PECO exhaust noise

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

PECO exhaust noise

Postby Galsia » Mon 17.12.2007, 23:34

.
Last edited by Galsia on Fri 07.05.2010, 09:10, edited 1 time in total.
User avatar
Galsia
Enthusiast
 
Posts: 213
Joined: Thu 08.11.2007, 08:06
Location: Derby

Postby bunglin » Thu 10.01.2008, 17:44

Quite a bit louder - deeper and a bit grumbly - is niiiiice!!! :-D
bunglin
Enthusiast
 
Posts: 115
Joined: Mon 23.02.2004, 20:38

Postby Paul.P » Thu 10.01.2008, 18:44

bunglin wrote:Quite a bit louder - deeper and a bit grumbly - is niiiiice!!! :-D


Thats exactly as i would describe it, but i don't think its offensive !
JPS M100 was built from bare chassis up to create one off M100 in the mould of JPS Team Lotus
Paul.P
God
 
Posts: 4970
Joined: Sun 14.12.2003, 18:18
Location: Oakham, Rutland

Re: PECO exhaust noise

Postby Enright » Thu 10.01.2008, 19:57

Galsia wrote:This may sound like a strange question but how does the PECO exhaust sound compared to the standard one? Is it louder? More sporty?

If its not too much trouble, could someone with one fitted make a sound recording?

:D

It's like the difference between you humming and Pavarotti singing!
I think the Peco is much better fabricated and more discreet than mine, which you can hear with pleasure if you give me a yell.
It is a very nice system indeed - in fact I haven't seen better for the Elan, and an excellent price too.
Just make sure if you go for it that you get somewhere like Kwik Fit to do it for you. They can get the gas-axe on any stubborn nuts and bolts, and have all the kit for giving unlimited access to fit it properly. Well worth £40-50 rather than struggling yourself.
Striking fear into the hearts of duplicate posts everywhere...! :P

BCingU,
Neil ;-)
User avatar
Enright
Modificator
 
Posts: 4860
Joined: Sun 19.12.2004, 19:21
Location: Arnold, Nottingham, England

Re: PECO exhaust noise

Postby GeoffSmith » Thu 10.01.2008, 20:08

Enright wrote:Well worth £40-50 rather than struggling yourself.

:shock: £20 on a quiet Friday afternoon and NOT by the grease monkey. :D
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire

Postby AndyH » Thu 10.01.2008, 21:24

Just to repeat what I wrote in the original peco exhaust thread from '06:-

The noise is just fantastic! It's a satisfying purr on tickover or cruise, and a great roar on power application... juuuust under the noise level which would have people thinking a Vauxhall Nova with 59" wheels, tinted windows, and 10 grand of 'ice' was approaching - instead of one of Hethel's finest... :D
User avatar
AndyH
Enthusiast
 
Posts: 103
Joined: Mon 08.09.2003, 17:15
Location: Fairford

Postby Rambo » Thu 10.01.2008, 22:37

The PECO system gives the exhaust note a fantastic burbly resonance and on changedown or decelleration will pop, bang and fart nicely too. I think it makes the Elan sound like a proper sports car should (think more TVR sound than MGF and you'll get the drift) I've had mine since June '06 without any problems - £250 well spent IMO inc. free fitting ! They may be about £300 now though ?

If you can wait a couple of months you'll here a few PECO's revving up in the MOTO services area prior to the usual Donington convoy
User avatar
Rambo
Don't push me
 
Posts: 9144
Joined: Wed 24.12.2003, 00:37
Location: Both sides of the Tweed

Postby AndyH » Thu 10.01.2008, 22:49

of course.. I will have to dig out the brasso.. can't pitch up with an un-super-shiny tailpipe! 8)
User avatar
AndyH
Enthusiast
 
Posts: 103
Joined: Mon 08.09.2003, 17:15
Location: Fairford

Postby GeoffSmith » Thu 10.01.2008, 23:17

AndyH wrote:of course.. I will have to dig out the brasso.. can't pitch up with an un-super-shiny tailpipe! 8)


Nothing but the best stainless steel sink cleaner!
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire

Postby markv » Thu 10.01.2008, 23:58

Just a thought - does anyone have the technology to record the sound of the standard and Peco exhausts, so we can post them on LEC or WikiLEC?
Regards

Mark/.
User avatar
markv
God
 
Posts: 926
Joined: Sun 28.05.2006, 15:57
Location: Nottingham, UK

Postby Galsia » Thu 24.01.2008, 21:45

markv wrote:Just a thought - does anyone have the technology to record the sound of the standard and Peco exhausts, so we can post them on LEC or WikiLEC?


No takers?

:)
User avatar
Galsia
Enthusiast
 
Posts: 213
Joined: Thu 08.11.2007, 08:06
Location: Derby

Postby MattDon » Thu 24.01.2008, 22:56

ive got a peco waiting to go on, very exited now after reading all those comments. id be happy to record the peco when it goes on, ive also recorded the standard exhaust (with a few holes) so i can compare them. they will both be on video, (with an expensive mic attatched) but i will try to pull the sound off. oh and the peco is just over £300 delivered at the moment. and dave is a bloody nice chap.

couldnt convince the local ATS to fit it for me, so im gonna try a kwik-fit tomorrow, failing that i should be able to get it into a local garage next week.

standard exhaust - little leaky

peco fitted less that 100 mile ago
Last edited by MattDon on Tue 05.02.2008, 04:28, edited 2 times in total.
User avatar
MattDon
God
 
Posts: 858
Joined: Sat 29.09.2007, 21:38
Location: yorkshire

Postby paulwatkins » Fri 25.01.2008, 08:24

MattDon,
is this a very recently purchased Peco system?

Out of interest, did it come supplied with or without the inner (inside the oval) circular pipe?

Cheers, Paul
User avatar
paulwatkins
God
 
Posts: 1431
Joined: Thu 13.04.2006, 08:54
Location: WsM, UK

Postby MattDon » Fri 25.01.2008, 10:52

it was bought a couple of weeks ago, im not entirely sure what your asking, so i'll post a picture tonight, but inside the oval pipe there is a circular pipe recessed 6" or so down, which is welded to an oval insert. i imagine pics will be more use.
User avatar
MattDon
God
 
Posts: 858
Joined: Sat 29.09.2007, 21:38
Location: yorkshire

Postby paulwatkins » Fri 25.01.2008, 13:01

MattDon, my question was in relation to the screeching issue suffered by some members who have the Peco exhaust system.

SEE THIS THREAD

Peco's solution to this issue was to remove the inner circular pipe.

I was just wondering if Peco had now revised their design and were selling systems with the inner pipe removed or if they were still selling the system as previously constructed which may lead to screeching issues for some buyers.
User avatar
paulwatkins
God
 
Posts: 1431
Joined: Thu 13.04.2006, 08:54
Location: WsM, UK

Postby GeoffSmith » Fri 25.01.2008, 22:16

It sounds like the circular pipe is now recessed but a photograph would be good.
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire

Postby MattDon » Sat 26.01.2008, 14:46

ah i see now, yes the circular pipe is now recessed, right down to the oval metal plate.
User avatar
MattDon
God
 
Posts: 858
Joined: Sat 29.09.2007, 21:38
Location: yorkshire

Postby MattDon » Thu 31.01.2008, 18:14

just picked up my car with her new peco, its boarderline anti-social and i love it, im sure it will settle down soon, but wow! i'll get a video done asap, and i'll do another one when its settled down a bit too. If your after fuel economy dont get this, you just end up thrashing it just to hear the noise, or reving needlesly to see if you can make it cough and splutter. Also i did feel a difference, its picks up better, and i got a bit more wheel spin in second. :-D
User avatar
MattDon
God
 
Posts: 858
Joined: Sat 29.09.2007, 21:38
Location: yorkshire

Postby Monty » Thu 31.01.2008, 19:09

MattDon wrote:just picked up my car with her new peco, its boarderline anti-social and i love it, im sure it will settle down soon, but wow! i'll get a video done asap, and i'll do another one when its settled down a bit too. If your after fuel economy dont get this, you just end up thrashing it just to hear the noise, or reving needlesly to see if you can make it cough and splutter. Also i did feel a difference, its picks up better, and i got a bit more wheel spin in second. :-D


Thats cause your now running about 200bhp :lol:
Image
User avatar
Monty
Chunder King!
 
Posts: 7977
Joined: Sun 11.01.2004, 22:32
Location: Leeds

Postby MattDon » Fri 01.02.2008, 21:44

not yet im not, but it wont be long. :twisted:

2000rpm off throttle sounds awsome, lots of popping and crackling. but on throttle 2000rpm goes almost silent, certainly compared to the rest of the rev range.

although i did get the dredded boost creep at around 80 in third, which was interesting.
User avatar
MattDon
God
 
Posts: 858
Joined: Sat 29.09.2007, 21:38
Location: yorkshire

Next

Return to Exhaust

Who is online

Users browsing this forum: No registered users and 8 guests