Air Intake

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Air Intake

Postby AndyT » Tue 05.05.2015, 14:35

I'm guessing the two parts shown should be joined together with a rubber hose. Red to Blue

Does anybody know the name and part number?

Thanks

Andrew
You do not have the required permissions to view the files attached to this post.
User avatar
AndyT
Tinkerer
 
Posts: 53
Joined: Thu 06.03.2008, 23:35
Location: Clitheroe Lancashire

Re: Air Intake

Postby Fredjohn » Tue 05.05.2015, 14:53

Judging from your photo it's the same pipe/tube morcii was having trouble with. Behind the passenger wheel arch liner, directly below the bonnet hinge fittings.

See his thread here

Fortunately this bit is still available from, amongst others, SJ Sports Cars. Lotus part no. A100P0096F. Page 18.13A item 1 of the parts manual. Only costs about £6 plus the dreaded.
La vie passe vite: vivez la avec élan.

Elan SE turbo 1992
Emira 2023
Mercedes Benz C200 estate
Lotus Evija Danish edition
User avatar
Fredjohn
God
 
Posts: 2537
Joined: Tue 21.08.2012, 00:30
Location: Malvern, Worcs

Re: Air Intake

Postby Brit-Car-Nut » Tue 05.05.2015, 14:54

It is part # A100P0096F - Foam Connector, HVAC Wheel arch duct to plenum. Still available from Lotus at £5.63
Please contact me via eMail, not by PM
Brit-Car-Nut
God
 
Posts: 4820
Joined: Tue 03.07.2007, 17:07
Location: Charlotte, NC USA

Re: Air Intake

Postby Fredjohn » Tue 05.05.2015, 14:55

Brit-Car-Nut wrote:It is part # A100P0096F - Foam Connector, HVAC Wheel arch duct to plenum. Still available from Lotus at £5.63



SNAP!
La vie passe vite: vivez la avec élan.

Elan SE turbo 1992
Emira 2023
Mercedes Benz C200 estate
Lotus Evija Danish edition
User avatar
Fredjohn
God
 
Posts: 2537
Joined: Tue 21.08.2012, 00:30
Location: Malvern, Worcs

Re: Air Intake

Postby Brit-Car-Nut » Tue 05.05.2015, 15:03

But the SJS list only tells you what they have, the Lotus Factory price book tells what happened to every part Lotus offered, so it tells you replacement / substitute numbers or if it is obsolete, when that happened.
Please contact me via eMail, not by PM
Brit-Car-Nut
God
 
Posts: 4820
Joined: Tue 03.07.2007, 17:07
Location: Charlotte, NC USA

Re: Air Intake

Postby AndyT » Tue 05.05.2015, 15:10

Thanks for the quick reply!

Andrew
User avatar
AndyT
Tinkerer
 
Posts: 53
Joined: Thu 06.03.2008, 23:35
Location: Clitheroe Lancashire

Re: Air Intake

Postby dapinky » Tue 05.05.2015, 16:02

or you can use a piece of car tyre inner tube - it works!
Dave

Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it


...oh, and a 2006 Freelander destined for the jungles of The Gambia - 4500 miles across roads, desert and tracks - what could possibly go wrong?
User avatar
dapinky
LEC Administrator
 
Posts: 10605
Joined: Sun 15.10.2006, 12:54
Location: As far west as you can get in West Wales before you become Irish (Pembroke Dock).

Re: Air Intake

Postby tigerdog » Sat 16.05.2015, 17:19

LGM came up with a foam sleeve that worked a treat, several years ago. I bought one from her at the time, prophylactically, but so far, Smaug's intake is holding up despite its age.
"Refitting is the reverse sequence to removal, but you swear in different places."
User avatar
tigerdog
God
 
Posts: 2712
Joined: Tue 20.03.2007, 09:07
Location: San Diego, CA, USA


Return to Turbos, Boost, and Intakes

Who is online

Users browsing this forum: No registered users and 1 guest