Wheel centre caps

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Wheel centre caps

Postby PAUL30 » Thu 19.03.2009, 23:08

I have the original style wheels on my car except they are 16 inch rims. The centre caps already on the car are 50mm. I have searched this site and the web and can't seem to find any in that size. Can any one advise.

Thanks
User avatar
PAUL30
Enthusiast
 
Posts: 159
Joined: Sat 27.11.2004, 23:42
Location: glasgow

Re: Wheel centre caps

Postby dapinky » Fri 20.03.2009, 11:16

Paul,

Let me see if i understand you here......

When you say you have original style wheels, in a 16" diameter, do you mean the S2 wheels made by BBS (basically a 5-spoke design), or the SE/NA wheels made by OZ.
If they look like the SE/NA wheels, but are definately 16", then it sounds like you have the Fed wheels (similar in looks to the 15", but the 'spokes' are straight (radially), not swept slightly backwards (or forwards on the other side of the car!).

I suspect we are talking about OZ Federal wheels, in which case the centre cap is the same as the SE/NA, and actually has an Esprit part number (which someone with a better memory will be able to quote).

They should still be availlable from Lotus Aftersales, and cost about a fiver each (that's for the whole thing, not just the badge).
Dave

Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it


...oh, and a 2006 Freelander destined for the jungles of The Gambia - 4500 miles across roads, desert and tracks - what could possibly go wrong?
User avatar
dapinky
LEC Administrator
 
Posts: 10605
Joined: Sun 15.10.2006, 12:54
Location: As far west as you can get in West Wales before you become Irish (Pembroke Dock).

Re: Wheel centre caps

Postby PAUL30 » Fri 20.03.2009, 12:06

Yep oz federal wheels, couldn't remember that last night :lol: .

I did come across the part number for the esprit ones. Cheers, will track that down again and check the aftersales list.
User avatar
PAUL30
Enthusiast
 
Posts: 159
Joined: Sat 27.11.2004, 23:42
Location: glasgow

Re: Wheel centre caps

Postby dapinky » Fri 20.03.2009, 12:50

A082G6071F :wink:
Dave

Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it


...oh, and a 2006 Freelander destined for the jungles of The Gambia - 4500 miles across roads, desert and tracks - what could possibly go wrong?
User avatar
dapinky
LEC Administrator
 
Posts: 10605
Joined: Sun 15.10.2006, 12:54
Location: As far west as you can get in West Wales before you become Irish (Pembroke Dock).

Re: Wheel centre caps

Postby Jackonicko » Fri 20.03.2009, 15:30

I'll swap em for a set of 15 in OZ wheels, if you like!
Jackonicko
 

Re: Wheel centre caps

Postby GeoffSmith » Fri 20.03.2009, 15:39

Jackonicko wrote:I'll swap em for a set of 15 in OZ wheels, if you like!

Set of Oz wheels for a set of centre caps........ Billy Bargain! :twisted:
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire

Re: Wheel centre caps

Postby PAUL30 » Fri 20.03.2009, 16:20

dapinky wrote:A082G6071F :wink:


Cheers!!!
User avatar
PAUL30
Enthusiast
 
Posts: 159
Joined: Sat 27.11.2004, 23:42
Location: glasgow


Return to Wheels and Tyres

Who is online

Users browsing this forum: No registered users and 8 guests