Cambelt change and water pump

Alternator, waterpump, A/C, sensors, CAS, etc.

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

cam belt bits

Postby MIKCARUS » Sun 30.03.2008, 11:51

Hi ,
THanks to all who put info on here as I bought all the bits from Rock Auto , brill' guys and fast ,got cam belt, tensioner, idler ,water pump and gasket in four days for circa £140 used Fedex --no tax .!!!amazing try to get service like that herein the U.K.!!

Just got to fit it all! <OH S##T!!>

Cheers MIKE. :lol:
Noisy pipes are safe pipes!
MIKCARUS
Tinkerer
 
Posts: 50
Joined: Thu 21.02.2008, 12:58
Location: Ripon, North Yorks'U.K.

Postby Oliver » Sun 30.03.2008, 13:46

dapinky wrote:Well, Oliver -

You'll be pleased to know that you haven't bought a Pattern part at all - the Rockauto ones are Isuzu OE, therefore also Lotus OE, the only difference is in the packaging (and price tag!).

That's one of the reasons we all bought 'em :-D


That`s good to know. It has got `Japan` cast into it, so as you say, it should be the real thing, but at 75% cheaper than the UK price, that is just an added bonus. As i said before, i will definately use RockAuto again, and Sugar Land, Texas does sound like an intresting place.

Oliver
M100 N/A - No PAS
RenautSport Megane 275 Cup
MGF
Benelli 2C
User avatar
Oliver
Fanatic
 
Posts: 414
Joined: Tue 15.03.2005, 21:49
Location: Maidstone, Kent

Postby L.G. » Mon 28.04.2008, 14:38

Guys, I'll get the cambelt stuff done tomorrow by a garage who has never laid their hands on a Lotus or an Isuzu. I am taking the write up in the wiki alongside with the manual. I couldn't see anything about the alternator and a.c. pas belt change in the manual. Do you know a section where there is info on this?

If you want to give any last minute advices I'd be more than happy to hear them.

Cheers,
L.G.
'95 S2 driver #286
User avatar
L.G.
Fanatic
 
Posts: 319
Joined: Wed 07.09.2005, 22:34
Location: Istanbul/Turkey

Postby John_W » Mon 28.04.2008, 21:44

L.G. wrote: I couldn't see anything about the alternator and a.c. pas belt change in the manual. Do you know a section where there is info on this?

LG,
There's not much to be said about the power steering and alternator belts change, really. Just undo the obvious nuts & bolts to allow the alternator and power steering pump to swivel and release the tension, then the belts come off.

The only difficult thing is gaining access to the alternator tensioning bolt which I could only turn 1 flat at a time, while maintaining tension on the belt using my third hand.

Sorry if that's not a lot of help.

John
User avatar
John_W
Heid-bummer
 
Posts: 3780
Joined: Mon 21.04.2003, 12:31
Location: Aberdeen

Postby L.G. » Mon 28.04.2008, 23:12

I thought they would be easier than the rest of the work but still wanted to ask.

As I have no experience on this, anything is new information for me so you were helpful thanks John.

Cheers,
L.G.
'95 S2 driver #286
User avatar
L.G.
Fanatic
 
Posts: 319
Joined: Wed 07.09.2005, 22:34
Location: Istanbul/Turkey

Previous

Return to Engine Ancillaries

Who is online

Users browsing this forum: No registered users and 2 guests