Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
by cider_fox » Tue 10.11.2026, 15:52
Hey all. My S2 has quite a few areas where there's very light scratches in the paintwork. Any tips on how to deal with it? I've no idea if it's special paint that needs to be treated differently to non-fibreglass cars. Or whether machine polishing is risky and hand polishing is better, or what type of polishing compounds are good. Any thoughts? Ta
-
cider_fox
- Newbie
-
- Posts: 14
- Joined: Thu 10.08.2023, 21:49
by mcdonaa2804 » Wed 11.11.2026, 08:46
I've found with my S2, the paintwork has responded very well to machine polishing. It was very scratched on most panels, which I believe all to be original paint (Calypso red too...it was garaged for most of its life).
I used a DA machine with a 2 in one polish called Menzerna:
https://amzn.eu/d/0cM6djPfI've also read that the original Lotus paint it pretty resilient and thick.
-
mcdonaa2804
- Welcome to LEC - please introduce yourself
-
- Posts: 1
- Joined: Wed 31.03.2021, 13:32
by Tuga2112 » Wed 11.11.2026, 11:05
Trevor's your guy

-

Tuga2112
- God
-
- Posts: 3084
- Joined: Fri 12.09.2014, 22:54
- Location: Durham with a regular trip to Walsall
by cider_fox » Sun 15.11.2026, 17:00
Thanks both! Much appreciated
-
cider_fox
- Newbie
-
- Posts: 14
- Joined: Thu 10.08.2023, 21:49
by TrevorB » Mon 16.11.2026, 16:33
Tuga2112 wrote:Trevor's your guy

I also use Menzerna.
They do different grades depending on what you want to remove.
I also use a polisher for the work with different pads again depending on what you need to do.
Of course there are plenty of other products out there.
Trevor

Silk Red SE Turbo
Short shift conversion with BB aluminium cables
HiSpec front brakes
PNM rear brakes
Piper Exhaust
Aluminium radiator
Closed Loop conversion
Kilimanjaro chip
-

TrevorB
- Wannabe Princess
-
- Posts: 884
- Joined: Sun 23.01.2011, 21:18
- Location: Gravesend, Kent
Return to Hood/Top, Bodywork and Fittings
Who is online
Users browsing this forum: No registered users and 2 guests