Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
by Avonvilla » Mon 25.04.2005, 20:21
Thanks Grahame so yours is more expensive and no pre cat eliminator, i think if you are comparing the same products this deal is good for se owners anyway, and i want to haggle more too if i can get a confirmed order.
-

Avonvilla
- Fanatic
-
- Posts: 424
- Joined: Tue 22.04.2003, 00:01
- Location: Staffordshire
by Monty » Mon 25.04.2005, 20:28
Steve, i`m still interested. Just trying to justify the price in my head LOL ::)<br>I wouldn`t think there would be a great difference in material price between 2 1/4 and 2 1/2. AS i`ve said John.w got his done for £350 2 1/4" fitted. so i was allowing £400 for the exhaust and say £100 to £150 for the elimantor but that would be fitted. <br>So when u think about it, is this guy saying his exhaust is worth say add on £100 for discount + £50 fitting = £630 + vat ???<br><br>Lets see if u can get vat free ;)<br><br>
-

Monty
- Chunder King!
-
- Posts: 7977
- Joined: Sun 11.01.2004, 22:32
- Location: Leeds
by Monty » Mon 25.04.2005, 20:33
Avonvilla wrote -<br>
Thanks Grahame so yours is more expensive and no pre cat eliminator, i think if you are comparing the same products this deal is good for se owners anyway, and i want to haggle more too if i can get a confirmed order.
<br>[smiley=werd.gif]<br><br>[quote author=grahame link=board=exhaust;num=1113504212;start=45#59 date=04/25/05 at 12:17:29]Scuse me for sticking my nose in but with all the talk of costs I thought I would tell all how much mine cost and therefore give you all another benchmark<br><br>2.5"<br>Pre cat left in place but hollowed out<br>New down pipe from pre cat<br>New flexi joint<br>Main cat swap pipe<br>2 new silencers<br>3.5" s/s tail pipe<br><br>£500 + vat<br><br>Hope this helps in your ponderings[/quote]<br><br>Don`t forget this is for an S2 and 2 silencers, 2 1/2" + fitting so that was a good deal.<br><br>Steve u`rs is costing £780 + vat which includes a discount. and i`m sure the replacing the precat won`t cost £280+ <br> ???<br><br>All the more confusing. <br><br>

-

Monty
- Chunder King!
-
- Posts: 7977
- Joined: Sun 11.01.2004, 22:32
- Location: Leeds
by Paul.P » Mon 25.04.2005, 20:46
Am i missing something here, why's Grahame got 2 silencers ?
JPS M100 was built from bare chassis up to create one off M100 in the mould of JPS Team Lotus
-
Paul.P
- God
-
- Posts: 4970
- Joined: Sun 14.12.2003, 18:18
- Location: Oakham, Rutland
-
by Monty » Mon 25.04.2005, 20:49
There was a few peeps on here who did the same to try and keep the noise down on the air coming out of the back. [smiley=constipated.gif]
-

Monty
- Chunder King!
-
- Posts: 7977
- Joined: Sun 11.01.2004, 22:32
- Location: Leeds
by Avonvilla » Mon 25.04.2005, 20:55
Monty still not with you mate ? where did john d get his done and what quality is it ? theres no doubt you can get cheaper if you change this or that but then if thats what you want then this exhaust isn't for you, this is a no compromise system with everything needed for the Elan.<br><br>As for Grahames system it is not the same at all, Grahame has no racing cat just a pipe to swap his original in and out, the racing cat is £260 plus vat alone ! and no pre cat eliminator so given your figures thats 500 + 150 + 260 + vat or am i missing something ?
-

Avonvilla
- Fanatic
-
- Posts: 424
- Joined: Tue 22.04.2003, 00:01
- Location: Staffordshire
by Avonvilla » Mon 25.04.2005, 20:56
Think 2 silencers is a personal thing becasue of noise, powerspeed say there will be very little rise in volume just deeper with there 1 rear silencer.
-

Avonvilla
- Fanatic
-
- Posts: 424
- Joined: Tue 22.04.2003, 00:01
- Location: Staffordshire
by Paul.P » Mon 25.04.2005, 21:16
Steve, lets just see what final price is, & if they will deal for cash, then we can all make our minds up, i appreciate what they are proposing to do & round about £500 for cash sounds a reasonable price.
JPS M100 was built from bare chassis up to create one off M100 in the mould of JPS Team Lotus
-
Paul.P
- God
-
- Posts: 4970
- Joined: Sun 14.12.2003, 18:18
- Location: Oakham, Rutland
-
by Monty » Mon 25.04.2005, 22:44
I did mean John. W LOL ::)<br><br>Steve,<br>didn`t realise that Grahmes didn`t come with a main-cat (would like to know how he connects his origanal to the 2 1/2" system thou ???). The exhaust u propose does sound like a good system. So i`m with Paul, lets see what the final price will be ;D<br><br>I know where making it a little difficult on u, just trying to save on pennys.<br>It`s just hard to get money from us northerners LOL, like blood from a stone :)
-

Monty
- Chunder King!
-
- Posts: 7977
- Joined: Sun 11.01.2004, 22:32
- Location: Leeds
by grahamec » Tue 26.04.2005, 01:10
Monty<br>My system is a straight through type, where it differs is in the area of the main cat, I run the car sans cats therefore trying to eliminate restrictions, I have had flanges made up attatched to my main cat so when I go for a MOT I slip the cat back into the system (removing the bypass pipe) and hopefully passing the emission test :-/
-

grahamec
- Fanatic
-
- Posts: 693
- Joined: Tue 30.03.2004, 12:22
- Location: Dumfriesshire
by Monty » Tue 26.04.2005, 16:07
Grahame,<br><br>So do u switch with u`r stock main cat or did u buy a stainless replacement ???
-

Monty
- Chunder King!
-
- Posts: 7977
- Joined: Sun 11.01.2004, 22:32
- Location: Leeds
by grahamec » Tue 26.04.2005, 17:17
Monty<br>With the stock main cat, since it won't be in the system long I didn't feel like shelling out the extra for s/s. The bypass pipe is in s/s though.<br><br>The two systems are different and both acceptable, I just chose a non cat jobby while Avonvilla is going down the road of a nice sports cat which will save the hassle of swapping.
-

grahamec
- Fanatic
-
- Posts: 693
- Joined: Tue 30.03.2004, 12:22
- Location: Dumfriesshire
by Paul.P » Thu 28.04.2005, 18:55
Out of interest, just had a reply back from Exhausts UK about replacing the pre-cat, they quoted £75 on top of the £295 to fit & replace the rest, although they did say they would need to see it before giving firm quote !
JPS M100 was built from bare chassis up to create one off M100 in the mould of JPS Team Lotus
-
Paul.P
- God
-
- Posts: 4970
- Joined: Sun 14.12.2003, 18:18
- Location: Oakham, Rutland
-
by Monty » Thu 28.04.2005, 19:01
Paul sounds to good to be true that :-/ if it is thats cheap just can`t see them doing the pre-cat replacement for £75 but even so if it cost £150 u`r talking £450 all in and fitted. Just wish i could find someone local ::)
-

Monty
- Chunder King!
-
- Posts: 7977
- Joined: Sun 11.01.2004, 22:32
- Location: Leeds
by Paul.P » Thu 28.04.2005, 19:07
Well Monty, lets see what Steve comes back with, i have relations that have had exhausts from Exhausts UK, & they reckon there really good, but lets be patient & way up all the options ?
JPS M100 was built from bare chassis up to create one off M100 in the mould of JPS Team Lotus
-
Paul.P
- God
-
- Posts: 4970
- Joined: Sun 14.12.2003, 18:18
- Location: Oakham, Rutland
-
by Avonvilla » Thu 28.04.2005, 23:24
Paul, how can they quote without seeing it ? they sound EXACTLY like Powerflow to me but if thats a true price for an identical quality system then i'll drive up there and get it done ! <br><br>I've been in contact again and this is what i got back today.<br><br>ME:-<br><br>Hi Dave<br> <br>Questions coming back to me are<br> <br>What is the gurantee ? and is it still valid just supplied and not fitted by you ?<br> <br>Any deal for cash ( the vat seems a sticking point )<br> <br>New amounts too, please advise on 3 x fitted systems as originally specced with cats and 5 x supply only no cat versions<br> <br>Thanks<br> <br>Steve<br><br>REPLY :-<br><br>Hi Steve<br> <br>guarantee is any problems we will sort it as long as its not down to misuse or proper maintenance<br> <br>sorry cannot talk about deals about cash online<br> <br>prices will not change much till i can actually make one and then time it but of course if i can i will <br> <br>Regards Dave
-

Avonvilla
- Fanatic
-
- Posts: 424
- Joined: Tue 22.04.2003, 00:01
- Location: Staffordshire
by Paul.P » Fri 29.04.2005, 17:53
Steve, not being rude m8, but why not ring him to talk about a possible cash deal, price of phone call could save quite a lot ?
JPS M100 was built from bare chassis up to create one off M100 in the mould of JPS Team Lotus
-
Paul.P
- God
-
- Posts: 4970
- Joined: Sun 14.12.2003, 18:18
- Location: Oakham, Rutland
-
by Avonvilla » Fri 29.04.2005, 19:38
Paul, give me some credit mate ! already done that ::) he is less than kean to start talking real numbers now till he fits a system, spose i can see his point but it clouds the group buy somewhat.
-

Avonvilla
- Fanatic
-
- Posts: 424
- Joined: Tue 22.04.2003, 00:01
- Location: Staffordshire
by Paul.P » Fri 29.04.2005, 20:13
Sorry Steve, so whats happening then, are you having your's fitted & then tell us what the damage will be ?
JPS M100 was built from bare chassis up to create one off M100 in the mould of JPS Team Lotus
-
Paul.P
- God
-
- Posts: 4970
- Joined: Sun 14.12.2003, 18:18
- Location: Oakham, Rutland
-
Return to Exhaust
Who is online
Users browsing this forum: No registered users and 4 guests