Alternator, waterpump, A/C, sensors, CAS, etc.
Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
by Lotus54 » Sat 15.10.2011, 22:00
Since the incident with one of my haywire AC hoses, I need to replace it and get the system recharged (I did evacuate e system so didn't loose it all).
I need to get a nre receiver/drier though (staying with 134) and if anyone knows a part number I would certainly appreciate it!
Mark
1978 Benelli 750 sei, 1972 Benelli 175 Enduro, 2018 Beta Xtrainer 300
-

Lotus54
- Enthusiast
-
- Posts: 191
- Joined: Tue 26.07.2011, 04:10
- Location: Port Angeles, WA USA
by lotusgirlmarie » Sun 16.10.2011, 04:52
Must....................Go...............Faster
-

lotusgirlmarie
- Goddess
-
- Posts: 1434
- Joined: Thu 14.07.2005, 07:35
- Location: Earth or there abouts
by Lotus54 » Sun 16.10.2011, 06:57
Thanks a bunch!!!
Just ordered it.
Mark
1978 Benelli 750 sei, 1972 Benelli 175 Enduro, 2018 Beta Xtrainer 300
-

Lotus54
- Enthusiast
-
- Posts: 191
- Joined: Tue 26.07.2011, 04:10
- Location: Port Angeles, WA USA
by lotusgirlmarie » Sun 16.10.2011, 08:25
No worries. Also make sure your trinary switch is a male thread. Some Fed elans came with female threaded switches. The company I refered you to sells the switches too. Reasonably priced. You just need to swap the wires and plugs. Easy solder job.
Must....................Go...............Faster
-

lotusgirlmarie
- Goddess
-
- Posts: 1434
- Joined: Thu 14.07.2005, 07:35
- Location: Earth or there abouts
by Lotus54 » Sun 23.10.2011, 19:52
Dang, I got it, but the new one doesn't have a place at all to thread the switch into.
Did yours not thread directly into the receiver/drier?
Guess I'll have to return it and fine the correct one.
Mark
I looked at the web site again, It looks like there are threads on the upper part of the drier, and I'll need to order a switch that will screw in.
You mentioned that but it didn't sink in...
Thanks
1978 Benelli 750 sei, 1972 Benelli 175 Enduro, 2018 Beta Xtrainer 300
-

Lotus54
- Enthusiast
-
- Posts: 191
- Joined: Tue 26.07.2011, 04:10
- Location: Port Angeles, WA USA
Return to Engine Ancillaries
Who is online
Users browsing this forum: No registered users and 5 guests