Alternator, waterpump, A/C, sensors, CAS, etc.
Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
by jib2222 » Tue 20.09.2005, 02:33
As I accelerate I don’t hear anything passing 3k but in every gear when I take my foot of the break and coast, once the tac hits 3,000 there is this loud squeal from under the hood. Any ideas what it is?
-
jib2222
- Newbie
-
- Posts: 41
- Joined: Wed 04.08.2004, 00:41
by Sy V » Tue 20.09.2005, 05:32
Turn everything electrical off and see if that stops/reduces it...if so, your alternator belt is too loose and needs adjusting.
Talk and song from tongues of lilting grace, sounds caress my ears but not a word I heard could I relay, the story was quite clear - Robert PlantIn Respectful Memory - 21st March 1959 - 14th February 2016
-

Sy V
- LEC Godfather
-
- Posts: 5794
- Joined: Mon 21.04.2003, 07:06
- Location: Lydiate Ash, Bromsgrove, Worcestershire.
by jib2222 » Tue 20.09.2005, 06:28
Everything was turned off and it was just as loud. Do you think it could still be the alternator? Could we safely say it is for sure a belt?
-
jib2222
- Newbie
-
- Posts: 41
- Joined: Wed 04.08.2004, 00:41
by Sy V » Tue 20.09.2005, 08:58
I still think it could be the alternator belt...does it get worse if you turn everything electrical on then? LOL.
I would never say for certain that any forum diagnosis was sound. But that's where I'd start.
Talk and song from tongues of lilting grace, sounds caress my ears but not a word I heard could I relay, the story was quite clear - Robert PlantIn Respectful Memory - 21st March 1959 - 14th February 2016
-

Sy V
- LEC Godfather
-
- Posts: 5794
- Joined: Mon 21.04.2003, 07:06
- Location: Lydiate Ash, Bromsgrove, Worcestershire.
by Monty » Tue 20.09.2005, 11:43
Could also be the PAS belt

-

Monty
- Chunder King!
-
- Posts: 7977
- Joined: Sun 11.01.2004, 22:32
- Location: Leeds
by Exbury » Tue 20.09.2005, 22:46
I had this and adjusted the altenator belt three times, only for it to return to squealling shortly after (as each adjustment took the best side of an hour (it aint 'alf tight in there!

)) this was a pain so I took the adjustment bolt out to see if I could replace the bolt (had thought it had stretched), only for the bracket to completely fall off.......yes, the bolts holding the bracket to the engine had worked loose!!! Repaired and it has not squealled since!
'Who is to know what is possible until one has attempted the impossible and suceeded'
-

Exbury
- Fanatic
-
- Posts: 291
- Joined: Tue 17.08.2004, 15:19
- Location: Welwyn Garden City
Return to Engine Ancillaries
Who is online
Users browsing this forum: No registered users and 4 guests