| Home | WikiLEC | Repairs | Upgrades | Gallery | Buy & Sell | Mountain Chips | Meets & Events | Contact |
|
Part # ?
Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
14 posts
• Page 1 of 1
by RichyP » Thu 17.01.2008, 02:24
Try A100L0077F "grommet - pipe thro' body" it's in the induction section of the parts manual.
seem to remember this from a couple of years back and that the part was obsolete - could be wrong - it's late and i've got bolts on the brain!!
seem to remember this from a couple of years back and that the part was obsolete - could be wrong - it's late and i've got bolts on the brain!!
- RichyP
- Tinkerer
- Posts: 50
- Joined: Tue 12.04.2005, 13:16
- Location: Solihull
by dapinky » Thu 17.01.2008, 02:39
Cjay,
Not an exact replacement (but i think it's better than the lotus one 'cos it don't split like an out-of-date condom!)
SJ Sportscars:-
Fuel system | Air filter trunking
GROMMET, AIR PIPE tho INNER WING SJ100L0001 EACH 7.45
i did a group buy last year and ended up with about 40 of the buggers (unfortunately all sold!).
Everyone i know who had one is quite happy with it - it fits a treat and looks the part.
I believe it to actually be a fuel filler pipe seal off something or other, but don't know what!
there's a whole thread on it here
Not an exact replacement (but i think it's better than the lotus one 'cos it don't split like an out-of-date condom!)
SJ Sportscars:-
Fuel system | Air filter trunking
GROMMET, AIR PIPE tho INNER WING SJ100L0001 EACH 7.45
i did a group buy last year and ended up with about 40 of the buggers (unfortunately all sold!).
Everyone i know who had one is quite happy with it - it fits a treat and looks the part.
I believe it to actually be a fuel filler pipe seal off something or other, but don't know what!
there's a whole thread on it here
You do not have the required permissions to view the files attached to this post.
Dave
Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it
...oh, and a 2006 Freelander destined for the jungles of The Gambia - 4500 miles across roads, desert and tracks - what could possibly go wrong?
Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it
...oh, and a 2006 Freelander destined for the jungles of The Gambia - 4500 miles across roads, desert and tracks - what could possibly go wrong?
-
dapinky - LEC Administrator
- Posts: 10625
- Joined: Sun 15.10.2006, 12:54
- Location: As far west as you can get in West Wales before you become Irish (Pembroke Dock).
by Dave Eds » Thu 17.01.2008, 09:55
dapinky wrote:I believe it to actually be a fuel filler pipe seal off something or other, but don't know what!
An Esprit IIRC
Spud
'92 NM SE, '10 Evora NA now gone '90 Calypso SE now sold '62 Wolseley 1500
Spud's Cotswold Holiday Cottage for hire - LEC discount available
'92 NM SE, '10 Evora NA now gone '90 Calypso SE now sold '62 Wolseley 1500
Spud's Cotswold Holiday Cottage for hire - LEC discount available
-
Dave Eds - Moderator
- Posts: 5137
- Joined: Thu 05.01.2006, 22:59
- Location: Wadesmill, Herts or Mickleton, Gloucs or somewhere else
by Specky » Thu 17.01.2008, 11:22
I got an OEM Lotus gromet a couple of years ago and it split within a few weeks...
I guess it had been on the rack 15 years..
TTFN
I guess it had been on the rack 15 years..
TTFN
If you have a problem, if no one else can help, and if you can find them, maybe you can hire... The N/A-Team.
-
Specky - Moderator
- Posts: 5982
- Joined: Sun 07.09.2003, 23:19
- Location: Swindon
by GeoffSmith » Thu 17.01.2008, 13:51
Mine! 
It popped out a couple of times after first fitting it, but it's taken up the shape and is now fine.
It popped out a couple of times after first fitting it, but it's taken up the shape and is now fine.
Calypso Red S2 #417
USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
-
GeoffSmith - Kitty Fiddler
- Posts: 15628
- Joined: Fri 03.02.2006, 21:57
- Location: S2#417 in Tytherington, Gloucestershire
by Rambo » Thu 17.01.2008, 20:16
IMO Dave's replacement grommet looks much nicer and neater than the OE rubber.
And much cheaper too - I replaced mine back in 2004 with an OE "condom" and Lotus screwed me £17.59 + VAT
And much cheaper too - I replaced mine back in 2004 with an OE "condom" and Lotus screwed me £17.59 + VAT
-
Rambo - Don't push me
- Posts: 9144
- Joined: Wed 24.12.2003, 00:37
- Location: Both sides of the Tweed
by Enright » Sun 20.01.2008, 16:43
Russc wrote:Well i'm assuming Sj's will be at Donny, i need one as well.
So i'll start a list and then get Sj's to bring a load to donny for us all to buy
I don't recall SJ's ever being at Donington - are you sure you're not getting mixed up with SW?
You might end up having to buy a few and bring them up with you.
Striking fear into the hearts of duplicate posts everywhere...! 
BCingU,
Neil
BCingU,
Neil
-
Enright - Modificator
- Posts: 4860
- Joined: Sun 19.12.2004, 19:21
- Location: Arnold, Nottingham, England
14 posts
• Page 1 of 1
Return to Hood/Top, Bodywork and Fittings
Who is online
Users browsing this forum: No registered users and 2 guests