hi ,exhaust info please

[tobyholland]

Hi all
I am after two stainless pipes ,they are the two middle ones out of the four sections ,my car only has a box on the rear,
Any ideas where they can be purchased, preferably from an UK exhaust manufacturer ,
Thanks
Toby

[chrisP]

It all depends on your current system and whether it is OEM or aftermarket?

[tb10]

I went to swap the back two sections from my wife's Elan to my Elan as she said her exhaust sounded too noisy. I then found out that they were two completely different exhaust systems so she's still got the noisy one

Regards

John

[Jeemy]

If you can measure the diameter of the pipe, likely 2", 2.25", or 2.5" (2.25" most likely on a stainless system) that will help with advice. Piper and Peco are the two usual suppliers of aftermarket SS exhausts, but I am not sure if there are differences in the pipe lengths which would make one system incompatible with another.

If you can get the pipe diameter and the length of the pipes, both easily measurable from underneath, then you should be able to source the exact part from one of those two, SJ Sportscars, Paul Matty or eBay.

PC+1

[Fredjohn]

In addition to Piper and Peco, there is also Powerflow who do stainless exhausts. Both 2.25" and 2.5"

http://www.powerflow.co.uk

Worth a look anyway

[tobyholland]

ah thanks for that info lads.
I thought the were the same , so that helps a lot
thankyou
toby

[tobyholland]

On the back box of my old stainless exhaust it is joined to short section of mild steel,, I have seen others similar is this normal and is it for a reason
Regards
Toby