Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
by Ekapol » Mon 03.03.2008, 00:08
Installed Alan's custom chip (0.63 bar fuel cut), new washer jet, CAS o-ring.
Everest is on the top. The one in the bottom is the new one with my name on it.
Up the boost to 15 psi now. Thought I could shift pretty fast from 1st-2nd already but really that I felt I'm too slow on the shifting. Traction is also not so much there on 1st and 2nd gear.
Last edited by
Ekapol on Sun 09.03.2008, 10:08, edited 3 times in total.
"Do or do not.... there is no try."
“Named must your fear be before banish it you can.” -- Yoda
-
Ekapol
- God
-
- Posts: 1463
- Joined: Mon 19.06.2006, 21:55
- Location: Sin City
by tigerdog » Mon 03.03.2008, 00:59
Ekapol wrote:Installed Alan's custom chip (0.63 bar fuel cut), new washer jet, CAS o-ring.
Up the boost to 15 psi now. Thought I could shift pretty fast from 1st-2nd already but really that I felt I'm too slow on the shifting. Traction is also not so much there on 1st and 2nd gear.
15 PSI is lots of fun. Smaug currently peaks at 16. Can your fancy electronic boost controller limit boost as a function of RPM so you don't break loose quite so easily?
-
tigerdog
- God
-
- Posts: 2715
- Joined: Tue 20.03.2007, 09:07
- Location: San Diego, CA, USA
by Ekapol » Sun 09.03.2008, 10:04
tigerdog wrote:Can your fancy electronic boost controller limit boost as a function of RPM so you don't break loose quite so easily?
It might take me a little while to get familiar with it....
A bit strange seeing that the gauges are not even there.
"Do or do not.... there is no try."
“Named must your fear be before banish it you can.” -- Yoda
-
Ekapol
- God
-
- Posts: 1463
- Joined: Mon 19.06.2006, 21:55
- Location: Sin City
by tigerdog » Sun 09.03.2008, 14:51
I guess there's an LGM gauge conversion in your future? Or just new dial faces?
-
tigerdog
- God
-
- Posts: 2715
- Joined: Tue 20.03.2007, 09:07
- Location: San Diego, CA, USA
by dapinky » Sun 09.03.2008, 16:05
Perhaps you need to install some extra security - why are those 2 dodgy looking people being allowed to rip bits out of your car and run away????? What are the Police doing about it???
Dave
Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it
...oh, and a 2006 Freelander destined for the jungles of The Gambia - 4500 miles across roads, desert and tracks - what could possibly go wrong?
-
dapinky
- LEC Administrator
-
- Posts: 10625
- Joined: Sun 15.10.2006, 12:54
- Location: As far west as you can get in West Wales before you become Irish (Pembroke Dock).
by GeoffSmith » Sun 09.03.2008, 16:50
Ekapol wrote:The one in the bottom is the new one with my name on it.
Does it really? Deer me.
Calypso Red S2 #417
USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
-
GeoffSmith
- Kitty Fiddler
-
- Posts: 15628
- Joined: Fri 03.02.2006, 21:57
- Location: S2#417 in Tytherington, Gloucestershire
-
by TheBard » Tue 25.03.2008, 23:43
Ah, recovering from minor surgery (nothing exciting) is a great excuse to catch up on projects... Ekapol, Stripey looks great mate, but can you please dirty up the engine bay a bit so I don't feel so guilty about mine, the shine there is dazzling
Ford Fiesta Mk2, VW Polo, Golf GTi, Lotus Elan, Honda Accord Coupe V6.
Calypso Red Cali #7683 - Bought at 29,000 miles, and sold at 75,000miles.
-
TheBard
- Fanatic
-
- Posts: 652
- Joined: Sun 16.01.2005, 05:22
- Location: Washington D.C.
-
by Ekapol » Wed 26.03.2008, 18:59
TheBard wrote:Ekapol, Stripey looks great mate, but can you please dirty up the engine bay a bit so I don't feel so guilty about mine, the shine there is dazzling
Hope you get well soon.
Don't worry mate. I've already added a dab or 2 of the engine oil there, just to make you happy
More pictures: Look what happened when you let a good looking girl getting to close to you car...
"Do or do not.... there is no try."
“Named must your fear be before banish it you can.” -- Yoda
-
Ekapol
- God
-
- Posts: 1463
- Joined: Mon 19.06.2006, 21:55
- Location: Sin City
by Ekapol » Fri 04.04.2008, 12:31
Had a brief photoshoot the other day.
"Do or do not.... there is no try."
“Named must your fear be before banish it you can.” -- Yoda
-
Ekapol
- God
-
- Posts: 1463
- Joined: Mon 19.06.2006, 21:55
- Location: Sin City
by tigerdog » Fri 04.04.2008, 15:33
Nice car!
-
tigerdog
- God
-
- Posts: 2715
- Joined: Tue 20.03.2007, 09:07
- Location: San Diego, CA, USA
by GeoffSmith » Fri 04.04.2008, 17:25
tigerdog wrote:Nice car!
God damn it Doug, who's looking at the car?
Calypso Red S2 #417
USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
-
GeoffSmith
- Kitty Fiddler
-
- Posts: 15628
- Joined: Fri 03.02.2006, 21:57
- Location: S2#417 in Tytherington, Gloucestershire
-
by lotusgirlmarie » Fri 04.04.2008, 18:08
that's my girl!!! Go Karina!!! Its your birthday......
Must....................Go...............Faster
-
lotusgirlmarie
- Goddess
-
- Posts: 1434
- Joined: Thu 14.07.2005, 07:35
- Location: Earth or there abouts
by Ekapol » Fri 04.04.2008, 18:42
Hi Ekapol.
For all our previous dealings, I thought you were a bloke
After seeing your pics on your Stripey thread I can see your a gorgeous chic!
That'll teach me to jump to conclusions.
Hope you are well!
Paul
Couldn't resist posting this IM from Paul Watkins
Glad you like my self-portrait Paul
"Do or do not.... there is no try."
“Named must your fear be before banish it you can.” -- Yoda
-
Ekapol
- God
-
- Posts: 1463
- Joined: Mon 19.06.2006, 21:55
- Location: Sin City
by Enright » Fri 04.04.2008, 22:29
Naughty Watkins!
But Ekapol, if she's you, who's he?!?
Striking fear into the hearts of duplicate posts everywhere...! 
BCingU,
Neil
-
Enright
- Modificator
-
- Posts: 4860
- Joined: Sun 19.12.2004, 19:21
- Location: Arnold, Nottingham, England
by Ekapol » Fri 04.04.2008, 22:40
Enright wrote:Naughty Watkins!
But Ekapol, if she's you, who's he?!?
Naughty Enright!
Kinda look like this guy
HERE 
"Do or do not.... there is no try."
“Named must your fear be before banish it you can.” -- Yoda
-
Ekapol
- God
-
- Posts: 1463
- Joined: Mon 19.06.2006, 21:55
- Location: Sin City
by theelanman » Sat 05.04.2008, 01:19
I’m normally not a praying man, but if you’re up there, please save me, Superman.
-
theelanman
- Moderator
-
- Posts: 7296
- Joined: Fri 30.04.2004, 15:52
- Location: peak district
-
by Ekapol » Sat 05.04.2008, 07:44
theelanman wrote:this thread appears to have been invaded by east midland wanna bees and is now completely off topic
You mean... perhaps... I should show you the picture of my new LGM turbo heatshield indeed
"Do or do not.... there is no try."
“Named must your fear be before banish it you can.” -- Yoda
-
Ekapol
- God
-
- Posts: 1463
- Joined: Mon 19.06.2006, 21:55
- Location: Sin City
by Monty » Sat 05.04.2008, 11:00
The Engine bay is looking superb and look at that lovely turbo. I want I want I want
lol Maybe one year
-
Monty
- Chunder King!
-
- Posts: 7977
- Joined: Sun 11.01.2004, 22:32
- Location: Leeds
by Enright » Sat 05.04.2008, 11:10
You don't want that one - it's got a big bend in the middle!
Oh alright, it looks
quite nice.
Good skills in getting us back on topic though Ekkers!
Striking fear into the hearts of duplicate posts everywhere...!
BCingU,
Neil
-
Enright
- Modificator
-
- Posts: 4860
- Joined: Sun 19.12.2004, 19:21
- Location: Arnold, Nottingham, England
by F1 LOTUS » Sun 06.04.2008, 03:15
Fine piece of kit Ekkers - well played
Photo must be a candidate for the '09 calendar...
(if you straighten-up that filler cap
)
-
F1 LOTUS
- God
-
- Posts: 2199
- Joined: Thu 17.04.2003, 18:17
- Location: SoCal, USA
Return to Projects - Car (Major)
Who is online
Users browsing this forum: No registered users and 2 guests
