Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
by SKIN 1964 » Wed 06.06.2007, 21:23
IVE JUST JOINED THE FORUM AND AM THINKING OF PURCHASING MY FIRST ELAN THAT NEEDS ABIT OF TLC

,
ITS AN 89/90 NON -TURBO MODEL , SILVER IN COLOUR WITH GENERALLY GOOD BODYWORK AND 87K ON THE CLOCK . I PLAN TO RE-UPHOLSTER THE LEATHER SEATS AND DOOR PANELS, FIT NEW CARPETS,CLEAN ALL THE FACIA AND HAVE A NEW HOOD FITTED, AFTER ALL THE ABOVE IS DONE DOES ANYONE KNOW ROUGHLY WHAT ITS VALUE WOULD BE?
CHEERS

-
SKIN 1964
- Welcome to LEC - please introduce yourself
-
- Posts: 1
- Joined: Wed 06.06.2007, 20:33
- Location: STAINES
by Dave Eds » Wed 06.06.2007, 21:26
SKIN 1964 wrote:IVE JUST JOINED THE FORUM AND AM THINKING OF PURCHASING MY FIRST Elan THAT NEEDS ABIT OF TLC

,
ITS AN 89/90 NON -TURBO MODEL , SILVER IN COLOUR WITH GENERALLY GOOD BODYWORK AND 87K ON THE CLOCK . I PLAN TO RE-UPHOLSTER THE LEATHER SEATS AND DOOR PANELS, FIT NEW CARPETS,CLEAN ALL THE FACIA AND HAVE A NEW HOOD FITTED, AFTER ALL THE ABOVE IS DONE DOES ANYONE KNOW ROUGHLY WHAT ITS VALUE WOULD BE?
CHEERS

Cue WillB and Surferphil

-

Dave Eds
- Moderator
-
- Posts: 5137
- Joined: Thu 05.01.2006, 22:59
- Location: Wadesmill, Herts or Mickleton, Gloucs or somewhere else
by Paul.P » Wed 06.06.2007, 22:14
Would of thought being a non turbo, not much more than 5k, if that at the moment ?
JPS M100 was built from bare chassis up to create one off M100 in the mould of JPS Team Lotus
-
Paul.P
- God
-
- Posts: 4970
- Joined: Sun 14.12.2003, 18:18
- Location: Oakham, Rutland
-
by Sy V » Thu 07.06.2007, 08:15
Assuming that you're paying the correct price for the car, in the first place. Your efforts will add about 20% of their cost to its value.
Talk and song from tongues of lilting grace, sounds caress my ears but not a word I heard could I relay, the story was quite clear - Robert PlantIn Respectful Memory - 21st March 1959 - 14th February 2016
-

Sy V
- LEC Godfather
-
- Posts: 5794
- Joined: Mon 21.04.2003, 07:06
- Location: Lydiate Ash, Bromsgrove, Worcestershire.
by WillB » Thu 07.06.2007, 11:44
Make sure you check the underside for rot (especially the rear wishbones)
'project' N/A's go for anything from around £2k upwards with mint cars selling for around £5k
It all depends on what work is required.
Good luck

-

WillB
- God
-
- Posts: 1970
- Joined: Tue 06.05.2003, 15:49
- Location: Chalfont St Peter, South Bucks
by clemo » Sun 15.07.2007, 14:38
or £8000 ..
the red one on pistonheads sold for !!!
Jim Clark S2 - 1/12. The one with the Yellow spoke wheels . No 613 on dash (pushed in to factory in wrong order 615 on tub)
-

clemo
- LEC Administrator
-
- Posts: 5069
- Joined: Mon 21.04.2003, 23:24
- Location: TORQUAY Devon. Cream first then Jam obviously.
by Oliver » Wed 18.07.2007, 17:45
I certainly wouldn`t flog mine for £5k.
- Attachments
-
2007__28.jpg
- (331.8 KiB) Downloaded 494 times
M100 N/A - No PAS
RenautSport Megane 275 Cup
MGF
Benelli 2C
-

Oliver
- Fanatic
-
- Posts: 414
- Joined: Tue 15.03.2005, 21:49
- Location: Maidstone, Kent
-
by Dave Eds » Wed 18.07.2007, 19:12
Hey Doug
He's got his wheels on backwards as well

-

Dave Eds
- Moderator
-
- Posts: 5137
- Joined: Thu 05.01.2006, 22:59
- Location: Wadesmill, Herts or Mickleton, Gloucs or somewhere else
by GeoffSmith » Wed 18.07.2007, 19:55
Dave Eds wrote:He's got his wheels on backwards as well

Bet they're only on backwards on the offside!

Calypso Red S2 #417
USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
-

GeoffSmith
- Kitty Fiddler
-
- Posts: 15628
- Joined: Fri 03.02.2006, 21:57
- Location: S2#417 in Tytherington, Gloucestershire
-
by GeoffSmith » Wed 18.07.2007, 19:57
Calypso Red S2 #417
USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
-

GeoffSmith
- Kitty Fiddler
-
- Posts: 15628
- Joined: Fri 03.02.2006, 21:57
- Location: S2#417 in Tytherington, Gloucestershire
-
Return to Projects - Other (Minor)
Who is online
Users browsing this forum: No registered users and 0 guests