Ignition key blanks

Post here if your topic fits no other thread in this category.

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Ignition key blanks

Postby Megwenda » Wed 24.09.2014, 15:13

Hi

I have been trying locally to get the dw04rap key blank for the ignition with no luck.
I have also tried on the net, but they seem to want more than 30usd shipping charges (and on top of that I will have to pay swiss import and admin fees, so the 2 keys would cost about £70)

Anybody know of a source in the UK?

If possible, I would prefer the blade type, as I am fitting a remote from www.jom.de to the central locking system, and the fob can take a key blade m.jom.de/item/31303930

Regards
Dave
User avatar
Megwenda
Enthusiast
 
Posts: 201
Joined: Thu 07.02.2013, 11:51
Location: Switzerland

Re: Ignition key blanks

Postby rip » Wed 24.09.2014, 17:02

Hi Dave,

The ignition keys were standard GM keys here in the UK but I am not sure if they are still easily available.
I am not sure if there were slight variations either. A picture may be helpful to match it up.

When I had some boot/trunk keys cut, they were a US only blank & many outlets will only cut keys they provide so getting them cut was not straightforward.
1990 SE
User avatar
rip
God
 
Posts: 5904
Joined: Sun 08.04.2007, 07:48
Location: Milton Keynes, UK

Re: Ignition key blanks

Postby dapinky » Wed 24.09.2014, 17:43

Hi Dave,

I was looking at these a month ago when I was sorting my alarm system/spare keys out.....

..... but gave up when I saw that they were.....















about £2 each :lol:




Have a look here You'll need to click the GM logo, and then there are other options - the YM28 on the right is the one you need (well, it says it's for a Lotus, and looked right to me!)
Dave

Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it


...oh, and a 2006 Freelander destined for the jungles of The Gambia - 4500 miles across roads, desert and tracks - what could possibly go wrong?
User avatar
dapinky
LEC Administrator
 
Posts: 10605
Joined: Sun 15.10.2006, 12:54
Location: As far west as you can get in West Wales before you become Irish (Pembroke Dock).

Re: Ignition key blanks

Postby Fredjohn » Wed 24.09.2014, 18:08

:goodposting: :clap:


And I presume that key YM27 is the glovebox???

Can you put this link into Wiki??
La vie passe vite: vivez la avec élan.

Elan SE turbo 1992
Emira 2023
Mercedes Benz C200 estate
Lotus Evija Danish edition
User avatar
Fredjohn
God
 
Posts: 2537
Joined: Tue 21.08.2012, 00:30
Location: Malvern, Worcs

Re: Ignition key blanks

Postby Megwenda » Wed 24.09.2014, 18:26

Hi Dave

Thanks... I checked the specs for the two blanks (dw04rap and ym28), and they match up.. the ym28 may be a tad thicker, however with a 20 year old lock, this is not going to make any difference. Proof of the pudding will be when I cut them :D I will post here what my experience is.

Also, they were only £1.95 each, and the shipping was £2.40.

I ordered three straight away, (one to practice on)

mfG
Dave
User avatar
Megwenda
Enthusiast
 
Posts: 201
Joined: Thu 07.02.2013, 11:51
Location: Switzerland

Re: Ignition key blanks

Postby dapinky » Wed 24.09.2014, 18:26

Fredjohn wrote:Can you put this link into Wiki??


I suppose I could........

...... but so could YOU!
Dave

Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it


...oh, and a 2006 Freelander destined for the jungles of The Gambia - 4500 miles across roads, desert and tracks - what could possibly go wrong?
User avatar
dapinky
LEC Administrator
 
Posts: 10605
Joined: Sun 15.10.2006, 12:54
Location: As far west as you can get in West Wales before you become Irish (Pembroke Dock).

Re: Ignition key blanks

Postby dapinky » Wed 24.09.2014, 22:52

Now in the wiki :roll:
Dave

Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it


...oh, and a 2006 Freelander destined for the jungles of The Gambia - 4500 miles across roads, desert and tracks - what could possibly go wrong?
User avatar
dapinky
LEC Administrator
 
Posts: 10605
Joined: Sun 15.10.2006, 12:54
Location: As far west as you can get in West Wales before you become Irish (Pembroke Dock).

Re: Ignition key blanks

Postby epipete » Sat 01.08.2015, 15:01

Managed to get two ignition keys cut for my Élan at Timpson (Taunton Branch) today along with the last of their Boot Key.

I shall still need to check that they work but codes are:

Ignition: JMA OP DP
Boot: Ilco S1098H B45
You know more than you think you know, just as you know less than you want to know. ... Oscar Wilde
User avatar
epipete
God
 
Posts: 2415
Joined: Wed 17.08.2011, 11:03
Location: Chippenham

Re: Ignition key blanks

Postby ragtime » Sun 02.08.2015, 21:35

epipete wrote:Managed to get two ignition keys cut for my Élan at Timpson (Taunton Branch) today along with the last of their Boot Key.

I shall still need to check that they work but codes are:

Ignition: JMA OP DP
Boot: Ilco S1098H B45






Pete, I got spare from the little shop in Sheldon Road, YM 28P (Vauxhall GM) and boot key but cant remember that code
ragtime
Newbie
 
Posts: 7
Joined: Fri 15.08.2014, 21:55
Location: wilts

Re: Ignition key blanks

Postby epipete » Sun 02.08.2015, 22:03

Tested the keys that I bought (referred above) and they are sound. Rather nice to have a couple of spares for the first time!

Sheldon Road? Where are you? :bowdown:
You know more than you think you know, just as you know less than you want to know. ... Oscar Wilde
User avatar
epipete
God
 
Posts: 2415
Joined: Wed 17.08.2011, 11:03
Location: Chippenham

Re: Ignition key blanks

Postby ragtime » Sun 02.08.2015, 22:08

epipete wrote:Tested the keys that I bought (referred above) and they are sound. Rather nice to have a couple of spares for the first time!

Sheldon Road? Where are you? :bowdown:






im also in chippenham :)
ragtime
Newbie
 
Posts: 7
Joined: Fri 15.08.2014, 21:55
Location: wilts

Re: Ignition key blanks

Postby Tuga2112 » Sun 02.08.2015, 22:15

epipete wrote:Managed to get two ignition keys cut for my Élan at Timpson (Taunton Branch) today along with the last of their Boot Key.

I shall still need to check that they work but codes are:

Ignition: JMA OP DP
Boot: Ilco S1098H B45


thanks pete, I have got my spare ignition from JMA too, ill check the llco one with my local tipson soon
Still learning
Youtube Channel @Tuga2112 M100 repair videos
User avatar
Tuga2112
God
 
Posts: 3039
Joined: Fri 12.09.2014, 22:54
Location: Durham with a regular trip to Walsall

Re: Ignition key blanks

Postby mitreklov » Mon 03.08.2015, 07:20

In-between Elans right now
User avatar
mitreklov
Enthusiast
 
Posts: 181
Joined: Mon 24.06.2013, 20:30
Location: Uckfield, East Sussex


Return to General

Who is online

Users browsing this forum: No registered users and 3 guests