Leads, coils, plugs, starters, starting probs etc.
Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
by GeoffSmith » Sun 08.02.2009, 12:26
Martin, is it an S2? If so, it's most likely your O2 sensor otherwise I'd suspect a leaky injector.
Calypso Red S2 #417
USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
-

GeoffSmith
- Kitty Fiddler
-
- Posts: 15628
- Joined: Fri 03.02.2006, 21:57
- Location: S2#417 in Tytherington, Gloucestershire
-
by Specky » Sun 08.02.2009, 12:50
GeoffSmith wrote:Martin, is it an S2? If so, it's most likely your O2 sensor otherwise I'd suspect a leaky injector.
It's an S2.... and it's Liz's...
TTFN
If you have a problem, if no one else can help, and if you can find them, maybe you can hire... The N/A-Team.
-

Specky
- Moderator
-
- Posts: 5982
- Joined: Sun 07.09.2003, 23:19
- Location: Swindon
by GeoffSmith » Sun 08.02.2009, 12:56
Bet it's the O2 sensor then... ElanScan will confirm.
Calypso Red S2 #417
USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
-

GeoffSmith
- Kitty Fiddler
-
- Posts: 15628
- Joined: Fri 03.02.2006, 21:57
- Location: S2#417 in Tytherington, Gloucestershire
-
by Martin R » Sun 08.02.2009, 18:11
That then begs the question could anyone close to me do one ? In exchange for beer tokens of course

2 Lotus and ones got to go

-
Martin R
- Enthusiast
-
- Posts: 128
- Joined: Sat 07.07.2007, 19:49
- Location: Birmingham
by Martin R » Tue 10.02.2009, 20:48
Could someone help me out with this please. i will gladly pay for their time and effort. I really need to sort this as im getting made redundant next week. The Elise is virtually sold and either Liz or i need to use the Elan as a daily driver. there is absolutly no work about even for skilled men as i am finding out unfortunatly. I would gladly take it to someone but its undrivable at the moment

2 Lotus and ones got to go

-
Martin R
- Enthusiast
-
- Posts: 128
- Joined: Sat 07.07.2007, 19:49
- Location: Birmingham
by niall » Tue 10.02.2009, 21:11
Hi Martin,
I am in Worcestershire and have a USB interface for Elanscan but no laptop loaded with Elanscan. If you have the latter and would like to borrow the interface, you are very welcome. That should enable you to diagnose the problem.
-

niall
- Fanatic
-
- Posts: 431
- Joined: Tue 26.08.2003, 22:16
- Location: Ardfern
by theelanman » Tue 10.02.2009, 21:17
Martin R wrote:im getting made redundant next week. there is absolutly no work about even for skilled men as i am finding out unfortunatly.
Martin
sorry to hear about the job...guess its yet another sign of the times....
Ive been sat doing not for nearly six months and not found anything yet....
I do hope it all starts to pick up very soon.....if it doesnt Im off to Oz for a bit I think...better than the other option of kazahkstan
good luck with your job hunting
cheers
G
I’m normally not a praying man, but if you’re up there, please save me, Superman.
-

theelanman
- Moderator
-
- Posts: 7296
- Joined: Fri 30.04.2004, 15:52
- Location: peak district
-
by Martin R » Tue 10.02.2009, 21:36
Gareth, its the second time for me. Automotive manufacturing is a bloody nightmare now. In fact any manufacturing industry is in this country. I would fix Elans for a living but i would starve to death

2 Lotus and ones got to go

-
Martin R
- Enthusiast
-
- Posts: 128
- Joined: Sat 07.07.2007, 19:49
- Location: Birmingham
by Martin R » Tue 10.02.2009, 21:37
niall wrote:Hi Martin,
I am in Worcestershire and have a USB interface for Elanscan but no laptop loaded with Elanscan. If you have the latter and would like to borrow the interface, you are very welcome. That should enable you to diagnose the problem.
Thanks for the offer but ive not got the software either.
2 Lotus and ones got to go

-
Martin R
- Enthusiast
-
- Posts: 128
- Joined: Sat 07.07.2007, 19:49
- Location: Birmingham
by niall » Tue 10.02.2009, 21:44
I believe you can download the software here. All you need is a PC or Laptop within cable's range of your car.
-

niall
- Fanatic
-
- Posts: 431
- Joined: Tue 26.08.2003, 22:16
- Location: Ardfern
by ailwyn » Tue 10.02.2009, 22:03
Martin,
O2 sensors have been bought from the US, RockAuto IIRC, some have purchased individually or there was a cambelt group buy a (fairly long) while ago sorted by Hegg... if you can find that thread the part number is on there.
I would start working on removing the old one now though.. it's an absolute bitch to remove.
Ailwyn
-
ailwyn
- Forum Member
-
- Posts: 3361
- Joined: Tue 09.08.2005, 20:45
by Martin R » Tue 10.02.2009, 22:25
niall wrote:I believe you can download the software here. All you need is a PC or Laptop within cable's range of your car.
Super, ive found it. I will try and download it to the laptop tomorrow. I may well be in touch shortly

2 Lotus and ones got to go

-
Martin R
- Enthusiast
-
- Posts: 128
- Joined: Sat 07.07.2007, 19:49
- Location: Birmingham
by Monty » Wed 11.02.2009, 00:50
Martin R wrote:Could someone help me out with this please. i will gladly pay for their time and effort. I really need to sort this as im getting made redundant next week. The Elise is virtually sold and either Liz or i need to use the Elan as a daily driver. there is absolutly no work about even for skilled men as i am finding out unfortunatly. I would gladly take it to someone but its undrivable at the moment

Martin, Sorry to hear that your being made redundant and fingers crossed and just hope things pick up soon.
I can`t really help on the Elan front but i`m sure the lads will get her help get her back running again.
-

Monty
- Chunder King!
-
- Posts: 7977
- Joined: Sun 11.01.2004, 22:32
- Location: Leeds
by Martin R » Wed 11.02.2009, 19:14
Right ho then. Ive found a laptop with a serial port i can use and put Elanscan on it. Niall ive have sent you a message in regards to the interface lead. I must say Elanscan looks mighty impressive a should give a few clues. Any tips before it try it ?
2 Lotus and ones got to go

-
Martin R
- Enthusiast
-
- Posts: 128
- Joined: Sat 07.07.2007, 19:49
- Location: Birmingham
by Sy V » Fri 13.02.2009, 07:07
Martin
I have an interface or indeed, an Elanscan laptop and interface you can borrow.
I'm off today but I'm meeting someone at Upton Warren this morning. I'll be in my watering hole this evening though.
Is that any good? You can borrow Stripey if you want - I don't use her.
Apologies for not noticing this dilemma earlier and really sorry to hear about you employment situation.
Let's get this sorted...
Sy
Talk and song from tongues of lilting grace, sounds caress my ears but not a word I heard could I relay, the story was quite clear - Robert PlantIn Respectful Memory - 21st March 1959 - 14th February 2016
-

Sy V
- LEC Godfather
-
- Posts: 5794
- Joined: Mon 21.04.2003, 07:06
- Location: Lydiate Ash, Bromsgrove, Worcestershire.
by Martin R » Fri 13.02.2009, 08:56
Simon, i will see you in the watering hole later. I only need the lead. I will try it over the weekend and see what i get. Thanks for the offer of the car but hopefully it will not come to that. I would hate to start getting up at the crack of dawn and start washing it

2 Lotus and ones got to go

-
Martin R
- Enthusiast
-
- Posts: 128
- Joined: Sat 07.07.2007, 19:49
- Location: Birmingham
by stonefish » Fri 13.02.2009, 23:17
hi,
ive got working elan scan and a spare o2 sensor sitting here...only problem is im in essex..and my s2 is off the road awaiting rear brake discs...too far for you to travel i think????
jeff
-

stonefish
- Tinkerer
-
- Posts: 71
- Joined: Tue 30.01.2007, 13:49
by Martin R » Sat 14.02.2009, 10:04
stonefish wrote:hi,
ive got working elan scan and a spare o2 sensor sitting here...only problem is im in essex..and my s2 is off the road awaiting rear brake discs...too far for you to travel i think????
jeff
Thanks for the offer but i should now be OK. Ive got the lead off Sy. I will give it all a try later after i have waved the Elise bye bye

2 Lotus and ones got to go

-
Martin R
- Enthusiast
-
- Posts: 128
- Joined: Sat 07.07.2007, 19:49
- Location: Birmingham
by Martin R » Sat 14.02.2009, 14:32
Can someone have a peep at this please. Its still running rough. The O2 sensor is working it did however jump a couple of volts suddenly a few times. Thoughts please ? I just started the car from cold and let it run under its own steam.
Edit, im not sure if the file is zipped right. If its not can i email the file to someone to zip it or take a look. Let me know if this works please.
Edit, post edited to remove none working attachment

Last edited by
Martin R on Sat 14.02.2009, 16:30, edited 2 times in total.
2 Lotus and ones got to go

-
Martin R
- Enthusiast
-
- Posts: 128
- Joined: Sat 07.07.2007, 19:49
- Location: Birmingham
by GeoffSmith » Sat 14.02.2009, 15:19
Something appears to be wrong with the zip file - e-mail me the raw .ecu file and I'll have a look.
Calypso Red S2 #417
USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
-

GeoffSmith
- Kitty Fiddler
-
- Posts: 15628
- Joined: Fri 03.02.2006, 21:57
- Location: S2#417 in Tytherington, Gloucestershire
-
Return to Ignition and fuelling
Who is online
Users browsing this forum: No registered users and 3 guests