Hi!
My Elan have not a remote control central lock.I can build the transmitter and the receiver,but i don't' know when i connect the receiver.Anyone can help me? Thank you!
| Home | WikiLEC | Repairs | Upgrades | Gallery | Buy & Sell | Mountain Chips | Meets & Events | Contact |
|
Central Lock
Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
5 posts
• Page 1 of 1
Central Lock
by Marc333 » Mon 30.07.2007, 12:39
- Marc333
- Newbie
- Posts: 6
- Joined: Thu 14.06.2007, 12:30
by nitroman » Mon 30.07.2007, 14:32
Depends on whether you're in the USA or elsewhere. The CDL control unit is above the glovebox in USA models; not sure of the location on non-USA cars.
Strive for perfection in everything. (given time)
Take the best that exists & make it better. (given inclination)
If it doesn't exist, create it. (God did)
Ignore what I say. (good advice)
Take the best that exists & make it better. (given inclination)
If it doesn't exist, create it. (God did)
Ignore what I say. (good advice)
-
nitroman - Moderator
- Posts: 3554
- Joined: Fri 18.04.2003, 01:17
- Location: Jacksonville, FL
by evert » Tue 14.08.2007, 14:05
Marc,
it is not as simple as you might expect. I used the transmitter&receiver from my car alarm. The CDL unit uses two lines which have to be disconnected or one end switched to ground (as far as I remember) to make it work. If you want I can look up the schematics I used (about two years agoo).
it is not as simple as you might expect. I used the transmitter&receiver from my car alarm. The CDL unit uses two lines which have to be disconnected or one end switched to ground (as far as I remember) to make it work. If you want I can look up the schematics I used (about two years agoo).
-
evert - Newbie
- Posts: 23
- Joined: Tue 12.04.2005, 14:21
- Location: Netherlands
5 posts
• Page 1 of 1
Return to Projects - Other (Minor)
Who is online
Users browsing this forum: No registered users and 0 guests