Alternator, waterpump, A/C, sensors, CAS, etc.
Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
by HJ2 » Tue 06.01.2009, 16:26
Just now i removed my CAS to swap the seal before it gives problems. (The bung seal did...)
As i held the unit in my hand and rotate the axle, it doesn't run smooth all the way round. Ik feels like it is hanging a bit in every rotation.
Is this intentional, or are my bearings gone? If so, is it possible to swap them, or do i have to deliver 10.000 papers to afford a complete new unit?
Please advise
If you always do what you always did, you always get what you always got
-
HJ2
- Wodan - God of the Low Lands
-
- Posts: 4405
- Joined: Fri 06.06.2008, 10:54
- Location: Delft, the Netherlands
by lotuska » Tue 06.01.2009, 18:22
Does the stiffness coincide when one of the slots matches with any of the sensors??
From memory when I last had the CAS off there was a change in the feel of the CAS when rotating due to one of the magnetic pickups.
-
lotuska
- Fanatic
-
- Posts: 283
- Joined: Wed 23.04.2003, 17:52
- Location: Redditch
by HJ2 » Tue 06.01.2009, 18:42
I'll check it out in a moment.
But that has to be one hell of a magnet...
If you always do what you always did, you always get what you always got
-
HJ2
- Wodan - God of the Low Lands
-
- Posts: 4405
- Joined: Fri 06.06.2008, 10:54
- Location: Delft, the Netherlands
by GeoffSmith » Tue 06.01.2009, 20:51
lotuska wrote:Does the stiffness coincide when one of the slots matches with any of the sensors??
From memory when I last had the CAS off there was a change in the feel of the CAS when rotating due to one of the magnetic pickups.
Mine was very lumpy too but quite normal for a variable reluctance pickup I think.
Calypso Red S2 #417
USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
-
GeoffSmith
- Kitty Fiddler
-
- Posts: 15628
- Joined: Fri 03.02.2006, 21:57
- Location: S2#417 in Tytherington, Gloucestershire
-
by HJ2 » Tue 06.01.2009, 21:28
Just checked....
It's true, it is a hell of a magnet!
Thanks, ik can go to sleep just fine now
If you always do what you always did, you always get what you always got
-
HJ2
- Wodan - God of the Low Lands
-
- Posts: 4405
- Joined: Fri 06.06.2008, 10:54
- Location: Delft, the Netherlands
by ovi » Thu 08.01.2009, 09:24
HJ2 wrote:Just checked....
It's true, it is a hell of a magnet!
Thanks, ik can go to sleep just fine now
Hahaa, hier zitte!
Here you are!I have found you.
-
ovi
- Enthusiast
-
- Posts: 233
- Joined: Sun 17.08.2008, 15:45
- Location: Belgium
Return to Engine Ancillaries
Who is online
Users browsing this forum: No registered users and 1 guest
