Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
by Paul S4 » Fri 23.03.2012, 01:08
This is my first post on here...!
I am new to 'modern' Lotus cars, but very familiar with the 'classic' Elan !
As per title...I am considering getting a 1991 M100 SE; it will need a cam belt service. Does anyone know/recommend a specialist in the Co. Durham/Teeside/Newcastle area. Also what sort of cost will this be ? Is there anything else that should be done at the same time as the cambelt? Thanks in advance.
-
Paul S4
- Newbie
-
- Posts: 2
- Joined: Sun 11.03.2012, 11:22
by Rice crispy » Tue 27.03.2012, 09:02
Can't help with the garage but everyone seems to do all the belts, and water pump as well. I had mine done a couple of years ago and got bits from SJ's and a mechanic friend who looks after his own exotics charged me about £250 iirc to do it all along with CAS seal, and full service (most of the parts I got).
David
-

Rice crispy
- God
-
- Posts: 1871
- Joined: Tue 16.06.2009, 11:48
- Location: brentwood essex
by abmunro » Tue 27.03.2012, 12:41
We have Formula One at Newcastle ( Expensive )
There is also Colin @ REVLINE whitley Bay ( Reasonable )
Cheers
Tony
91 Elan SE 24k miles, 270 BHP @ 1.25 barg. Roll hoops + fairings+ speed humps Elise lights. S2 alloys. Nitrons& Eibachs,AP's front & Hi Spec rear brakes
-

abmunro
- God
-
- Posts: 1726
- Joined: Wed 18.04.2007, 22:46
- Location: Chester-Le-Street, Co Durham.
by Rambo » Wed 28.03.2012, 07:49
Colin at REVLINE, Whitley Bay has an M100 himself so is well versed in the Elan
-

Rambo
- Don't push me
-
- Posts: 9144
- Joined: Wed 24.12.2003, 00:37
- Location: Both sides of the Tweed
by Fourdoorcat » Fri 30.03.2012, 00:29
Since the work required to replace the timing belt is rather significant, a couple of other things to consider replacing besides the accessory belts, water pump and CAS O-ring are:
Crankshaft seal
Camshaft seals
Cam cover gasket
Spark Plugs (possibly wires, depending on age)
"Bung" O-ring
Ken
"Never ascribe to malice that which can be perfectly explained by stupidity"
-

Fourdoorcat
- Enthusiast
-
- Posts: 131
- Joined: Thu 07.10.2010, 05:08
- Location: Rio Vista, California USA
by Paul S4 » Fri 30.03.2012, 01:08
Many thanks for all those replies. But what is a CAS seal?
-
Paul S4
- Newbie
-
- Posts: 2
- Joined: Sun 11.03.2012, 11:22
by tigerdog » Fri 30.03.2012, 05:30
Paul S4 wrote:Many thanks for all those replies. But what is a CAS seal?
It's the o-ring that keeps oil from seeping out from behind the Cam Angle Sensor (round black thingie where the distributor should be at the right-front of the engine.)
Clicky for replacements of a better material than stock.
"Refitting is the reverse sequence to removal, but you swear in different places."
-

tigerdog
- God
-
- Posts: 2712
- Joined: Tue 20.03.2007, 09:07
- Location: San Diego, CA, USA
by Aoki Magic Pants » Tue 03.04.2012, 14:59
Paul S4 wrote:Many thanks for all those replies. But what is a CAS seal?
Just out of interest; where do you live Paul?
-
Aoki Magic Pants
- Enthusiast
-
- Posts: 209
- Joined: Mon 04.05.2009, 17:57
- Location: Newcastle UK
Return to Engine
Who is online
Users browsing this forum: No registered users and 2 guests