Page 1 of 6
Floor Mats Anyone?????

Posted:
Thu 05.07.2007, 20:39
by Elanlover
I recently ordered a set of these:
http://cgi.ebay.com/ebaymotors/Lotus-ES ... enameZWDVW
from a seller on eBay. They are for the Esprit but I was hoping they'd be a close fit. They're "close", but not perfect as you'd imagine. However, they do seem to be of very good quality. I contacted the seller and asked him if he'd be open to creating some specifically for the Elan if I would send him a template from a set that does fit the Elan. He said he'd be open to doing it. I can get a template made that won't be exactly OEM but will fit the Elan very well.
Is anyone interested in jumping on the bandwagon if it works out???

Posted:
Thu 05.07.2007, 23:49
by rip
My current generic mats keep riding forward, underneath my pedals which drives me maaaaad!
So yes, I would be interested.

Posted:
Fri 06.07.2007, 00:44
by Doug
my mat would ride forward too, and if you want to get crazy on it you could build in one or two clip holes in the mat like for more recent cars--then you could put a rivet or such with reinforcement thru the GRP floor with a modern style clip to hold the mat ? ? ?

Posted:
Fri 06.07.2007, 02:14
by Elanlover
I'm familiar with the "musical mat" syndrome you've both described

I get it even with mats that are OEM designed to fit properly

I have seen mat clips that hook into the floor carpet and then grasp the mat to stop it from moving. Would be a cheaper alternative to replacing mats if this is your biggest concern.
Their mats do look good though


Posted:
Fri 06.07.2007, 20:59
by Doug
could always poke a tiny hole in the mat and wrap some twine around the seat frame to keep it from sliding I guess . . .

Posted:
Fri 06.07.2007, 21:22
by John_W
Doug wrote:could always poke a tiny hole in the mat and wrap some twine around the seat frame to keep it from sliding I guess . . .
That's my kinda mod. Cheap and involves baler twine / Araldite / 6" nails.
John

Posted:
Fri 06.07.2007, 21:25
by Matt RI
I would be interested. Would save the wear on my original ones, they are getting a little worn... Please let me know how it works out!
Re: Floor Mats Anyone?????

Posted:
Sat 07.07.2007, 09:48
by al
Elanlover wrote:Is anyone interested in jumping on the bandwagon if it works out???
Looks good to me !
I'd go for a set if you manage to make it happen.

Posted:
Sat 07.07.2007, 10:58
by Enright
Mine is fitted with a set of original mats which I'd be happy to trace around and provide the dimensions for.
I'd suggest that he ACBC legend might be better if it was a little more discreet on any custom made ones though. Like about 2" diameter and situated in the bottom left and bottom right-hand corners.

Posted:
Sun 08.07.2007, 15:15
by Elanlover
Enright13 wrote:Mine is fitted with a set of original mats which I'd be happy to trace around and provide the dimensions for.
I'd suggest that he ACBC legend might be better if it was a little more discreet on any custom made ones though. Like about 2" diameter and situated in the bottom left and bottom right-hand corners.
A pm is on the way to you!

Posted:
Sun 08.07.2007, 15:47
by Gee0
Count me in

Posted:
Sun 08.07.2007, 16:44
by RichardK
Yes please! Count me in too.

Posted:
Thu 12.07.2007, 16:18
by Benmac
I'll take a set too!

Posted:
Thu 12.07.2007, 18:09
by ailwyn
Yet another bandwagon.... damn, I just can't resist..

Posted:
Fri 13.07.2007, 08:50
by Sy V
Shame that their base colour is black...

Posted:
Fri 13.07.2007, 13:38
by Elanlover
Sy V wrote:Shame that their base colour is black...
Well, I can always ask about other colours. I'll be asking about logo placement anyway so i might as well inquire about colours too. Keep in mind that if you're trying to colour match existing yellow carpet (for example

) it will be almost impossible to do and the attempt might not look as good as one would hope. Also, black hides the dirt and scuff marks you're going to get on the mats better than any other colour.
While I rather like the look of the large Lotus logo on their mats I could also ask about a custom logo. Something along the lines of a small Lotus logo followed by some text like "LOTUS ELAN SE" or the like...........

Posted:
Fri 13.07.2007, 21:25
by clemo
i have some knackered ones (both sides) available as a template to use / cut/ destroy
the above ones are a bit too bold for dull old me .. however the LEC logo would be nice....
clemo
(pm me if they are of use)

Posted:
Fri 13.07.2007, 21:33
by Elanlover
Thanks for the offer Clemo. Neil has offered to make some templates and send them to me so I can compare them to the LHD versions I have. Perhaps if he's tardy I'll take you up on your offer

oooh

Posted:
Sat 14.07.2007, 02:00
by Luke - the elanimal
yeah i'll be on that band wagon, im searching for some at the mo on ebay and the like but no luck, these would be awesome.
liking the black and yellow ones.....agree maybe the lotus badge a bit smaller... and or the elan se would be a cool addition too.
how quick doe sthe guy think he can get them done? lol

(eager beaver!!)


Posted:
Mon 23.07.2007, 21:00
by Don.Hasi
Is it possible to go in with a delivery to germany? If so and the colour of the badge is free (something in the kind of grey) I´m interested
Thanks in advance for the organisation.
Regards