3D Printable Wire Bending Jig for fuel injector clips

[SomeoneTakeTheWheel]

In replacing my fuel injectors, I didn't like the condition of some of the little wire clips that lock the electrical connector on. I decided to make my own, but they are a very specific shape. So I designed a jig that would let you bend and trim 0.9mm spring steel wire into the exact shape needed.

I recommend printing in PETG or ABS or stronger. I printed in PLA and the strength of the steel wore that jig out after 2 uses.

https://www.thingiverse.com/thing:7421531