i need to replace my thermostat and the local motor factors all say they have`nt a listed part number for the m100.
does anyone have a alternative part number for one .
cheers
| Home | WikiLEC | Repairs | Upgrades | Gallery | Buy & Sell | Mountain Chips | Meets & Events | Contact |
|
thermostat part number
Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
13 posts
• Page 1 of 1
thermostat part number
by brian s » Sat 11.08.2012, 15:29
- brian s
- Tinkerer
- Posts: 70
- Joined: Mon 04.01.2010, 23:03
- Location: Newport, south wales
Re: thermostat part number
by HJ2 » Sat 11.08.2012, 15:45
Check the wiki! 
If you always do what you always did, you always get what you always got
-
HJ2 - Wodan - God of the Low Lands
- Posts: 4405
- Joined: Fri 06.06.2008, 10:54
- Location: Delft, the Netherlands
Re: thermostat part number
by JohnB » Sat 11.08.2012, 16:44
I bought one from JCT600 Lotus agent and the part number on the invoice was:-
LA100E6176S Thermostat.
LA100E6355S Gasket.
LA100E6176S Thermostat.
LA100E6355S Gasket.
Anybody going slower than me is an idiot. Anybody going faster is a maniac.
-
JohnB - Enthusiast
- Posts: 195
- Joined: Tue 05.10.2010, 16:51
- Location: Leeds. West Yorkshire.
Re: thermostat part number
by Brit-Car-Nut » Sat 11.08.2012, 16:47
Same thermostat as the Isuzu Impulse Turbo. 185 degree is standard.
Please contact me via eMail, not by PM
- Brit-Car-Nut
- God
- Posts: 4820
- Joined: Tue 03.07.2007, 17:07
- Location: Charlotte, NC USA
Re: thermostat part number
by cliff » Sat 11.08.2012, 17:37
91 Lotus Elan SE Turbo
03 MG TF 135 Sprint (Partner's)
07 Alfa Spider 939
If you can't be a good example, then you might as well be a terrible warning
03 MG TF 135 Sprint (Partner's)
07 Alfa Spider 939
If you can't be a good example, then you might as well be a terrible warning
-
cliff - God
- Posts: 801
- Joined: Mon 17.01.2011, 18:39
- Location: Preveza Greece / Scunthorpe UK
Re: thermostat part number
by GeoffSmith » Sat 11.08.2012, 19:05
Calypso Red S2 #417
USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
-
GeoffSmith - Kitty Fiddler
- Posts: 15628
- Joined: Fri 03.02.2006, 21:57
- Location: S2#417 in Tytherington, Gloucestershire
Re: thermostat part number
by dapinky » Sat 11.08.2012, 20:13
But to save you a few seconds of time, tell your local dealer you drive a 1985 mini clubman!
Dave
Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it
...oh, and a 2006 Freelander destined for the jungles of The Gambia - 4500 miles across roads, desert and tracks - what could possibly go wrong?
Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it
...oh, and a 2006 Freelander destined for the jungles of The Gambia - 4500 miles across roads, desert and tracks - what could possibly go wrong?
-
dapinky - LEC Administrator
- Posts: 10605
- Joined: Sun 15.10.2006, 12:54
- Location: As far west as you can get in West Wales before you become Irish (Pembroke Dock).
Re: thermostat part number
by brian s » Sat 11.08.2012, 23:03
have found 3 that would seem ok, halfords HTK600, quinton hazel QTH102, and VERNET 209770300 which opens at 82deg as opposed to the other two which open at 88deg.
has anyone tried a vernet one?.
has anyone tried a vernet one?.
- brian s
- Tinkerer
- Posts: 70
- Joined: Mon 04.01.2010, 23:03
- Location: Newport, south wales
Re: thermostat part number
by Brit-Car-Nut » Sun 12.08.2012, 00:56
The correct temp is 88deg. The fuel injection system needs a minimum temp to know it doesn't need to add mixture as a choke. 82 is too cold and you will stay rich longer than necessary.
Please contact me via eMail, not by PM
- Brit-Car-Nut
- God
- Posts: 4820
- Joined: Tue 03.07.2007, 17:07
- Location: Charlotte, NC USA
Re: thermostat part number
by Peter_W » Sun 12.08.2012, 12:54
When I replaced my thermostat last month the references I found for the O.E. thermostat, including the LEC Repair Section, was 180F/82C
"Those who know don't have the words to tell
And the ones with the words don't know too well"
And the ones with the words don't know too well"
-
Peter_W - Fanatic
- Posts: 440
- Joined: Sun 27.04.2003, 00:19
- Location: USA
Re: thermostat part number
by Brit-Car-Nut » Sun 12.08.2012, 13:56
Sorry, I keep thinking 88deg is 180. I never was able to remember. You are right, 180 is the correct temp - most unlike US cars that require 195 thermostats for fuel injection systems. Sorry, I didn't mean to confuse an yone.
Please contact me via eMail, not by PM
- Brit-Car-Nut
- God
- Posts: 4820
- Joined: Tue 03.07.2007, 17:07
- Location: Charlotte, NC USA
Re: thermostat part number
by nicowalker1 » Wed 15.08.2012, 15:40
dapinky wrote:But to save you a few seconds of time, tell your local dealer you drive a 1985 mini clubman!
they do fit and work, BUT they dont have the bleed at the top also mine only lasted 2000 miles is, fitted a lotus one and I've doe 5kish and its still ok? Maybe just bad luck. I did find the lotus gasket absolutly useless and couldne get it to seal.
-
nicowalker1 - God
- Posts: 1017
- Joined: Sat 18.04.2009, 13:44
- Location: Sowerby Bridge
Re: thermostat part number
by rip » Thu 16.08.2012, 22:50
nicowalker1 wrote:I did find the lotus gasket absolutly useless and couldne get it to seal.
Me too. A smearing of silicone sealant did the trick for me.
1990 SE
-
rip - God
- Posts: 5904
- Joined: Sun 08.04.2007, 07:48
- Location: Milton Keynes, UK
13 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 5 guests