Lotus Elan Central

Everything M100

Skip to content

Bling, courtesy of Geordie enterprises

Start your Group Buy threads here for anything pertaining to the M100

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Post a reply

Postby GeoffSmith » Sun 17.02.2008, 22:42

F***ing hell - where have they all come from! Are you sure you've all got Pecos? :D

Ailwyn, I'm putting another order in soon. The wastegate studs are made to order and take about a week so I'll add a couple of sets (I don't want to overload him) and seeing as it's you, I'll post them on! :-D

-------------------------------------------------------

I intend to bring the bling to Dony as I don't enjoy packing and posting - I've given an approximate idea of cost but as you've obviously got more money than sense, prepared to be fleeced! I've put you down for what I think you want - please delete anything you don't want as I'm sure you don't want everything.
Don't forget Dave's other kits - we may add other sets as time goes on (e.g fully stainless exhaust clamps) so keep your eyes peeled and amend the list as necessary. If you've got any suggestions, feel free to ask.


A - Wastegate Stud Set (WSS) £20
B - Cam Cover Centre Cover (CCCC) £6
C - CAS cover and internal brackets (CAS) £6
D - Oil Separator cover (OS) £6
E - Peco rear hanger (PECO1) £1.50

1. Paza1 - B,C
2. Paul.P - A,C,D,E
3. Ailwyn - A,B,C,D,E
4. Ailwyn - A,B,C,D,E
5. Pinky - A,B,C,D,E
6. Surferphil - A,B,C,D,E
7. Surferphil - A,B,C,D,E
8. theelanman - A,B,C,D,E
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire
Top

Postby GeoffSmith » Sun 17.02.2008, 22:47

ailwyn wrote:Any news on the manifold to engine studs/nuts.

Ailwyn


So far a blank - Dave and I independently thought we'd found some (mine stainless, his not) but the flanges were too big. I'm lucky that my nuts aren't in too bad a condition though. We'll keep looking.
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire
Top

Postby Doug » Mon 18.02.2008, 05:43

how about the very visible bolts that hold the body shell to the frame all around the engine bay? . . . :roll:
Image
User avatar
Doug
LEC Founder
 
Posts: 7468
Joined: Thu 17.04.2003, 06:43
Location: Oregon Coast, USA
Top

Postby GeoffSmith » Mon 18.02.2008, 09:11

Doug wrote:how about the very visible bolts that hold the body shell to the frame all around the engine bay? . . . :roll:


Yep. That's in the plan. And stop rolling your eyes at me! :lol:
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire
Top

Postby dapinky » Mon 18.02.2008, 09:54

Just edited a bit - I ain't rich enough to get the lot!

Besides that i ain't got a peco and recently replaced the WSS & CAS sets!


A - Wastegate Stud Set (WSS) £20
B - Cam Cover Centre Cover (CCCC) £6
C - CAS cover and internal brackets (CAS) £6
D - Oil Separator cover (OS) £6
E - Peco rear hanger (PECO1) £1.50

1. Paza1 - B,C
2. Paul.P - A,C,D,E
3. Ailwyn - A,B,C,D,E
4. Ailwyn - A,B,C,D,E
5. Pinky - B,D.
6. Surferphil - A,B,C,D,E
7. Surferphil - A,B,C,D,E
8. theelanman - A,B,C,D,E
Dave

Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it


...oh, and a 2006 Freelander destined for the jungles of The Gambia - 4500 miles across roads, desert and tracks - what could possibly go wrong?
User avatar
dapinky
LEC Administrator
 
Posts: 10625
Joined: Sun 15.10.2006, 12:54
Location: As far west as you can get in West Wales before you become Irish (Pembroke Dock).
Top

Postby theelanman » Mon 18.02.2008, 13:00

Ive not got a PECO either so I'll skip that one

A - Wastegate Stud Set (WSS) £20
B - Cam Cover Centre Cover (CCCC) £6
C - CAS cover and internal brackets (CAS) £6
D - Oil Separator cover (OS) £6
E - Peco rear hanger (PECO1) £1.50

1. Paza1 - B,C
2. Paul.P - A,C,D,E
3. Ailwyn - A,B,C,D,E
4. Ailwyn - A,B,C,D,E
5. Pinky - B,D.
6. Surferphil - A,B,C,D,E
7. Surferphil - A,B,C,D,E
8. theelanman - A,B,C,D

just gotta get the ones for the rubber lip and under the rear valance now :-D
I’m normally not a praying man, but if you’re up there, please save me, Superman.
User avatar
theelanman
Moderator
 
Posts: 7296
Joined: Fri 30.04.2004, 15:52
Location: peak district
Top

Geordie Bling

Postby woody » Mon 18.02.2008, 13:13

Count me in for a full set,
A - Wastegate Stud Set (WSS) £20
B - Cam Cover Centre Cover (CCCC) £6
C - CAS cover and internal brackets (CAS) £6
D - Oil Separator cover (OS) £6
E - Peco rear hanger (PECO1) £1.50

1. Paza1 - B,C
2. Paul.P - A,C,D,E
3. Ailwyn - A,B,C,D,E
4. Ailwyn - A,B,C,D,E
5. Pinky - B,D.
6. Surferphil - A,B,C,D,E
7. Surferphil - A,B,C,D,E
8. theelanman - A,B,C,D
9. Woody - A,B,C,D,E
Cheers,
User avatar
woody
Fanatic
 
Posts: 529
Joined: Thu 04.03.2004, 17:38
Location: Nottingham, and Matlock UK
Top

Postby Gazza » Mon 18.02.2008, 19:22

A - Wastegate Stud Set (WSS) £20
B - Cam Cover Centre Cover (CCCC) £6
C - CAS cover and internal brackets (CAS) £6
D - Oil Separator cover (OS) £6
E - Peco rear hanger (PECO1) £1.50

1. Paza1 - B,C
2. Paul.P - A,C,D,E
3. Ailwyn - A,B,C,D,E
4. Ailwyn - A,B,C,D,E
5. Pinky - B,D.
6. Surferphil - A,B,C,D,E
7. Surferphil - A,B,C,D,E
8. theelanman - A,B,C,D
9. Woody - A,B,C,D,E
10.Gazza - A,C,D

Cheers,
S2 Midnight Blue #660
Hayward & Scott 2.5" exhaust.
Red AP brakes & Nitron adjustable suspension.
SOLD

TVR Tamora in Montreal Blue
User avatar
Gazza
God
 
Posts: 1703
Joined: Sun 15.05.2005, 08:55
Location: Romford, Essex.
Top

Postby lotusgirlmarie » Mon 18.02.2008, 19:47

Had you thought about copper exhaust bolts? They are in common use of many Ferrari's and 'Ghinis.
Must....................Go...............Faster
User avatar
lotusgirlmarie
Goddess
 
Posts: 1434
Joined: Thu 14.07.2005, 07:35
Location: Earth or there abouts
Top

Postby Dico » Mon 18.02.2008, 21:32

A - Wastegate Stud Set (WSS) £20
B - Cam Cover Centre Cover (CCCC) £6
C - CAS cover and internal brackets (CAS) £6
D - Oil Separator cover (OS) £6
E - Peco rear hanger (PECO1) £1.50

1. Paza1 - B,C
2. Paul.P - A,C,D,E
3. Ailwyn - A,B,C,D,E
4. Ailwyn - A,B,C,D,E
5. Pinky - B,D.
6. Surferphil - A,B,C,D,E
7. Surferphil - A,B,C,D,E
8. theelanman - A,B,C,D
9. Woody - A,B,C,D,E
10. Gazza - A,C,D
11. Dico - C,D
4+ hours stuck in a damp bucket seat with a mad Irishman at the wheel - Deep joy!!!!
User avatar
Dico
Fool Boy Four - Founder
 
Posts: 3569
Joined: Mon 01.12.2003, 09:45
Location: Moderator Manchester
Top

Postby Rambo » Mon 18.02.2008, 22:48

Maybe Geordie Enterprises could make a set of stainless bolts for the Angel of the North. They were looking a bit rusty last time I passed Gateshead !! Why aye man.
Attachments
angel.jpg
Angel of the North needs Geordie Enterprises
angel.jpg (37.14 KiB) Viewed 7735 times
User avatar
Rambo
Don't push me
 
Posts: 9144
Joined: Wed 24.12.2003, 00:37
Location: Both sides of the Tweed
Top

Postby GeoffSmith » Mon 18.02.2008, 23:03

Wave to me Mam and Dad next time..............................................................................just about down here↓
Image
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire
Top

Postby Rambo » Mon 18.02.2008, 23:09

geoffsmith wrote:Wave to me Mam and Dad next time..............................................................................just about down here↓
Image


How will I recognize them Geoff ? Do they have wayward hair and stainless steel hip joints ? :lol:
User avatar
Rambo
Don't push me
 
Posts: 9144
Joined: Wed 24.12.2003, 00:37
Location: Both sides of the Tweed
Top

Postby GeoffSmith » Mon 18.02.2008, 23:27

Rambo wrote:
geoffsmith wrote:Wave to me Mam and Dad next time..............................................................................just about down here↓
Image


How will I recognize them Geoff ? Do they have wayward hair and stainless steel hip joints ? :lol:


No, they're quite normal.
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire
Top

Postby paza1 » Mon 18.02.2008, 23:31

Slight change for me below:

A - Wastegate Stud Set (WSS) £20
B - Cam Cover Centre Cover (CCCC) £6
C - CAS cover and internal brackets (CAS) £6
D - Oil Separator cover (OS) £6
E - Peco rear hanger (PECO1) £1.50

1. Paza1 - B,D
2. Paul.P - A,C,D,E
3. Ailwyn - A,B,C,D,E
4. Ailwyn - A,B,C,D,E
5. Pinky - B,D.
6. Surferphil - A,B,C,D,E
7. Surferphil - A,B,C,D,E
8. theelanman - A,B,C,D
9. Woody - A,B,C,D,E
10. Gazza - A,C,D
11. Dico - C,D

Thanks
Mark
Silver 1992 SE Turbo.
paza1
Fanatic
 
Posts: 687
Joined: Thu 09.06.2005, 22:46
Location: Chester
Top

Postby GeoffSmith » Mon 18.02.2008, 23:35

:smt023 Thanks Mark, nicely back on topic.
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire
Top

Postby paza1 » Mon 18.02.2008, 23:40

:lol: You're welcome
Silver 1992 SE Turbo.
paza1
Fanatic
 
Posts: 687
Joined: Thu 09.06.2005, 22:46
Location: Chester
Top

Postby DeeAitch » Mon 18.02.2008, 23:47

Do you guys really want bling on the exhaust hanger :shock:
I can hardly be ars... bothered to polish the tailpipe :twisted:
User avatar
DeeAitch
God
 
Posts: 1773
Joined: Fri 09.05.2003, 22:11
Location: North East
Top

Postby surfboardfiller » Mon 18.02.2008, 23:50

A - Wastegate Stud Set (WSS) £20
B - Cam Cover Centre Cover (CCCC) £6
C - CAS cover and internal brackets (CAS) £6
D - Oil Separator cover (OS) £6
E - Peco rear hanger (PECO1) £1.50
F - Full Clam Fixing Kit (FrClam) £....

1. Paza1 - B,D
2. Paul.P - A,C,D,E
3. Ailwyn - A,B,C,D,E
4. Ailwyn - A,B,C,D,E
5. Pinky - B,D.
6. Surferphil - A,B,C,D,F
7. Surferphil - A,B,C,D,F
8. theelanman - A,B,C,D
9. Woody - A,B,C,D,E
10. Gazza - A,C,D
11. Dico - C,D

Cheers,

Phil :-D
User avatar
surfboardfiller
God
 
Posts: 2857
Joined: Sat 22.10.2005, 14:08
Location: Somerset - England
Top

Postby GeoffSmith » Mon 18.02.2008, 23:57

Thanks Dave - a good job one of us is on the ball. Just to confirm:

A - Wastegate Stud Set (WSS) £20
B* - Cam Cover Centre Cover (CCCC) £6
C* - CAS cover and internal brackets (CAS†) £6
D* - Oil Separator cover (OS†) £6
E - Peco rear hanger (PECO1) £1.50
Z - Full Clam Fixing Kit (FrClam) £....

* Denotes polished - we'll price up unpolished if requested.

1. Paza1 - B*,D*
2. Paul.P - A,C*,D*,E
3. Ailwyn - A,B*,C*,D*,E
4. Ailwyn - A,B*,C*,D*,E
5. Pinky - B*,D*
6. Surferphil - A,B*,C*,D*,Z
7. Surferphil - A,B*,C*,D*,Z
8. theelanman - A,B,C,D
9. Woody - A,B*,C*,D*,E
10. Gazza - A,C*,D*
11. Dico - C*,D*
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire
Top
PreviousNext
Post a reply

Return to Group Buys

Who is online

Users browsing this forum: No registered users and 2 guests

© 1998 – 2026 Lotus Elan Central. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group