Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
by tractor10_0 » Tue 22.09.2009, 16:07
Hi Im after a new black hood and rubbers for my Elan se 1990 im in Hampshire.Anybody point me in the right direction?

-
tractor10_0
- Welcome to LEC - please introduce yourself
-
- Posts: 1
- Joined: Tue 22.09.2009, 16:01
by theelanman » Tue 22.09.2009, 17:25
think trim tech in beworth still have them....but not sure....
youd need to ring and speak to dean holt
tel...02476646000
I’m normally not a praying man, but if you’re up there, please save me, Superman.
-

theelanman
- Moderator
-
- Posts: 7296
- Joined: Fri 30.04.2004, 15:52
- Location: peak district
-
by surfboardfiller » Wed 23.09.2009, 11:03
I think Clemo has the last ones, send him a PM (hes a very decent chap):
memberlist.php?mode=viewprofile&u=39A pilar rubber seals are available from Lotus and other bits are often on Ebay but should not cost much as they were sold off cheap from Lotus recently.

-

surfboardfiller
- God
-
- Posts: 2857
- Joined: Sat 22.10.2005, 14:08
- Location: Somerset - England
by theelanman » Wed 23.09.2009, 11:58
surfboardfiller wrote:I think Clemo has the last ones, send him a PM (hes a very decent chap):
memberlist.php?mode=viewprofile&u=39A pilar rubber seals are available from Lotus and other bits are often on Ebay but should not cost much as they were sold off cheap from Lotus recently.

thats the one....
think Clemo has the hoods......think TT have the seals.....
I’m normally not a praying man, but if you’re up there, please save me, Superman.
-

theelanman
- Moderator
-
- Posts: 7296
- Joined: Fri 30.04.2004, 15:52
- Location: peak district
-
by bobbrown » Wed 23.09.2009, 14:50
an alternative
http://www.carhood.com/lotus.htm Think they quoted £650 inc vat fitted in Mohair
Bob
Pacific Blue N/A
" When you’re up to your arse in alligators, it’s difficult to remember that the object of the exercise is to drain the swamp"
please use email for correspondence
-

bobbrown
- God
-
- Posts: 2804
- Joined: Wed 10.05.2006, 12:51
- Location: North Essex
by nickb » Mon 28.09.2009, 14:00
Think Clem had the last complete hoods inc new frames, Trim tech should still have the hoods and seals, you can buy them together or seperate and they will do you a deal, Deans a nice guy to talk to.
Nick
-

nickb
- Enthusiast
-
- Posts: 162
- Joined: Wed 27.04.2005, 10:27
- Location: Essex
Return to Hood/Top, Bodywork and Fittings
Who is online
Users browsing this forum: SemrushBot and 2 guests