anyone got a spare pre-cat?

[stevo]

candles, can i still get that top bit from you?

[Sy V]

Steve<br><br>I think Candles is out of the country...do you want mine?  Drop me an IM with the address if you do.

[stevo]

done.

[grahamec]

And one for me please  ;D

[stevo]

now i have the top bit (cheers sy) i will take it to the exhaust bloke and see what he can do.

[Monty]

Stevo i may have to drop out of this, if Avonvilla (steve) exhaust system comes off, as it will come with a precat replacement   ::)

[stevo]

i have got the top bit now and the exhaust guys are looking at it over the next week or two. i will start a new thread when i get word back from them.

[Sy V]

...he forgot to add that he got the top bit from one of the few of us who have already paid a King's Ransom to have H&S built replacements!<br><br> >:(

[stevo]

:-*

[stevo]

can anyone post me pics of custom down pipes to give my exhaust guy ideas. i found one or to in the archive but im sure i have seen more.

[nitroman]

<br><br>

[Monty]

Now thats a nice bit of kit  ;D<br>

[Candles]

Lovely, but we want a new bit that gets rid of the BCB (big cast ba$tard).  Isn't that right Stevo?

[stevo]

v nice dave but we are after the full bifta turbo back straight through shiny mofo.

[stevo]

just an update on this project.....<br><br>i went to see the guy today with some pics of previous down pipes. the plan is to make up one for a test fit and dyno run in missy and then make a jig to produce more from. <br><br>it will be a direct replacement for.....<br><br>A100E6025S pre cat housing<br>A100E6016S waste gate manifold<br><br>these 3 pieces form the down pipe a.k.a big cast bastard. so thats stainless from the turbo to the triangular joint undet the sump which i gather is where most aftermarket systems start. the pipe will be one piece and the top flange will be ported out to make one opening not 2 like the restrictive one we have just now.<br><br>the prototype will be ready in 3 weeks ish and a price will be haggled out for the first run. so far i think it will cost between £150 and £200.<br><br>so how is interested.......

[Monty]

Stevo,<br><br>Put me back on the list as a possible, as i was getting my Exhaust done by Blueflame and having the precat replaced for £425 but i`ve got a feeling that since Holty had his done by them and charged him £425 without the precat being replaced they might go back on there word. (i`ll have to ring them) so it`s possible i might get your part and fit it myself then let them do the rest of the exhaust ???<br><br>ps keep Dico on there, as he`s collecting a nice display of parts on his shelf

[Paul.P]

Stevo, i am certainly interested !

[Candles]

Me me me me me!  One day when my engine runs right, I'll need this.  Also, why are you stopping at the triangular joint??  I want one that carries on with a flexi hose and goes further back!  I have a PM system and that doesn't start until  the ball joint thingy under the oil filter.  It is also squished over the cross member but that is another story.<br><br>Sign me up - money ready if that helps.<br><br>Candles.