Peco overboost prob solved!

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Postby John_W » Fri 25.05.2007, 21:46

Jay,
Glad you got it fixed.

But that's a wierd one. If the BCV was disabled in any way (like not being connected through duff wiring), that should lead to being unable to achieve any boost beyond 0.53 bar, not overboost.

The BCV is an automatic boost control valve, controlled by the ECU. Thus just as an MBC set to zero would give you no extra boost over base level (0.53), if the BCV (which acts like an intelligent MBC) was disconnected it would also give no extra boost.

John :?
User avatar
John_W
Heid-bummer
 
Posts: 3780
Joined: Mon 21.04.2003, 12:31
Location: Aberdeen

Postby Doug » Fri 25.05.2007, 22:16

agree with John,

be sure to check sustained WOT in 4th or 5th gear to be sure you have sustained full boost for some time --this is where the overboost should show up if there!


could it be that the tiny bit of boost bled away by the properly functioning BSV is enough to stop your overboost then!! :smt102
Image
User avatar
Doug
LEC Founder
 
Posts: 7468
Joined: Thu 17.04.2003, 06:43
Location: Oregon Coast, USA

Postby Sy V » Sat 26.05.2007, 17:25

Rev Limiter! :roll:
Image

Talk and song from tongues of lilting grace, sounds caress my ears but not a word I heard could I relay, the story was quite clear - Robert Plant

In Respectful Memory - 21st March 1959 - 14th February 2016
User avatar
Sy V
LEC Godfather
 
Posts: 5794
Joined: Mon 21.04.2003, 07:06
Location: Lydiate Ash, Bromsgrove, Worcestershire.

Postby ailwyn » Sun 27.05.2007, 10:34

jay_thomas wrote:Hard wide open throttle ends with the rev limiter cutting in and quite sweaty palms !! :D :D :D


Driving - Lesson 2 - When to change gear :-D

This could certainly explain why some people get overboost with the peco and not others....

Has anyone else tried this to cure the overboost? Would be nice to prove or disprove the theory.
ailwyn
Forum Member
 
Posts: 3361
Joined: Tue 09.08.2005, 20:45

Postby Dovey » Mon 04.06.2007, 17:57

Here's a thing...

My elan is peco'd with a kili. Overboost is not a problem, she boosts sweet at 0.8 bar - in the summer. I took her to Donny this year though when it was still freezing, and she overboosted. Not really a problem for me as I generally only drive her in summer but maybe the good weather drivers are the ones with less problems?
Never buy anything that was built on a Friday
User avatar
Dovey
Enthusiast
 
Posts: 190
Joined: Mon 11.07.2005, 12:26
Location: Lincoln

Postby ailwyn » Mon 04.06.2007, 20:59

Dovey wrote:maybe the good weather drivers are the ones with less problems?


That rules me out, on the day the good weather comes round she's usually off the road with something or other :roll:

A.
ailwyn
Forum Member
 
Posts: 3361
Joined: Tue 09.08.2005, 20:45

Postby ESM » Fri 08.06.2007, 19:33

hhmmmm, since the BCFV can only increase boost this seems an unlikely fix....

I suppose if the terminals were making intermittent contact (but were usually disconnected) then the duty cycle will work it way all the way up to 80% and when a circuit was eventually made you'd get instant overboost. This presupposes the boost is below target much of the time and if you get boost creep that's unlikely unless you've a chip.
It takes 43 muscles to frown and 17 to smile, but it doesn't take any to sit on your arse with a blank look on your face.

Click on my WWW link for information on chips and ElanScan.
User avatar
ESM
God
 
Posts: 2441
Joined: Thu 17.04.2003, 10:08

Postby John_W » Mon 11.06.2007, 19:23

jay_thomas wrote:explanation #2 : Elan Fairys messing about again!!.. :lol:

Yup, should have gone for that one straight off.
:-D
User avatar
John_W
Heid-bummer
 
Posts: 3780
Joined: Mon 21.04.2003, 12:31
Location: Aberdeen


Return to Turbos, Boost, and Intakes

Who is online

Users browsing this forum: No registered users and 3 guests