Wiper Blades

Please put all your known Elan Cross-Refenced parts here--click "start new topic" and title it with the part type, then add all known info to the post.

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Re: Wiper Blades

Postby tigerdog » Sun 12.10.2008, 17:27

algirdas wrote:Looks like tomorrow may be a final drive for a while. I hope I can get it in before the snow from Salt Lake hits. Goodyear Eagle GS-D3s are downright dangerous in snow. Great in the wet. Horrible in the snow.Algirdas

Algirdas, please be aware you have a new Elan-owning "neighbor" somewhere in the Front Range. Randy purchased a yellow Elan from San Diego and drove it back to Denver from San Diego in one non-stop trip! Maybe you'll have someone to go driving with.
"Refitting is the reverse sequence to removal, but you swear in different places."
User avatar
tigerdog
God
 
Posts: 2712
Joined: Tue 20.03.2007, 09:07
Location: San Diego, CA, USA

Re: Wiper Blades

Postby algirdas » Sat 25.10.2008, 04:36

Dear Tigerdog:

I hope to meet him at LOCO's meeting Tuesday night. God willing, I will be able to drive the old girl to one more club meeting this year and not have to deal with an early fall snow.

Sincerely,

Algirdas
Noli illegitemi carborundum.
User avatar
algirdas
Moderator
 
Posts: 1093
Joined: Mon 19.01.2004, 03:20
Location: Fort Collins, Colorado

Re: Wiper Blades

Postby Doc Fizzix » Sat 25.10.2008, 05:22

tigerdog wrote:[Randy purchased a yellow Elan from San Diego and drove it back to Denver from San Diego in one non-stop trip! Maybe you'll have someone to go driving with.


Just make sure he changes the fluids and the timing belt, 17 years of sitting :chair:

Just making sure you got the yellow beauty taken care of :poke:
Saving the world with science!
User avatar
Doc Fizzix
God
 
Posts: 2281
Joined: Thu 23.09.2004, 23:36
Location: Deep in the heart of Texas

Re: Wiper Blades

Postby lotos » Thu 06.11.2008, 23:39

I'm going to order a set of icons online (half the price of the stores) - they come in "A" and "B" versions for both sizes. Apparently one is curved, the other not so much. What did you guys go with for your 24/22 Icon setup?
User avatar
lotos
God
 
Posts: 1689
Joined: Thu 26.08.2004, 04:48
Location: USA

Re: Wiper Blades

Postby tigerdog » Fri 07.11.2008, 16:29

Hi Randy!
Friendly local autoparts store only had one kind, so that's what I bought. I checked but could not find a part number on the blade and I've discarded the packaging. The 22" blade has about a 4" bow if you lift it off the windshield, draw a line between the ends and measure from the blade center to the line. It conforms nicely all the way to the side of the windshield - I would assume this is the curved version of the blade. I hope this helps
Doug
"Refitting is the reverse sequence to removal, but you swear in different places."
User avatar
tigerdog
God
 
Posts: 2712
Joined: Tue 20.03.2007, 09:07
Location: San Diego, CA, USA

Re: Wiper Blades

Postby algirdas » Fri 07.11.2008, 18:06

Dear Randy:

Both of mine bow. I didn't know that the Icon blades came in "A" and "B" versions. Learn something new each day.

Sincerely,

Algirdas
Noli illegitemi carborundum.
User avatar
algirdas
Moderator
 
Posts: 1093
Joined: Mon 19.01.2004, 03:20
Location: Fort Collins, Colorado

Re: Wiper Blades

Postby Coupeboy » Thu 15.10.2009, 13:08

For UK guys at least - Bosch 24/22 wipers are available cheaply from e-bay (I bought the 'Vauxhall Zafaria' ones for £11.50 delivered) the universal clips are tight but perserve and they go on a treat.
1992 Elan Pacific Blue SE
2007 325se Coupe
User avatar
Coupeboy
Enthusiast
 
Posts: 154
Joined: Thu 21.02.2008, 13:55
Location: Garstang, Lancashire, UK

Re: Wiper Blades

Postby wayne » Mon 15.08.2011, 03:51

Seeing as my cars yearly inspection is due this month and one of the wiper blades had a 1" split in it I decided to replace them. I refitted the same aftermarket "retro fit" blades that had been put on the car when I bought it but am not really happy with them. They just don't look right

Had alot of humidity on the screen when leaving work this morning and realised that they do not curve enough to wipe the screen properly.

I seem to remember them being different sizes (or at least the ones I removed were)!

Have looked at the wiki and it quotes a 22" renault replacement which I have found here for about £7 each:

http://www.renaultukparts.co.uk/product ... 8671000036

I have a few questions

1. Is this just the rubbers and not the blade holder?

2. Are both wiper blades the same size? (ie 22")

3. MY car is LHD... are they the same wiper blade holders?

Any advice greatly appreciated

Thanks

wayne
1992 Pacific Blue, Top end performance Kit. K&N airfilter& HKS BOV. Everest. HiSpec fronts, SS hoses. 2010 Canyon red Evora.
http://www.elanm100.com
User avatar
wayne
God
 
Posts: 884
Joined: Fri 12.09.2003, 00:38
Location: Bahrain

Re: Wiper Blades

Postby RayD » Mon 15.08.2011, 18:44

2. Yes, they are both 22"

Ray
User avatar
RayD
Forum Member
 
Posts: 2142
Joined: Mon 20.03.2006, 19:45
Location: South Yorkshire

Re: Wiper Blades

Postby Elanlover » Mon 15.08.2011, 21:12

Actually, I believe they are supposed to be 23 inch wipers which seem to be hard to get. Many people have opted for one 22 and one is 24 inch wiper.
I do whatever my Rice Crispies tell me to do
User avatar
Elanlover
Moderator
 
Posts: 3513
Joined: Fri 05.08.2005, 19:11
Location: The Great White North

Re: Wiper Blades

Postby lotusflight » Tue 11.03.2025, 04:45

tigerdog wrote:
algirdas wrote:I was concerned about that when I put them on, but clearance on the driver's side for a 24 inch blade is no problem. On the passenger's side, I use a 22 inch blade. Algirdas

nitroman wrote:Ditto here. I have the ICON blades as well in 24/22. They work much better than even factory new wipers as the surface pressure is uniform across the width of the blade.



A 3rd positive review here. I second all of Nitroman's comments and agree with Algirdas' 24/22 fitment suggestion for Bosch Ikon wipers. They look a little clunky but they do the job exceedingly well. Here in the US, the Trico Neoform is similar to Bosch Ikon at a lower price. I have it on our Merc E320 - it is the only blade that has ever worked right in the single-blade, push-pull wiper arm. Trico Innovision blade offers the same technology but look slimmer since they don't have the aerofoil design.


Picked up the Trico Neoform set 24+22. Tha ks for the suggestion. https://www.tricoproducts.com/products/ ... co-neoform
User avatar
lotusflight
Newbie
 
Posts: 46
Joined: Tue 18.02.2025, 02:09
Location: Washington, DC, The Colonies

Re: Wiper Blades

Postby lotusflight » Thu 13.03.2025, 13:52

Progress.
You do not have the required permissions to view the files attached to this post.
User avatar
lotusflight
Newbie
 
Posts: 46
Joined: Tue 18.02.2025, 02:09
Location: Washington, DC, The Colonies

Re: Wiper Blades

Postby tigerdog » Thu 13.03.2025, 14:52

:cheers: well done!
"Refitting is the reverse sequence to removal, but you swear in different places."
User avatar
tigerdog
God
 
Posts: 2712
Joined: Tue 20.03.2007, 09:07
Location: San Diego, CA, USA

Previous

Return to Part Cross-Reference

Who is online

Users browsing this forum: No registered users and 4 guests