Front spoiler rubber lip

[Simon_P]

OK - I've re established contact with the self-isolating one and we are good to go.

The offer is:
a. Rubber lip (£TBA including a donation to LEC Kitty)
b. Rubber lip with the holes cut in the correct place +£5

Optional stainless screws and the correct size washers £TBA was about £7 ten years ago but the supplier I use is closed so will have to find another supplier
I am also trying to get the correct size nuts or an alternative TBA

Please make a note if you want the fasteners.

a. Rubber lip
1.
2.
3.
4.
5.
6.
7.

b.Rubber lip with holes
1.
2.
3.
4.
5.
6.
7.

[V8vroom]

Yep I need a new one as well and would happily join group buy

stay well everyone

[niall]

The offer is:
a. Rubber lip (£TBA including a donation to LEC Kitty)
b. Rubber lip with the holes cut in the correct place +£5

Optional stainless screws and the correct size washers £TBA was about £7 ten years ago but the supplier I use is closed so will have to find another supplier
I am also trying to get the correct size nuts or an alternative TBA

Please make a note if you want the fasteners.

a. Rubber lip
1.
2.
3.
4.
5.
6.
7.

b.Rubber lip with holes
1. Niall (with fasteners)
2.
3.
4.
5.
6.
7.

[V8vroom]

The offer is:
a. Rubber lip (£TBA including a donation to LEC Kitty)
b. Rubber lip with the holes cut in the correct place +£5

Optional stainless screws and the correct size washers £TBA was about £7 ten years ago but the supplier I use is closed so will have to find another supplier
I am also trying to get the correct size nuts or an alternative TBA

Please make a note if you want the fasteners.

a. Rubber lip
1.
2.
3.
4.
5.
6.
7.

b.Rubber lip with holes
1. Niall (with fasteners)
2. Rupert (with fasteners please)
3.
4.
5.
6.
7.

[NewLogik]

a. Rubber lip (£TBA including a donation to LEC Kitty)
b. Rubber lip with the holes cut in the correct place +£5

Optional stainless screws and the correct size washers £TBA was about £7 ten years ago but the supplier I use is closed so will have to find another supplier
I am also trying to get the correct size nuts or an alternative TBA

Please make a note if you want the fasteners.

a. Rubber lip
1.
2.
3.
4.
5.
6.
7.

b.Rubber lip with holes
1. Niall (with fasteners)
2. Rupert (with fasteners please)
3. NewLogik (with fasterners)
4.
5.
6.
7.

[johnj]

a. Rubber lip (£TBA including a donation to LEC Kitty)
b. Rubber lip with the holes cut in the correct place +£5

Optional stainless screws and the correct size washers £TBA was about £7 ten years ago but the supplier I use is closed so will have to find another supplier
I am also trying to get the correct size nuts or an alternative TBA

Please make a note if you want the fasteners.

a. Rubber lip
1.
2.
3.
4.
5.
6.
7.

b.Rubber lip with holes
1. Niall (with fasteners)
2. Rupert (with fasteners please)
3. NewLogik (with fasterners)
4. johnj (with fasteners please)
5.
6.
7.

[Portugal_lotus]

a. Rubber lip (£TBA including a donation to LEC Kitty)
b. Rubber lip with the holes cut in the correct place +£5

Optional stainless screws and the correct size washers £TBA was about £7 ten years ago but the supplier I use is closed so will have to find another supplier
I am also trying to get the correct size nuts or an alternative TBA

Please make a note if you want the fasteners.

a. Rubber lip
1.
2.
3.
4.
5.
6.
7.

b.Rubber lip with holes
1. Niall (with fasteners)
2. Rupert (with fasteners please)
3. NewLogik (with fasterners)
4. johnj (with fasteners please)
5. Portugal_lotus (with fasteners please)
6.
7.

[Denny]

a. Rubber lip (£TBA including a donation to LEC Kitty)
b. Rubber lip with the holes cut in the correct place +£5

Optional stainless screws and the correct size washers £TBA was about £7 ten years ago but the supplier I use is closed so will have to find another supplier
I am also trying to get the correct size nuts or an alternative TBA

Please make a note if you want the fasteners.

a. Rubber lip
1.
2.
3.
4.
5.
6.
7.

b.Rubber lip with holes
1. Niall (with fasteners)
2. Rupert (with fasteners please)
3. NewLogik (with fasterners)
4. johnj (with fasteners please)
5. Portugal_lotus (with fasteners please)
6. Denny (with fasteners please)
7.

[GeoffSmith]

a. Rubber lip (£TBA including a donation to LEC Kitty)
b. Rubber lip with the holes cut in the correct place +£5

Optional stainless screws and the correct size washers £TBA was about £7 ten years ago but the supplier I use is closed so will have to find another supplier
I am also trying to get the correct size nuts or an alternative TBA

Please make a note if you want the fasteners.

a. Rubber lip
1.
2.
3.
4.
5.
6.
7.

b.Rubber lip with holes
1. Niall (with fasteners)
2. Rupert (with fasteners please)
3. NewLogik (with fasterners)
4. johnj (with fasteners please)
5. Portugal_lotus (with fasteners please)
6. Denny (with fasteners please)
7. Geoff

[Simon_P]

Hi All,

I'm waiting for various deliveries which are imminent. Suppliers are all closed or part time and there is a fairly standard week or two delivery at the moment - It gets here when it gets here!
The good news is that for Group Buyers It looks like we can hold Malvern 2013 prices:
£20 without holes
£25 with Holes
£7 for screws and washers.

The indifferent news is that I am still waiting for quotes for the U nuts.

The bad news is that Hermes have just put their prices up and postage is going to be around the £5 mark

[NewLogik]

Hi All,

I'm waiting for various deliveries which are imminent. Suppliers are all closed or part time and there is a fairly standard week or two delivery at the moment - It gets here when it gets here!
The good news is that for Group Buyers It looks like we can hold Malvern 2013 prices:
£20 without holes
£25 with Holes
£7 for screws and washers.

The indifferent news is that I am still waiting for quotes for the U nuts.

The bad news is that Hermes have just put their prices up and postage is going to be around the £5 mark

Thank you for the update !

[Simon_P]

They arrived yesterday - I'll try and get to it today and post later.

[Tuga2112]

a. Rubber lip (£TBA including a donation to LEC Kitty)
b. Rubber lip with the holes cut in the correct place +£5

Optional stainless screws and the correct size washers £TBA was about £7 ten years ago but the supplier I use is closed so will have to find another supplier
I am also trying to get the correct size nuts or an alternative TBA

Please make a note if you want the fasteners.

a. Rubber lip
1. Tuga2112
2. Tuga2112
3.
4.
5.
6.
7.

b.Rubber lip with holes
1. Niall (with fasteners)
2. Rupert (with fasteners please)
3. NewLogik (with fasterners)
4. johnj (with fasteners please)
5. Portugal_lotus (with fasteners please)
6. Denny (with fasteners please)
7. Geoff

[Fredjohn]

a. Rubber lip (£TBA including a donation to LEC Kitty)
b. Rubber lip with the holes cut in the correct place +£5

Optional stainless screws and the correct size washers £TBA was about £7 ten years ago but the supplier I use is closed so will have to find another supplier
I am also trying to get the correct size nuts or an alternative TBA

Please make a note if you want the fasteners.

a. Rubber lip
1. Tuga2112
2. Tuga2112
3.
4.
5.
6.
7.

b.Rubber lip with holes
1. Niall (with fasteners)
2. Rupert (with fasteners please)
3. NewLogik (with fasterners)
4. johnj (with fasteners please)
5. Portugal_lotus (with fasteners please)
6. Denny (with fasteners please)
7. Geoff
8. Fredjohn

PS Just to confirm, I have 17 holes, some of which are slots??

[Fredjohn]

Yep I need a new one as well and would happily join group buy

stay well everyone

Copy the latest list, start a new reply, paste in the list then add your name to the relevant list a or b as required.

Stay safe V8vroom.

[sheriff464]

a. Rubber lip (£TBA including a donation to LEC Kitty)
b. Rubber lip with the holes cut in the correct place +£5

Optional stainless screws and the correct size washers £TBA was about £7 ten years ago but the supplier I use is closed so will have to find another supplier
I am also trying to get the correct size nuts or an alternative TBA

Please make a note if you want the fasteners.

a. Rubber lip
1. Tuga2112
2. Tuga2112
3.
4.
5.
6.
7.

b.Rubber lip with holes
1. Niall (with fasteners)
2. Rupert (with fasteners please)
3. NewLogik (with fasterners)
4. johnj (with fasteners please)
5. Portugal_lotus (with fasteners please)
6. Denny (with fasteners please)
7. Geoff
8. Fredjohn
9. Sheriff464.( Just one set of stainless fasteners please, if that would be possible?).
PS Just to confirm, I have 17 holes, some of which are slots??

[Joe Roberts]

I'm after the rubber front spoiler lip please as well if its not too late??

[Simon_P]

No not too late I'm cutting the holes now (inbetween putting a gutter up). Please add your name to the list with the appropriate options.

I'll contact people tomorrow.

[sheriff464]

a. Rubber lip (£TBA including a donation to LEC Kitty)
b. Rubber lip with the holes cut in the correct place +£5

Optional stainless screws and the correct size washers £TBA was about £7 ten years ago but the supplier I use is closed so will have to find another supplier
I am also trying to get the correct size nuts or an alternative TBA

Please make a note if you want the fasteners.

a. Rubber lip
1. Tuga2112
2. Tuga2112
3.
4.
5.
6.
7.

b.Rubber lip with holes
1. Niall (with fasteners)
2. Rupert (with fasteners please)
3. NewLogik (with fasterners)
4. johnj (with fasteners please)
5. Portugal_lotus (with fasteners please)
6. Denny (with fasteners please)
7. Geoff
8. Fredjohn
9. Sheriff464.( Just one set of stainless fasteners please, if that would be possible?).
PS Just to confirm, I have 17 holes, some of which are slots??

[Simon_P]

Well it has been a busy few weeks - thank you for your patience on this.

I have drawn a blank so far on the nuts, We need no 8 U nuts - The first delivery was No14 J nuts I guess the picker previously worked in a supermarket and though I had clicked "accept Alternates" the second delivery might be ok but it doesn't look like they are wide enough for our panel thickness. I will keep looking, but idf anyone is stuck Bresco do something that might work ( they are a different design but right panel thickness). In any event I will post an alternative/Repair method

PS Just to confirm, I have 17 holes, some of which are slots??

Yes, 17 holes four of which are slots. Some of the holes on the bumper are slots as well, then it depends where the nut is positioned and given that the rubber is very soft and it is an inexact science it is worth a few minutes to get it to sit right. interestingly the early manual says 15. I've not come across a car with 15 holes and the 3 in the middle at the front suggest that after they scraped it on a few speed bumps they added 2 more screws.

I think I have sent everyone a pm - It's late so if you haven't got a message let me know - If you want a rubber lip add your name to the list!

Remember that this includes a decent donation to the LEC Kitty, which keeps Dapinky well stocked with Teabags and consequently you well supplied with Tea..... when we do actually get to meet-up.