If people are interested, I am sure that Dave and I can help out.
Here are some pictures of progress:
| Home | WikiLEC | Repairs | Upgrades | Gallery | Buy & Sell | Mountain Chips | Meets & Events | Contact |
|
Bling, courtesy of Geordie enterprises
Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
Bling, courtesy of Geordie enterprises
by GeoffSmith » Sat 16.02.2008, 15:02
Seeing as I've been off work for some time and the car has been sat in the garage waiting for turbo re-instatement after porting the wastegate, I've had some time to do some low level brain cell activity and identify fasteners that could benefit from going stainless. I've obviously been talking with Whitley Bay's own stainless guru. They're not for appearance I hasten to add, but to combat the effects of the great British weather but they do look good. If people are interested, I am sure that Dave and I can help out.
Here are some pictures of progress:
If people are interested, I am sure that Dave and I can help out.
Here are some pictures of progress:
- Attachments
-
CAScover1s.jpg- CAS cover
- (66.49 KiB) Downloaded 99 times
-
- Peco rear hanger
- PecoRearHanger1s.jpg (29.01 KiB) Viewed 14139 times
-
- Cam cover centre cover
- CamCoverCentreCover1s.jpg (43.44 KiB) Viewed 14138 times
-
- WastegateStuds1s.jpg
- Wastegate stud set
- (66.71 KiB) Downloaded 92 times
Last edited by GeoffSmith on Sun 17.02.2008, 22:50, edited 1 time in total.
-
GeoffSmith - Kitty Fiddler
- Posts: 15628
- Joined: Fri 03.02.2006, 21:57
- Location: S2#417 in Tytherington, Gloucestershire
by paza1 » Sat 16.02.2008, 15:39
Geoff,
I would be interested in the spark plug cover screws and the CAS cover bolt. Would be able to pick up at Donington. Incidentally, I have a few stainless M6 x12 Hex Head bolts (proportioning valve fitting to chassis, quite exposed to the elements) spare, if anyones interested.
Cheers
Mark
I would be interested in the spark plug cover screws and the CAS cover bolt. Would be able to pick up at Donington. Incidentally, I have a few stainless M6 x12 Hex Head bolts (proportioning valve fitting to chassis, quite exposed to the elements) spare, if anyones interested.
Cheers
Mark
Silver 1992 SE Turbo.
- paza1
- Fanatic
- Posts: 687
- Joined: Thu 09.06.2005, 22:46
- Location: Chester
by Paul.P » Sat 16.02.2008, 17:35
Geoff, i'm interested in any stainless replacements you do mate, please let me know if you need any money ?
Thanks, Paul
Thanks, Paul
JPS M100 was built from bare chassis up to create one off M100 in the mould of JPS Team Lotus
- Paul.P
- God
- Posts: 4970
- Joined: Sun 14.12.2003, 18:18
- Location: Oakham, Rutland
by GeoffSmith » Sat 16.02.2008, 18:41
More pics...
- Attachments
-
- CAScover2s.jpg
- (48.79 KiB) Downloaded 47 times
-
- CamCoverCentreCover3s.jpg (47.17 KiB) Viewed 14134 times
-
- CamCoverCentreCover2s.jpg (49.81 KiB) Viewed 14133 times
-
- WastegateStuds3s.jpg
- (71.37 KiB) Downloaded 52 times
-
- WastegateStuds2s.jpg
- (59.08 KiB) Downloaded 46 times
-
GeoffSmith - Kitty Fiddler
- Posts: 15628
- Joined: Fri 03.02.2006, 21:57
- Location: S2#417 in Tytherington, Gloucestershire
by dapinky » Sat 16.02.2008, 18:55
Let's get ailwyns' list bigger then 
1. Paza1
2. Paul.P
3. Ailwyn
4. Ailwyn
5. Pinky
1. Paza1
2. Paul.P
3. Ailwyn
4. Ailwyn
5. Pinky
Dave
Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it
...oh, and a 2006 Freelander destined for the jungles of The Gambia - 4500 miles across roads, desert and tracks - what could possibly go wrong?
Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it
...oh, and a 2006 Freelander destined for the jungles of The Gambia - 4500 miles across roads, desert and tracks - what could possibly go wrong?
-
dapinky - LEC Administrator
- Posts: 10625
- Joined: Sun 15.10.2006, 12:54
- Location: As far west as you can get in West Wales before you become Irish (Pembroke Dock).
by Paul.P » Sat 16.02.2008, 18:57
Geoff, i don't require the camcover ones, as ive already sorted them, but if its messing you about, then put em in !
- Attachments
-
- camcover.JPG (84.38 KiB) Viewed 14143 times
JPS M100 was built from bare chassis up to create one off M100 in the mould of JPS Team Lotus
- Paul.P
- God
- Posts: 4970
- Joined: Sun 14.12.2003, 18:18
- Location: Oakham, Rutland
by GeoffSmith » Sat 16.02.2008, 18:59
dapinky wrote:Let's get ailwyns' list bigger then
1. Paza1
2. Paul.P
3. Ailwyn
4. Ailwyn
5. Pinky
This is a project thread ya basts!
Calypso Red S2 #417
USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
-
GeoffSmith - Kitty Fiddler
- Posts: 15628
- Joined: Fri 03.02.2006, 21:57
- Location: S2#417 in Tytherington, Gloucestershire
by Paul.P » Sat 16.02.2008, 19:24
geoffsmith wrote:dapinky wrote:Let's get ailwyns' list bigger then
1. Paza1
2. Paul.P
3. Ailwyn
4. Ailwyn
5. Pinky
This is a project thread ya basts!
Seeing as your off work, with nowt better to do
, you are a nice man Geoff 
JPS M100 was built from bare chassis up to create one off M100 in the mould of JPS Team Lotus
- Paul.P
- God
- Posts: 4970
- Joined: Sun 14.12.2003, 18:18
- Location: Oakham, Rutland
by GeoffSmith » Sat 16.02.2008, 20:41
Paul.P wrote:but if its messing you about, then put em in !
You can have what you want!
Calypso Red S2 #417
USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
-
GeoffSmith - Kitty Fiddler
- Posts: 15628
- Joined: Fri 03.02.2006, 21:57
- Location: S2#417 in Tytherington, Gloucestershire
by GeoffSmith » Sat 16.02.2008, 22:33
CAS cover. 
- Attachments
-
- CAScover-320.jpg (18.15 KiB) Viewed 14157 times
-
GeoffSmith - Kitty Fiddler
- Posts: 15628
- Joined: Fri 03.02.2006, 21:57
- Location: S2#417 in Tytherington, Gloucestershire
by GeoffSmith » Sun 17.02.2008, 20:56
My Peco has been on less than 2 years and the rear hanger bolt was a bit on the tight side - not any more!
- Attachments
-
- PecoRearHanger2-400.jpg (33.84 KiB) Viewed 14133 times
-
GeoffSmith - Kitty Fiddler
- Posts: 15628
- Joined: Fri 03.02.2006, 21:57
- Location: S2#417 in Tytherington, Gloucestershire
by surfboardfiller » Sun 17.02.2008, 21:22
1. Paza1
2. Paul.P
3. Ailwyn
4. Ailwyn
5. Pinky
6. Surferphil (what ever you get )
7. Surferphil
2. Paul.P
3. Ailwyn
4. Ailwyn
5. Pinky
6. Surferphil (what ever you get
)
7. Surferphil
-
surfboardfiller - God
- Posts: 2857
- Joined: Sat 22.10.2005, 14:08
- Location: Somerset - England
by theelanman » Sun 17.02.2008, 21:41
1. Paza1
2. Paul.P
3. Ailwyn
4. Ailwyn
5. Pinky
6. Surferphil (what ever you get )
7. Surferphil
8. theelanman
2. Paul.P
3. Ailwyn
4. Ailwyn
5. Pinky
6. Surferphil (what ever you get )
7. Surferphil
8. theelanman
I’m normally not a praying man, but if you’re up there, please save me, Superman.
-
theelanman - Moderator
- Posts: 7296
- Joined: Fri 30.04.2004, 15:52
- Location: peak district
by GeoffSmith » Sun 17.02.2008, 22:38
Bloody West Country mafia, my project's been hijacked 
Last edited by GeoffSmith on Sun 17.02.2008, 22:44, edited 1 time in total.
Calypso Red S2 #417
USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
-
GeoffSmith - Kitty Fiddler
- Posts: 15628
- Joined: Fri 03.02.2006, 21:57
- Location: S2#417 in Tytherington, Gloucestershire
by Specky » Sun 17.02.2008, 22:41
geoffsmith wrote:CAS cover.
Pre mod... so yesterday..
TTFN
- Attachments
-
- cascover-320_139.jpg (18.15 KiB) Viewed 14144 times
If you have a problem, if no one else can help, and if you can find them, maybe you can hire... The N/A-Team.
-
Specky - Moderator
- Posts: 5982
- Joined: Sun 07.09.2003, 23:19
- Location: Swindon
Who is online
Users browsing this forum: No registered users and 18 guests