Cam Belt service...N E England ?

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Cam Belt service...N E England ?

Postby Paul S4 » Fri 23.03.2012, 01:08

This is my first post on here...!
I am new to 'modern' Lotus cars, but very familiar with the 'classic' Elan !
As per title...I am considering getting a 1991 M100 SE; it will need a cam belt service. Does anyone know/recommend a specialist in the Co. Durham/Teeside/Newcastle area. Also what sort of cost will this be ? Is there anything else that should be done at the same time as the cambelt? Thanks in advance.
Paul S4
Newbie
 
Posts: 2
Joined: Sun 11.03.2012, 11:22

Re: Cam Belt service...N E England ?

Postby Rice crispy » Tue 27.03.2012, 09:02

Can't help with the garage but everyone seems to do all the belts, and water pump as well. I had mine done a couple of years ago and got bits from SJ's and a mechanic friend who looks after his own exotics charged me about £250 iirc to do it all along with CAS seal, and full service (most of the parts I got).
David
User avatar
Rice crispy
God
 
Posts: 1871
Joined: Tue 16.06.2009, 11:48
Location: brentwood essex

Re: Cam Belt service...N E England ?

Postby abmunro » Tue 27.03.2012, 12:41

We have Formula One at Newcastle ( Expensive )

There is also Colin @ REVLINE whitley Bay ( Reasonable )

Cheers

Tony
91 Elan SE 24k miles, 270 BHP @ 1.25 barg. Roll hoops + fairings+ speed humps Elise lights. S2 alloys. Nitrons& Eibachs,AP's front & Hi Spec rear brakes
User avatar
abmunro
God
 
Posts: 1726
Joined: Wed 18.04.2007, 22:46
Location: Chester-Le-Street, Co Durham.

Re: Cam Belt service...N E England ?

Postby Aoki Magic Pants » Tue 27.03.2012, 14:52

abmunro wrote:We have Formula One at Newcastle ( Expensive )

There is also Colin @ REVLINE whitley Bay ( Reasonable )

Cheers

Tony


Although I've never had to do my Cam Belt, I get my Elan MOT'd etc here at Hunters Autocare in Newburn:

http://www.autoinsider.co.uk/local/mot- ... _80915.php
Aoki Magic Pants
Enthusiast
 
Posts: 209
Joined: Mon 04.05.2009, 17:57
Location: Newcastle UK

Re: Cam Belt service...N E England ?

Postby Rambo » Wed 28.03.2012, 07:49

Colin at REVLINE, Whitley Bay has an M100 himself so is well versed in the Elan
User avatar
Rambo
Don't push me
 
Posts: 9144
Joined: Wed 24.12.2003, 00:37
Location: Both sides of the Tweed

Re: Cam Belt service...N E England ?

Postby Fourdoorcat » Fri 30.03.2012, 00:29

Since the work required to replace the timing belt is rather significant, a couple of other things to consider replacing besides the accessory belts, water pump and CAS O-ring are:

Crankshaft seal
Camshaft seals
Cam cover gasket
Spark Plugs (possibly wires, depending on age)
"Bung" O-ring

Ken
"Never ascribe to malice that which can be perfectly explained by stupidity"
User avatar
Fourdoorcat
Enthusiast
 
Posts: 131
Joined: Thu 07.10.2010, 05:08
Location: Rio Vista, California USA

Re: Cam Belt service...N E England ?

Postby Paul S4 » Fri 30.03.2012, 01:08

Many thanks for all those replies. But what is a CAS seal?
Paul S4
Newbie
 
Posts: 2
Joined: Sun 11.03.2012, 11:22

Re: Cam Belt service...N E England ?

Postby tigerdog » Fri 30.03.2012, 05:30

Paul S4 wrote:Many thanks for all those replies. But what is a CAS seal?

It's the o-ring that keeps oil from seeping out from behind the Cam Angle Sensor (round black thingie where the distributor should be at the right-front of the engine.) Clicky for replacements of a better material than stock.
"Refitting is the reverse sequence to removal, but you swear in different places."
User avatar
tigerdog
God
 
Posts: 2712
Joined: Tue 20.03.2007, 09:07
Location: San Diego, CA, USA

Re: Cam Belt service...N E England ?

Postby Aoki Magic Pants » Tue 03.04.2012, 14:59

Paul S4 wrote:Many thanks for all those replies. But what is a CAS seal?



Just out of interest; where do you live Paul?
Aoki Magic Pants
Enthusiast
 
Posts: 209
Joined: Mon 04.05.2009, 17:57
Location: Newcastle UK


Return to Engine

Who is online

Users browsing this forum: No registered users and 4 guests