Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
by Martin R » Sun 18.11.2007, 19:39
Ive started the winter maintenance. It took me about 1.30 hours to remove the rusty screws from the front rubber skirt. Im going to replace them with new clips and 5mm hex headed S / S set screws. The rubber skirt is looking a bit past its best. Can you still buy them ? Also is a dealer the only source if you can. Ive had a search but cant find the information TIA.
2 Lotus and ones got to go

-
Martin R
- Enthusiast
-
- Posts: 128
- Joined: Sat 07.07.2007, 19:49
- Location: Birmingham
by clemo » Sun 18.11.2007, 19:45
walker rubbers sell them direct.. about £20 if i remember rightly
the crapy plastic bits have been known to be replaced with mechano strips..!!
Jim Clark S2 - 1/12. The one with the Yellow spoke wheels . No 613 on dash (pushed in to factory in wrong order 615 on tub)
-

clemo
- LEC Administrator
-
- Posts: 5069
- Joined: Mon 21.04.2003, 23:24
- Location: TORQUAY Devon. Cream first then Jam obviously.
by Martin R » Sun 18.11.2007, 19:52
2 Lotus and ones got to go

-
Martin R
- Enthusiast
-
- Posts: 128
- Joined: Sat 07.07.2007, 19:49
- Location: Birmingham
by clemo » Sun 18.11.2007, 19:55
thats the ones..
Jim Clark S2 - 1/12. The one with the Yellow spoke wheels . No 613 on dash (pushed in to factory in wrong order 615 on tub)
-

clemo
- LEC Administrator
-
- Posts: 5069
- Joined: Mon 21.04.2003, 23:24
- Location: TORQUAY Devon. Cream first then Jam obviously.
by DeeAitch » Sun 18.11.2007, 20:14
-

DeeAitch
- God
-
- Posts: 1773
- Joined: Fri 09.05.2003, 22:11
- Location: North East
by johnny » Mon 26.11.2007, 21:51
I did mine at work, hour & half.... not me, 4 hours, after two hours i was thinking, why did i start this
It was 20 pound, got mine from SJ. Comes all bent and white looking.
Once its on with a tin of back 2 black, looks good.
Hey- there's only on f in Geof Smith.. U crack me up. Poor old Dad..
-

johnny
- Fanatic
-
- Posts: 435
- Joined: Thu 19.10.2006, 21:01
- Location: Exeter, Devon
by Dico » Mon 26.11.2007, 22:00
4+ hours stuck in a damp bucket seat with a mad Irishman at the wheel - Deep joy!!!!
-

Dico
- Fool Boy Four - Founder
-
- Posts: 3569
- Joined: Mon 01.12.2003, 09:45
- Location: Moderator Manchester
by clemo » Mon 26.11.2007, 22:04
plus don't back to black it as it will just run off...
get a old cloth with thinners on it...
cleans up a beaut...
also do your tyres with thinners too.
much nicer than cockpit slime...
Jim Clark S2 - 1/12. The one with the Yellow spoke wheels . No 613 on dash (pushed in to factory in wrong order 615 on tub)
-

clemo
- LEC Administrator
-
- Posts: 5069
- Joined: Mon 21.04.2003, 23:24
- Location: TORQUAY Devon. Cream first then Jam obviously.
by GeoffSmith » Mon 26.11.2007, 22:10
Dico wrote:Its a bit cheaper if you buy direct from Walker rubbers. If you can find the link
One day, someone's going to have to teach you lot how to use the search facility!
CLICK
>>>HERE<<<
Calypso Red S2 #417
USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
-

GeoffSmith
- Kitty Fiddler
-
- Posts: 15628
- Joined: Fri 03.02.2006, 21:57
- Location: S2#417 in Tytherington, Gloucestershire
-
by clemo » Mon 26.11.2007, 22:32
geoff ..
i wish it was obvious..
was it lost on the old LECsite...
oh think ive found it ..
right
no thats not it
look here
look here
nope
try again
- Code: Select all
thats it ....[img]
wow i have just noticed if you hover the arrow over the stuff above it tells you what it does.. well sort of...
but i still dont understand it..
geoff???[/img]
will ask questions up on litrature..
if i cud speel it
Jim Clark S2 - 1/12. The one with the Yellow spoke wheels . No 613 on dash (pushed in to factory in wrong order 615 on tub)
-

clemo
- LEC Administrator
-
- Posts: 5069
- Joined: Mon 21.04.2003, 23:24
- Location: TORQUAY Devon. Cream first then Jam obviously.
Return to Hood/Top, Bodywork and Fittings
Who is online
Users browsing this forum: AhrefsBot and 4 guests