Ignition Switch Replacement

Leads, coils, plugs, starters, starting probs etc.

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Re: Ignition Switch Replacement

Postby Brit-Car-Nut » Thu 11.06.2020, 17:38

Remember, the switch was used in other US and Canadian cars, so the switch will fit ALL of the versions.

You just need to figure out where the wires go and solder flag type female connectors, use a bit of heat-shrink and you have a cheap solution.

If someone wants to send me a harnessed version with a bad switch, I will be happy to make the mods and send it back.

I will also be happy to identify what each post on the switch does
Please contact me via eMail, not by PM
Brit-Car-Nut
God
 
Posts: 4820
Joined: Tue 03.07.2007, 17:07
Location: Charlotte, NC USA

Re: Ignition Switch Replacement

Postby Saltire » Thu 11.06.2020, 19:29

dapinky wrote:I did however remember a simple fact from the 1990's - all self-respecting ram-raiding car thieves carried a 'Vauxhall black box' in their pocket {the actual switch bit we are all talking about} - they were all sufficiently interchangable to be able to hot-wire any car that they had snapped the ignition barrel off of with their 12" scaffold tube!

Bit old hat that, Dave; they’ve all upgraded now. I hear tell there are rolling code capture apps which work on Android phones. TWOC for Dummies.
Jonathan

1995 Elan S2, BRG - Now sadly sold
Mrs Saltire’s 2021 Mini Countryman Cooper S
Mrs Saltire’s 2022 BMW i3S
User avatar
Saltire
God
 
Posts: 2457
Joined: Sun 05.04.2015, 22:27
Location: Left foot in Wiltshire, right foot in Gloucestershire, heart in Scotland

Re: Ignition Switch Replacement

Postby dapinky » Thu 11.06.2020, 20:41

True - but then I was specifically referring to the ram-raiders...... not the proper thieves.

Ram-raiders lost interest with the new generation of Cavaliers which had imobilisers (ie, nowt newer than an M reg) - they had a habit of getting caught when sitting in a car that wouldn't start :lol:
Dave

Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it


...oh, and a 2006 Freelander destined for the jungles of The Gambia - 4500 miles across roads, desert and tracks - what could possibly go wrong?
User avatar
dapinky
LEC Administrator
 
Posts: 10605
Joined: Sun 15.10.2006, 12:54
Location: As far west as you can get in West Wales before you become Irish (Pembroke Dock).

Re: Ignition Switch Replacement

Postby GeoffSmith » Thu 11.06.2020, 22:27

If you can sort it mechanically, there are 3 connections you need to make (see DIN 72552 for the switch connections which are probably marked on your defective switch):

Live feed to #30: Brown wire to ignition switch connector pin 2 comes out as red in the pigtail.
Switched ignition to #15: White wire to ignition switch connector pin 3 comes out as black in the pigtail.
Starter relay to #50: White/red wire to ignition switch connector pin 1 comes out as black/red in the pigtail.

There may be an extra red wire connected to the ignition switch connector pin 4 which does not appear to be used but the reference number on the switch and DIN 72552 should allow you to determine its function and whether to connect it or not.

https://en.wikipedia.org/wiki/DIN_72552

http://www.dimebank.com/LucasColours.html

http://wikilec.com/images/7/79/MJ25-02_ ... nition.gif
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire

Previous

Return to Ignition and fuelling

Who is online

Users browsing this forum: No registered users and 8 guests