Lotus Elan Central

Everything M100

Skip to content

Broken hood

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Post a reply

Broken hood

Postby Galsia » Fri 21.03.2008, 14:20

With a week to go until Dnnington I'm in a bit of a panic.

I went toput my hood down and heard a bolt fall out. I've looked everywhere and I can't find it.

Image

Image

Unfortunately its not just a case of putting another but and bolt in there because it appears to have been a special nut that is flush with the bar. A normal nut and bolt will catch.

How can I fix this? I can't put my roof down at the moment. :(
User avatar
Galsia
Enthusiast
 
Posts: 213
Joined: Thu 08.11.2007, 08:06
Location: Derby
Top

Postby Dico » Fri 21.03.2008, 14:25

Put a cable tie on it as a 'very' temporary measure :P
4+ hours stuck in a damp bucket seat with a mad Irishman at the wheel - Deep joy!!!!
User avatar
Dico
Fool Boy Four - Founder
 
Posts: 3569
Joined: Mon 01.12.2003, 09:45
Location: Moderator Manchester
Top

Re: Broken hood

Postby Galsia » Fri 21.03.2008, 14:26

Galsia wrote:With a week to go until Dnnington I'm in a bit of a panic.

I went to put my hood down and heard a bolt fall out. I've looked everywhere and I can't find it.

Image

Image

Unfortunately its not just a case of putting another nut and bolt in there because it appears to have been a special nut that is flush with the bar. A normal nut and bolt will catch.

How can I fix this? I can't put my roof down at the moment. :(
User avatar
Galsia
Enthusiast
 
Posts: 213
Joined: Thu 08.11.2007, 08:06
Location: Derby
Top

Postby Dico » Fri 21.03.2008, 14:28

Eh :? :lol:

Galsia wrote: Dnnington
Eh :? :lol:
4+ hours stuck in a damp bucket seat with a mad Irishman at the wheel - Deep joy!!!!
User avatar
Dico
Fool Boy Four - Founder
 
Posts: 3569
Joined: Mon 01.12.2003, 09:45
Location: Moderator Manchester
Top

Postby paza1 » Fri 21.03.2008, 14:32

I am not sure what that bolt part number is but you could try SJ Sportscars http://www.sjsportscars.co.uk/partsandaccessories/parts.asp
Type in hood and several bolts are listed. They may be open on Tuesday.
May be worth a go if no one else can help in the meanwhile.
Good luck
Mark
Silver 1992 SE Turbo.
paza1
Fanatic
 
Posts: 687
Joined: Thu 09.06.2005, 22:46
Location: Chester
Top

Postby Dico » Fri 21.03.2008, 14:37

A button head screw should do it. Bet you can pick one up from Donny, or even one of the Geordie comics?
I think everyone should check theirs as its a common problem.
4+ hours stuck in a damp bucket seat with a mad Irishman at the wheel - Deep joy!!!!
User avatar
Dico
Fool Boy Four - Founder
 
Posts: 3569
Joined: Mon 01.12.2003, 09:45
Location: Moderator Manchester
Top

Postby Galsia » Fri 21.03.2008, 15:57

Dico wrote:A button head screw should do it. Bet you can pick one up from Donny, or even one of the Geordie comics?
I think everyone should check theirs as its a common problem.



Geordie comics?

Yeah it does look like a button screw. What stops it from coming out of the other end though? There isn't a nut on the other side...
User avatar
Galsia
Enthusiast
 
Posts: 213
Joined: Thu 08.11.2007, 08:06
Location: Derby
Top

Postby Dico » Fri 21.03.2008, 16:02

Maybe one of the bars is threaded or has a captive nut? I can't remember, its been a while since I tightened mine up (caught it early ;-) ).

Geordie comics = Chief moderator Geoffsmith and King of bling Deaitch (?) aka shortshift Dave as me and Murph refer to him.
They like nuts and bolts.
4+ hours stuck in a damp bucket seat with a mad Irishman at the wheel - Deep joy!!!!
User avatar
Dico
Fool Boy Four - Founder
 
Posts: 3569
Joined: Mon 01.12.2003, 09:45
Location: Moderator Manchester
Top

Postby Sy V » Fri 21.03.2008, 16:58

Look here for my post 3 Feb 08 and the follow up from Surferphil...
Image

Talk and song from tongues of lilting grace, sounds caress my ears but not a word I heard could I relay, the story was quite clear - Robert Plant

In Respectful Memory - 21st March 1959 - 14th February 2016
User avatar
Sy V
LEC Godfather
 
Posts: 5794
Joined: Mon 21.04.2003, 07:06
Location: Lydiate Ash, Bromsgrove, Worcestershire.
Top

Postby Galsia » Fri 21.03.2008, 20:15

As a quick fix I've used a couple of cable ties. I'll send surferphil a PM.
User avatar
Galsia
Enthusiast
 
Posts: 213
Joined: Thu 08.11.2007, 08:06
Location: Derby
Top

Postby chris.t » Fri 21.03.2008, 20:57

as a word of warning to everyone, you will start to hear new creaks from the hood when these nuts start to come loose. Thats the time to open up your Elan tool kit and tighten up the bolts with the allen key supplied.
Could the 'Hokey-Cokey' actually be what it's all about?
User avatar
chris.t
God
 
Posts: 3671
Joined: Mon 11.07.2005, 09:56
Location: Storrington, West Sussex
Top

Postby paulrwebster » Fri 21.03.2008, 21:47

Look here for the 11p solution.
http://lotuselancentral.com/forum/viewt ... highlight=
Image

499 Rubbish posts, Always a fanatic, never a God.
User avatar
paulrwebster
Fanatic
 
Posts: 527
Joined: Sat 28.01.2006, 18:15
Location: Haywards Heath, West Sussex
Top

Postby GeoffSmith » Fri 21.03.2008, 21:50

Dico wrote:nuts and bolts

Or Dico and Monty as Mr. Itch and I call them. :-D
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire
Top

Postby Monty » Sat 22.03.2008, 00:00

GeoffSmith wrote:
Dico wrote:nuts and bolts

Or Dico and Monty as Mr. Itch and I call them. :-D


But which ones Nuts :smt119 :smt110 :smt120 :smt104
Image
User avatar
Monty
Chunder King!
 
Posts: 7977
Joined: Sun 11.01.2004, 22:32
Location: Leeds
Top

Postby surfboardfiller » Tue 25.03.2008, 22:03

Is it one of these?

Check it's not on the hood spring. I bought a car and the hood was wonky. Until I found a bolt wedged into the spring. :wink:
You do not have the required permissions to view the files attached to this post.
User avatar
surfboardfiller
God
 
Posts: 2857
Joined: Sat 22.10.2005, 14:08
Location: Somerset - England
Top

Postby Gary » Tue 25.03.2008, 22:34

chris.t wrote:as a word of warning to everyone, you will start to hear new creaks from the hood when these nuts start to come loose. Thats the time to open up your Elan tool kit and tighten up the bolts with the allen key supplied.


Yes as PaulP can witness it is a bit embarrasing when it starts to p*ss down , you go to put your hood up and it all goes limp !
Ex owner of S2 no 480 and Red SE
User avatar
Gary
God
 
Posts: 2284
Joined: Thu 14.07.2005, 18:04
Location: Rutland
Top

Postby Galsia » Tue 25.03.2008, 22:50

Gary wrote:
chris.t wrote:as a word of warning to everyone, you will start to hear new creaks from the hood when these nuts start to come loose. Thats the time to open up your Elan tool kit and tighten up the bolts with the allen key supplied.


Yes as PaulP can witness it is a bit embarrasing when it starts to p*ss down , you go to put your hood up and it all goes limp !


Yeah that happened to me. It also broke one of my B-post caps off but I think it can be glued back on.
User avatar
Galsia
Enthusiast
 
Posts: 213
Joined: Thu 08.11.2007, 08:06
Location: Derby
Top
Post a reply

Return to Hood/Top, Bodywork and Fittings

Who is online

Users browsing this forum: AhrefsBot, SemrushBot and 2 guests

© 1998 – 2026 Lotus Elan Central. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group
cron