Digital Gauges - Both CANBUS and Original VIN

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Digital Gauges - Both CANBUS and Original VIN

Postby AJSGSE1990 » Wed 18.11.2026, 15:53

Managed to get these little touchscreen circular units off Waveshare along with a number of little other boards for regulated supply, canbus and more. They are about £30 each and are very easy to program via Arduino IDE.

The pictures here are running in SIM mode, standard Lotus, funs stuff, and backup clocks. I am also building a full digital dash which will run on an RPi 5. They are good but can be temperamental so a backup for revs, speed, and temp/fuel is needed. By the way the car's speed still comes from the original dash as the ECU can take in the optical pulses from the unit at the back of the clocks.

There is no reason why you could not replace them on a standard car and use voltage tables to give you readings. I have those in the ECU if anyone needs them as I already calibrated the original gauges. If anyone want to use my code feel free to ask.

Next is to buy a resin 3D printer and make the VDO gauge surrounds.

111.jpeg

222.jpeg

333.jpeg

444.jpeg
User avatar
AJSGSE1990
Tinkerer
 
Posts: 98
Joined: Fri 16.01.2026, 15:16
Location: Great Saling, Essex, United Kingdom

Re: Digital Gauges - Both CANBUS and Original VIN

Postby AJSGSE1990 » Thu 19.11.2026, 10:55

Dash display permutations, selectable by single button.

This will probably be the "standard" screen, stays completely normal till Carplay sends Navigation commands and they appear above the temp/fuel

Screen1_nav_summary.png


Other selectable screens

Screen1_modes.png
User avatar
AJSGSE1990
Tinkerer
 
Posts: 98
Joined: Fri 16.01.2026, 15:16
Location: Great Saling, Essex, United Kingdom

Re: Digital Gauges - Both CANBUS and Original VIN

Postby DublinBlueElan » Thu 19.11.2026, 12:24

Wow, this is something that I'd love to be able to do. What screen are you using for the instrument cluster? Does it fit well or look like an add on? Where are the gauges getting their feed from? Are you tapping into the diagnostic port or pulling data from elsewhere?
1992 Aqua Blue se turbo
User avatar
DublinBlueElan
Newbie
 
Posts: 35
Joined: Fri 22.08.2025, 13:14
Location: Dublin Ireland

Re: Digital Gauges - Both CANBUS and Original VIN

Postby Tuga2112 » Thu 19.11.2026, 15:20

hes got a whole aftermarket ECU in hes car.

but hes not posting this in the same project thread :lol:
Still learning
Youtube Channel @Tuga2112 M100 repair videos
User avatar
Tuga2112
God
 
Posts: 3088
Joined: Fri 12.09.2014, 22:54
Location: Durham with a regular trip to Walsall


Return to Projects - Car (Major)

Who is online

Users browsing this forum: No registered users and 7 guests

cron