Hi guys. Long time no post!
Hubby was out driving today and has come back saying he can't select reverse (was fine yesterday!). Hes had a look, hoping it was going to be a clip, but says it isn't. Does this mean one/both the cables need replacing? All the other gears are fine. Any help would be very welcome.
Cheers,
Sarah
| Home | WikiLEC | Repairs | Upgrades | Gallery | Buy & Sell | Mountain Chips | Meets & Events | Contact |
|
Problem selecting Reverse
Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
3 posts
• Page 1 of 1
Problem selecting Reverse
by Elan1 » Fri 31.08.2007, 19:50
- Elan1
- Tinkerer
- Posts: 67
- Joined: Wed 02.06.2004, 17:10
by Paul.P » Fri 31.08.2007, 21:52
Hi Sarah, sounds like possible beginings of cable failure, what cables do you have ?. Is the linkage stiff, i had this & all it needed was plenty of WD40 spraying at the gearbox end !
JPS M100 was built from bare chassis up to create one off M100 in the mould of JPS Team Lotus
- Paul.P
- God
- Posts: 4970
- Joined: Sun 14.12.2003, 18:18
- Location: Oakham, Rutland
by Elan1 » Sat 01.09.2007, 12:17
Hiya Paul,
I have the original standard cables on. Everything was fine before Hubby drove it and then no reverse. I'll tell him to WD40 it, but I think its going to be a replace of cables, by the sounds of it.
We're trying to sell it (
), so I don't really want to bodge it up and sell it on to someone for it to go wrong on them.
I have the original standard cables on. Everything was fine before Hubby drove it and then no reverse. I'll tell him to WD40 it, but I think its going to be a replace of cables, by the sounds of it.
We're trying to sell it (
), so I don't really want to bodge it up and sell it on to someone for it to go wrong on them.- Elan1
- Tinkerer
- Posts: 67
- Joined: Wed 02.06.2004, 17:10
3 posts
• Page 1 of 1
Return to Transmission, and Clutch
Who is online
Users browsing this forum: No registered users and 4 guests