Is there an easy way to remove the ashtray back? I can't see how to prise it out. Do I really have to take the dashboard out?!
I'm interested in fitting a GPS unit, with a surround so that the ashtray goes completely, but I have the touchscreen GPS in its place. I plan to cut an aluminium section out and attach the GPS unit to it to make it all tidy.
| Home | WikiLEC | Repairs | Upgrades | Gallery | Buy & Sell | Mountain Chips | Meets & Events | Contact |
|
Removing Ashtray
Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
11 posts
• Page 1 of 1
astray
by johnbenk » Sat 06.05.2006, 18:36
Hi
The surround is sometimes "glued in". You could try a Hot air gun to see
it will melt the glue. mind you dont melt the surround. Better try a " hairdryer" first.
The surround is sometimes "glued in". You could try a Hot air gun to see
it will melt the glue. mind you dont melt the surround. Better try a " hairdryer" first.
Last edited by johnbenk on Sat 13.05.2006, 13:53, edited 1 time in total.
-
johnbenk - The only Gay in the Village
- Posts: 248
- Joined: Wed 21.09.2005, 20:46
surround
by johnbenk » Sat 06.05.2006, 21:29
Hi
On some car the surround would pull out with the ashtray. Previous owner may have glued the surround. Do not think it is metal though the part can be purchased as a seperate item part number a100V6015F.
On some car the surround would pull out with the ashtray. Previous owner may have glued the surround. Do not think it is metal though the part can be purchased as a seperate item part number a100V6015F.
Last edited by johnbenk on Sat 06.05.2006, 21:35, edited 2 times in total.
-
johnbenk - The only Gay in the Village
- Posts: 248
- Joined: Wed 21.09.2005, 20:46
by theelanman » Sat 06.05.2006, 21:38
erm...where did that pic come from??....just asking as I didnt know that the layout of the LHD cars changed from the RHD cars...either that of its just and 'inicative' sketch.....
my layout has swithches and ashtray located differently!!!
cheers
g
my layout has swithches and ashtray located differently!!!
cheers
g
I’m normally not a praying man, but if you’re up there, please save me, Superman.
-
theelanman - Moderator
- Posts: 7296
- Joined: Fri 30.04.2004, 15:52
- Location: peak district
by JonRB » Wed 19.09.2007, 18:37
Just for future reference for anyone searching for the answer in the future, the back of the ash tray is indeed held in with glue and a hairdryer does melt the glue and allow you to take it out.
-
JonRB - Newbie
- Posts: 16
- Joined: Fri 12.05.2006, 11:28
- Location: Thames Valley
ashtray
by John Tsakas » Mon 24.09.2007, 14:09
Hi
Yes you must put all the dash panel out. I know because
i just buy a new dash panel and is fix with the ashtray
Yes you must put all the dash panel out. I know because
i just buy a new dash panel and is fix with the ashtray
-
John Tsakas - Tinkerer
- Posts: 64
- Joined: Thu 29.09.2005, 06:19
- Location: Greece
Re: ashtray
by JonRB » Mon 24.09.2007, 18:14
John Tsakas wrote:Yes you must put all the dash panel out. I know because i just buy a new dash panel and is fix with the ashtray
Ok, but as I said in my previous post, mine was glued in and came out with the use of a hairdryer to melt the glue.
-
JonRB - Newbie
- Posts: 16
- Joined: Fri 12.05.2006, 11:28
- Location: Thames Valley
11 posts
• Page 1 of 1
Who is online
Users browsing this forum: AhrefsBot and 2 guests