can anyone check these out please

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

can anyone check these out please

Postby mickmick » Wed 10.01.2007, 18:04

if i get it right (and if i do thank you Geoff)

i'm asking as i'm not 100% happy with the car at the mo

the boost guage only goes to 0.5

i#m not sure if my throttle is set up right

my timing seems a little high

many more to add
You do not have the required permissions to view the files attached to this post.
now i have one, i just want to keep tinkering with it!!!!!!!
sorry mum :(
User avatar
mickmick
Fanatic
 
Posts: 382
Joined: Thu 19.05.2005, 04:38
Location: doncaster, the REAL god's county

Postby mickmick » Thu 11.01.2007, 18:51

27 views and not one reply yet

cmon people, help me out

even a rundown of what to look for would help
now i have one, i just want to keep tinkering with it!!!!!!!
sorry mum :(
User avatar
mickmick
Fanatic
 
Posts: 382
Joined: Thu 19.05.2005, 04:38
Location: doncaster, the REAL god's county

Postby Doug » Thu 11.01.2007, 21:36

it must be the avtar freaking people out ??
Image
User avatar
Doug
LEC Founder
 
Posts: 7468
Joined: Thu 17.04.2003, 06:43
Location: Oregon Coast, USA

Postby mickmick » Thu 11.01.2007, 22:28

ok ok, i'll change the avatar of me and the woman far too good for me



this any better?
now i have one, i just want to keep tinkering with it!!!!!!!
sorry mum :(
User avatar
mickmick
Fanatic
 
Posts: 382
Joined: Thu 19.05.2005, 04:38
Location: doncaster, the REAL god's county

Postby dapinky » Thu 11.01.2007, 23:08

I think you need to change your location aswell (either that, or learn proper Geography ;-) )

I mean......... since when was Doncaster in Warwickshire? :-D :-D :-D
Dave

Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it


...oh, and a 2006 Freelander destined for the jungles of The Gambia - 4500 miles across roads, desert and tracks - what could possibly go wrong?
User avatar
dapinky
LEC Administrator
 
Posts: 10606
Joined: Sun 15.10.2006, 12:54
Location: As far west as you can get in West Wales before you become Irish (Pembroke Dock).

Postby Doug » Thu 11.01.2007, 23:35

mickmick wrote:this any better?


:smt066
Image
User avatar
Doug
LEC Founder
 
Posts: 7468
Joined: Thu 17.04.2003, 06:43
Location: Oregon Coast, USA

Postby mickmick » Thu 11.01.2007, 23:57

cmon folks, this is meant to be helping me fix my car!!!!!!!



btw, location changed :lol: :lol: :twisted: :twisted: :lol: i wipe me arse on warwickshire
now i have one, i just want to keep tinkering with it!!!!!!!
sorry mum :(
User avatar
mickmick
Fanatic
 
Posts: 382
Joined: Thu 19.05.2005, 04:38
Location: doncaster, the REAL god's county

Postby GeoffSmith » Fri 12.01.2007, 00:19

mickmick wrote:warwickshire
Isn't that where that bloke who writes incomprehensible school plays comes from? :evil: Bart or someone! :twisted:




Mick,

I've had a quick look at your runs. I'm no expert on the interpretation side (John_W and ESM are the boys) but it looks like you're getting boost up to 0.6 or so - it could be your gauge is reading low. Your power does look a bit low but you weren't up to maximum revs and if there was any sort of upward incline, that would tend to decrease the numbers.

One question that should be asked is, have you set your base timing? Everything that the ECU does assumes that this is spot on. I've come across quite a few people who have had problems but the timing hadn't been set. If you haven't done it recently, it would be well worth checking, otherwise, can you let us know a bit more about what you think is wrong.

Sorry to have been so little help, but glad the interface is working! :-D

Geoff
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire

Postby ailwyn » Fri 12.01.2007, 03:59

geoffsmith wrote:it could be your gauge is reading low.


Don't go by the gauge, they are useless, mine shows a max out at .75 when in fact the ECU is seeing over .9

I agree with Geoff, you need to post more symptoms or suspicions and then the ES data can be analysed to prove or disprove a theory.

Also, get the base timing reset, remember to put the car in service mode first.

Ailwyn
ailwyn
Forum Member
 
Posts: 3361
Joined: Tue 09.08.2005, 20:45

Postby mickmick » Fri 12.01.2007, 11:43

ok,

i'm under the car today sorting out the front rubber lip (price is down to £13 inc VAT and postage now)

after that i'll have a read of what to do with the base timing, make sure i've got the tools to do it (and if i havent its charlie browns/halfrauds/ebay to get them)

set it right

do some more runs

and ask again

Cheers for the replies to the content of the ORIGIONAL thread

Mick
now i have one, i just want to keep tinkering with it!!!!!!!
sorry mum :(
User avatar
mickmick
Fanatic
 
Posts: 382
Joined: Thu 19.05.2005, 04:38
Location: doncaster, the REAL god's county

Postby Siegreen » Fri 12.01.2007, 15:34

dapinky wrote:I think you need to change your location aswell (either that, or learn proper Geography ;-) )

I mean......... since when was Doncaster in Warwickshire? :-D :-D :-D


OI.!!!!! :censored:

Theres more than one of us on here!!!
You hold him Mick an I'll kick him in the shins!! :-D :-D
I fart in your general direction! You mother was a hamster and your father smelt of elderberries!"

Azure Blue S2 No. 452
User avatar
Siegreen
Tinkerer
 
Posts: 58
Joined: Tue 06.09.2005, 19:14
Location: Gods country, Yorks

Postby GeoffSmith » Fri 12.01.2007, 18:29

Mick and Si, gun toting Southerners the pair of you! :-D
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire

Postby dapinky » Fri 12.01.2007, 19:56

And neither of you frighten me anyway!

God built Warwickshire first, then added other bits, hence its in the Midlands - simple Maths, really!

P.S. - I like it so much, I now live in Somerset! :roll:
Dave

Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it


...oh, and a 2006 Freelander destined for the jungles of The Gambia - 4500 miles across roads, desert and tracks - what could possibly go wrong?
User avatar
dapinky
LEC Administrator
 
Posts: 10606
Joined: Sun 15.10.2006, 12:54
Location: As far west as you can get in West Wales before you become Irish (Pembroke Dock).

Postby TheBard » Thu 29.03.2007, 19:19

God built Warwickshire first, then added other bits, hence its in the Midlands - simple Maths, really!

P.S. - I like it so much, I now live in Somerset! :roll:


I agree completely, and moved to Washington D.C.!!!

You can take the lad out of Warwickshire, but you can't take Warwickshire out of the lad!

Oh, and Mick, they look like scans, how'd you do them, if you find my earlier efforts, I did third gear runs at wide open throttle from almost stalling to red line. That gives a nice range to check over.

Cheers,
Ian
Ford Fiesta Mk2, VW Polo, Golf GTi, Lotus Elan, Honda Accord Coupe V6.

Calypso Red Cali #7683 - Bought at 29,000 miles, and sold at 75,000miles.
User avatar
TheBard
Fanatic
 
Posts: 652
Joined: Sun 16.01.2005, 05:22
Location: Washington D.C.

Postby ESM » Thu 12.04.2007, 21:07

I had a look and it looks like a stock setup running pretty well.

    No codes are set
    The CTS & MAT agree to within a degree or so at startup (well done for logging when cold, most people warm it up first)
    The boost reaches programmed levels of >0.6bar in the runs, (you need more revs to hit 0.65bar)
    Negligible knock
    The Baro reading is reasonable
    The power levels look believable and consistent with stock performance
    Normal voltage
It takes 43 muscles to frown and 17 to smile, but it doesn't take any to sit on your arse with a blank look on your face.

Click on my WWW link for information on chips and ElanScan.
User avatar
ESM
God
 
Posts: 2441
Joined: Thu 17.04.2003, 10:08

Postby mickmick » Fri 13.04.2007, 08:33

Cheers for looking at them ESM fella,

good to find out from the man that my car is running well, i know i have a slight issue with the boost guage as a day ago i did two runs, unfortunately without the lappy logged in, and on the way out i was getting 0.7 indicated boost, but on the way back i was getting 0.5 indicated.

Also did another paperclip test as i had a code 34(maybe, not sure about number but it was a MAP one) however that has not come back again, so maybe things are A ok

Mick
now i have one, i just want to keep tinkering with it!!!!!!!
sorry mum :(
User avatar
mickmick
Fanatic
 
Posts: 382
Joined: Thu 19.05.2005, 04:38
Location: doncaster, the REAL god's county

Postby Enright » Mon 23.07.2007, 22:05

After my PC went bang last week, I am now in possession of a new laptop.

So I thought I'd put it to good use and get an Elanscan run in, as I haven't had the facilities to do one for ages.

Anyway here goes. A few different conditions using the Closed Loop Elysium program. Full throttle acceleration in 3rd & 4th at one noteable point around 700s.

It seems a bit odd that it never exceeded 0.85bar boost and 165hp. No knocks either.

Anyone have any thoughts?
Striking fear into the hearts of duplicate posts everywhere...! :P

BCingU,
Neil ;-)
User avatar
Enright
Modificator
 
Posts: 4860
Joined: Sun 19.12.2004, 19:21
Location: Arnold, Nottingham, England


Return to ElanScan

Who is online

Users browsing this forum: No registered users and 4 guests