100s with S2 console. It can be made for standard SE console.
Special features:
Sideway Rigidity
LOWER REINFORCEMENT to rollover bar and
Additional Stability
SIDE REINFORCEMENT TO B-POSTS (need modification to plastic B-POSTS parts.
Before installation picture:
This is the doublehoops rollover bar model:
This has a lower horizontal reinforcement feature.
It also has 2 sidebar reinforcements to both B-posts.
RB backside:
RB sideview: (doubleclick image to enlarge)
RB lower plate detail:
RB lower plate detail 2:
Installed view:
Another view/ holes are not drilled to the beam yet:
Another view/ the LOWER REINFORCEMENT is S2 console specific:
additional reinforcement on B-posts (yup, B-Post plastic needs some modification):
Another view:
Another view:
Another view:
Another view/ under the soft top:
Last view:
The rollover bar is on its way to be rewelded and painted to black color. It should take about 10 days.
Cheers,
I am in the process of making a newly designed DoubleHoops Rollover Bar for Elan M100. It began in early April. What I have shown here is not the END PRODUCT. The guy who undertakes this project has designed/manufactured FIA approved rollover cages. He promised to do a good job for Elan M100.
Thus far, Reinforcement has been made to places where Elan M100's rear speakers are located. This involves drilling some additional holes for that reinforcement plate's installation.
This particular RollOver Bar is made for M100s with S2 console. It can be made for standard SE console.
Special features:
Sideway Rigidity
LOWER REINFORCEMENT to rollover bar and
Additional Stability
SIDE REINFORCEMENT TO B-POSTS (need modification to plastic B-POSTS parts.
Before installation picture:
This is the doublehoops rollover bar model:
This has a lower horizontal reinforcement feature.
It also has 2 sidebar reinforcements to both B-posts.
RB backside:
RB sideview: (doubleclick image to enlarge)
RB lower plate detail:
RB lower plate detail 2:
Installed view:
Another view/ holes are not drilled to the beam yet:
Another view/ the LOWER REINFORCEMENT is S2 console specific:
additional reinforcement on B-posts (yup, B-Post plastic needs some modification):
Another view:
Another view:
Another view:
Another view/ under the soft top:
Last view:
The rollover bar is on its way to be rewelded and painted to black color. It should take about 10 days.
Cheers,
