Please put all your known Elan Cross-Refenced parts here--click "start new topic" and title it with the part type, then add all known info to the post.
Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
by M100 TWO » Wed 13.07.2005, 12:36
taken from Lotus Drivers Club mag- Lock mechanism fitted to the Daewoo Nubira is the same as the Elan
near side part no D96305411
off side part no D96305422
about £35 each
-

M100 TWO
- God
-
- Posts: 926
- Joined: Thu 02.10.2003, 14:49
- Location: southampton
by Mark Crossley » Wed 07.06.2006, 21:41
Do you know if anyone has ever tried one of these? I have a 1992 UK spec SE Turbo and it looks like my near side lock machanism has totally siezed.
-
Mark Crossley
- Newbie
-
- Posts: 15
- Joined: Wed 07.06.2006, 21:34
- Location: UK
by philip_sloper » Sun 30.09.2007, 19:42
I bought the offside D96305422, now £58.00 plus VAT from Chevrolet dealers.
Regret to say that it is not a drop in replacement, although it is clearly based upon the same design there are substantial differences.
It might be possible to make it work, but would require quite a lot of modification.
-

philip_sloper
- Fanatic
-
- Posts: 405
- Joined: Sun 20.04.2003, 12:07
- Location: Nr Stourbridge, West Midlands
by GeoffSmith » Sun 30.09.2007, 20:27
Philip,
I was at a Vauxhall recycler last week and he swore they were parts out the GM bin. He said he could confirm exactly which model if he saw he internal configuration. If you have yours out, can identify any GM part numbers 90 XXX XXX or could you send me some photographs to show him?
Geoff
Calypso Red S2 #417
USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
-

GeoffSmith
- Kitty Fiddler
-
- Posts: 15628
- Joined: Fri 03.02.2006, 21:57
- Location: S2#417 in Tytherington, Gloucestershire
-
by John_W » Sun 30.09.2007, 20:49
Some pictures of lock barrels
here.
Or you could just bid for these.
John
-

John_W
- Heid-bummer
-
- Posts: 3780
- Joined: Mon 21.04.2003, 12:31
- Location: Aberdeen
-
by Specky » Sun 30.09.2007, 20:52
John_W wrote:Some pictures of lock barrels
here.Or you could just bid for these.
John
In true Jedi fashion "These aren't the door locks you're looking for"
TTFN
If you have a problem, if no one else can help, and if you can find them, maybe you can hire... The N/A-Team.
-

Specky
- Moderator
-
- Posts: 5982
- Joined: Sun 07.09.2003, 23:19
- Location: Swindon
by Gary » Sun 30.09.2007, 21:02
South West Lotus (I think) normaly sell LH & RH door locks for £10 a pair at Donny.
Only problem is they don't include the boot lock !
Ex owner of S2 no 480 and Red SE
-

Gary
- God
-
- Posts: 2284
- Joined: Thu 14.07.2005, 18:04
- Location: Rutland
by philip_sloper » Sun 30.09.2007, 22:08
John_W wrote:Some pictures of lock barrels
here.Or you could just bid for these.
John
The part we are talking about is replacement for Lotus part B100B0093F & B100B0094F.
This is a lock mechanism, not a barrel!
-

philip_sloper
- Fanatic
-
- Posts: 405
- Joined: Sun 20.04.2003, 12:07
- Location: Nr Stourbridge, West Midlands
by rip » Sun 30.09.2007, 22:08
I seem to have lost mine completely. I have blank doors.
You could always get yours blanked off too, then get a complete respray to finish the job off

1990 SE
-

rip
- God
-
- Posts: 5904
- Joined: Sun 08.04.2007, 07:48
- Location: Milton Keynes, UK
by John_W » Sun 30.09.2007, 23:03
Ah, the mechanism, not the lock barrels. Apologies for the wrong end of the stick.
John

-

John_W
- Heid-bummer
-
- Posts: 3780
- Joined: Mon 21.04.2003, 12:31
- Location: Aberdeen
-
by clan » Mon 01.10.2007, 20:50
John_W wrote:Some pictures of lock barrels
here.Or you could just bid for these.
John
On my elan, the passenger door lock has been forced with a screw driver at some point and it doesn't look to good. Are these the parts that I am looking for to replace it?
1992 SE - Monaco White - 64,000 miles and climbing.
White Is The New Black.
-

clan
- Enthusiast
-
- Posts: 116
- Joined: Fri 30.12.2005, 20:21
- Location: Dumbarton, Scotland.
by Specky » Tue 02.10.2007, 21:23
clan wrote:John_W wrote:Some pictures of lock barrels
here.Or you could just bid for these.
John
On my Elan, the passenger door lock has been forced with a screw driver at some point and it doesn't look to good. Are these the parts that I am looking for to replace it?
No....
Ok ....they might be....
ok...I admit it..... I'm the one whos winning the current bid
TTFN
If you have a problem, if no one else can help, and if you can find them, maybe you can hire... The N/A-Team.
-

Specky
- Moderator
-
- Posts: 5982
- Joined: Sun 07.09.2003, 23:19
- Location: Swindon
by Specky » Tue 02.10.2007, 21:28
Oh well...
outbid....
by the way they're only £15 from SWL...
but get your LEF 5% Discount even cheaper...
TTFN
If you have a problem, if no one else can help, and if you can find them, maybe you can hire... The N/A-Team.
-

Specky
- Moderator
-
- Posts: 5982
- Joined: Sun 07.09.2003, 23:19
- Location: Swindon
by clan » Wed 03.10.2007, 11:36
Specky wrote:Oh well...
outbid....
by the way they're only £15 from SWL...
but get your LEF 5% Discount even cheaper...
TTFN
I noticed that, do you only get one key with the new set?
1992 SE - Monaco White - 64,000 miles and climbing.
White Is The New Black.
-

clan
- Enthusiast
-
- Posts: 116
- Joined: Fri 30.12.2005, 20:21
- Location: Dumbarton, Scotland.
by Specky » Wed 03.10.2007, 19:56
clan wrote:Specky wrote:Oh well...
outbid....
by the way they're only £15 from SWL...
but get your LEF 5% Discount even cheaper...
TTFN
I noticed that, do you only get one key with the new set?
Yep!!!
If you have a problem, if no one else can help, and if you can find them, maybe you can hire... The N/A-Team.
-

Specky
- Moderator
-
- Posts: 5982
- Joined: Sun 07.09.2003, 23:19
- Location: Swindon
by philip_sloper » Wed 03.10.2007, 20:54
Specky wrote:clan wrote:Specky wrote:Oh well...
outbid....
by the way they're only £15 from SWL...
but get your LEF 5% Discount even cheaper...
TTFN
I noticed that, do you only get one key with the new set?
Yep!!!
Has anyone noticed that this thread is for part cross-references for lock mechanisms, not lock barrels? Can I suggest that you start another thread for parts cross-references for the barrels, and leave this thread to discuss the parts that it was originally intended for...
-

philip_sloper
- Fanatic
-
- Posts: 405
- Joined: Sun 20.04.2003, 12:07
- Location: Nr Stourbridge, West Midlands
by clan » Wed 03.10.2007, 22:20
philip_sloper wrote:Specky wrote:clan wrote:Specky wrote:Oh well...
outbid....
by the way they're only £15 from SWL...
but get your LEF 5% Discount even cheaper...
TTFN
I noticed that, do you only get one key with the new set?
Yep!!!
Has anyone noticed that this thread is for part cross-references for lock mechanisms, not lock barrels? Can I suggest that you start another thread for parts cross-references for the barrels, and leave this thread to discuss the parts that it was originally intended for...

Point taken
1992 SE - Monaco White - 64,000 miles and climbing.
White Is The New Black.
-

clan
- Enthusiast
-
- Posts: 116
- Joined: Fri 30.12.2005, 20:21
- Location: Dumbarton, Scotland.
by GeoffSmith » Wed 03.10.2007, 22:40
Philip,
Did you manage to find any GM numbers on the old mechanism?
Geoff
Calypso Red S2 #417
USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
-

GeoffSmith
- Kitty Fiddler
-
- Posts: 15628
- Joined: Fri 03.02.2006, 21:57
- Location: S2#417 in Tytherington, Gloucestershire
-
by philip_sloper » Sat 06.10.2007, 12:05
geoffsmith wrote:Philip,
I was at a Vauxhall recycler last week and he swore they were parts out the GM bin. He said he could confirm exactly which model if he saw he internal configuration. If you have yours out, can identify any GM part numbers 90 XXX XXX or could you send me some photographs to show him?
Geoff
Geoff
There is a silver sticker on the old mechanism with the numbers:
16607482
89
Handwritten between the 16607482 and the 89 are the numbers "194"
Stamped into the main metal plate is: V5984 and on the main plastic moulding: 6558-6
-

philip_sloper
- Fanatic
-
- Posts: 405
- Joined: Sun 20.04.2003, 12:07
- Location: Nr Stourbridge, West Midlands
by frog » Tue 13.11.2007, 00:52
Any news on the mechanism? Aparantly there is a small plastic bit in mine that is busted - so I don't even need the whole thing!
-
frog
- Newbie
-
- Posts: 44
- Joined: Thu 24.03.2005, 20:22
Return to Part Cross-Reference
Who is online
Users browsing this forum: No registered users and 3 guests