Help re: off-set 16" aftermarket wheels

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Help re: off-set 16" aftermarket wheels

Postby m100sandra » Tue 30.10.2012, 22:01

Out of boredom i think, ive been looking at wheels again, something which will fill the arches maybe a little? how does the ET work out when going for a wider wheel? i.e. Rota Grid 16" 7" 4x100mm ET40, not sure if im getting this wrong :? a ET 40 would stick out further then say the standard S2 16" wheels but with it been a 7" wide wheel would this make matters worse or better in relation to the standard off-set :? Just looking though....... but i like the Rota wheels but not sure if they would look good on a Black Elan? Photoshop anyone :-)

Sandra :? :?
Image
User avatar
m100sandra
Fanatic
 
Posts: 363
Joined: Sun 03.06.2012, 07:53
Location: York, UK

Re: Help re: off-set 16" aftermarket wheels

Postby MattDon » Tue 30.10.2012, 22:35

personaly id avoid going down this route, but i see your in york and i have a set of ET42 wheels that i had fitted to my elan for sale, you might need a hubcentric spacer to clear the brakes (i used 10mm to clear my hispecs) and if memory serves theyd need two tyres but have a gander to see if you like the look. personaly i thought they looked ace, and think they'd look even better on a black car.
please use email for contact
User avatar
MattDon
God
 
Posts: 858
Joined: Sat 29.09.2007, 21:38
Location: yorkshire

Re: Help re: off-set 16" aftermarket wheels

Postby m100sandra » Wed 31.10.2012, 11:42

The wheels do look nice, but i am looking for somthing a bit more curvy :) but thanks for the mention.

Ime getting more confused now :) just had a look on this wheel ET calculator http://www.1010tires.com/WheelOffsetCalculator.asp and ime getting the following:

Current wheel spec: Width 6 1/2 offset 60
New wheel spec: Width 7" offset 45

Results the same :?

Sandra
Image
User avatar
m100sandra
Fanatic
 
Posts: 363
Joined: Sun 03.06.2012, 07:53
Location: York, UK

Re: Help re: off-set 16" aftermarket wheels

Postby m100sandra » Wed 31.10.2012, 13:41

Not sure what happened with the 1st link it was showing the same for both wheel sizes :oops: Can anyone see any probs with this size wheel?
Image
Diameter 586mm 590.9mm
Circumference 1841mm 1856.4mm
Poke 16.2mm 43.9mm
Inset 136.2mm 133.9mm
Speedo error 0% -0.83%
Reading at 30mph 30mph 29.75mph
Reading at 60mph 60mph 59.5mph
Ride height gain 0mm 2.45mm
Arch gap loss 0mm 2.45mm
Image

Ime guessing :?: that the caliper clearence should be OK whith them not been a flat desighn?

Sandra
Image
User avatar
m100sandra
Fanatic
 
Posts: 363
Joined: Sun 03.06.2012, 07:53
Location: York, UK

Re: Help re: off-set 16" aftermarket wheels

Postby JIMBO » Wed 31.10.2012, 18:00

Hi Sandra,
This looks fine to me, however, you MAY experience a little more bump steer, but I am not
a good enough driver to notice such things.
Jim
JIMBO
Fanatic
 
Posts: 320
Joined: Tue 25.11.2003, 23:24

Re: Help re: off-set 16" aftermarket wheels

Postby texas2201 » Thu 01.11.2012, 23:42

I have some team dynamics in 16" in black with Hankook RS2's with good tread left on them
Image
"brakes are no good - they just slow you down" Fangio :-)
User avatar
texas2201
God
 
Posts: 1379
Joined: Fri 30.06.2006, 17:24
Location: Boos Eifel Germany

Re: Help re: off-set 16" aftermarket wheels

Postby texas2201 » Fri 02.11.2012, 19:38

Image

Looking for £265 for the wheels and tyres included - and I have a spare tyre with 5/6mm I will throw into the deal :-)
"brakes are no good - they just slow you down" Fangio :-)
User avatar
texas2201
God
 
Posts: 1379
Joined: Fri 30.06.2006, 17:24
Location: Boos Eifel Germany

Re: Help re: off-set 16" aftermarket wheels

Postby m100sandra » Fri 02.11.2012, 21:20

Thanks for the offer, again nice wheels but not what ime really after :? more on the lines of the picture i posted......... But out of interest, what's the offset? and did you have any probs with them on a Elan.
Image
User avatar
m100sandra
Fanatic
 
Posts: 363
Joined: Sun 03.06.2012, 07:53
Location: York, UK

Re: Help re: off-set 16" aftermarket wheels

Postby texas2201 » Sun 04.11.2012, 00:24

can't remember the offset 50? and no problem fitting them to the Elan - only thing was they used a different bolt - so I have one set of bolts for the S2's and another for these
"brakes are no good - they just slow you down" Fangio :-)
User avatar
texas2201
God
 
Posts: 1379
Joined: Fri 30.06.2006, 17:24
Location: Boos Eifel Germany

Re: Help re: off-set 16" aftermarket wheels

Postby m100sandra » Thu 15.11.2012, 13:07

post deleted
Image
User avatar
m100sandra
Fanatic
 
Posts: 363
Joined: Sun 03.06.2012, 07:53
Location: York, UK

Re: Help re: off-set 16" aftermarket wheels

Postby lotus23s10 » Fri 23.11.2012, 06:00

Hi --

I've been looking for a set of 5-spoke S2 wheels for my Federal M100(please contact me if you have a set - any condition), and liked these as an alternative:
http://www.carid.com/konig-wheels/feath ... 65341.html

tirewrack.com also has an app to show(kind of) how they look on the car they have OZ Feather in gold similar to the Konig's but more expensive.

Dan
User avatar
lotus23s10
Newbie
 
Posts: 41
Joined: Fri 01.07.2011, 11:56
Location: Bay Village, OH USA


Return to Wheels and Tyres

Who is online

Users browsing this forum: No registered users and 0 guests